Polychlorinated biphenyl은 잔류성 환경 오염물질로서, 다양한 생리 독성 때문에 인축에 대한 세부적 연구가 수행된 바 있다. 한편 포유동물을 대상으로 진행된 연구에서 hydroxy PCBs, PCB quinones, 및 methylsulfonyl PCBs 등의 대사물이 발견되었으며, 이들은 모화합물과는 상이한 독성을 나타낸다고 보고되었다. 그러나 이와 같은 동물에 대한 연구와 비교하여, 식물 및 토양 미생물에 대한 영향, 독성 등에 대한 연구는 매우 제한적이다. 일반적으로 식물의 경우, 농약 등과 같은 외래 물질 또는 자외선, 병원균 등의 외래 스트레스원의 작용을 받게되면, 특이 생물활성을 지닌 파이토알렉신 등의 이차 대사산물을 생합성하는 것이 알려져 있다. 본 연구에서는 수 종의 PCB 및 hydroxy PCB, phenol류 등을 화학적으로 합성하고, 이들의 처리에 따른 당근 중, 파이토알렉신인 6-메톡시멜레인 생합성에 미치는 영향을 검토하였다. 증류수를 처리한 대조구의 경우, 파이토알렉신의 농도는 처리 후 2일에 최대치까지 증가하였으며, 이후 지속적으로 감소하였다. 한편 2-hydroxy/4-hydroxybiphenyl의 경우, 처리 후 3일까지 증대한 반면, 비교적 지용성이 높은 PCB-126 및 3,5-dichloro-2-hydroxybiphenyl 처리구에서는 처리 1일 후, 최대치를 나타내어 화합물의 구조 또는 지용성 등에 따라 다른 유도효과를 나타내었다. 이상의 결과에 따라, 환경 오염물질의 성상에 따라, 토양 중, 재배 농작물의 생리 활성 2차 대사물질의 생합성이 다양하게 변화됨을 알 수 있었다.
석면이 발암물질로 지정 되면서 물리화학적 처리를 통하여 석면광물을 비섬유형으로 변형시키거나 또는 상전이시킴으로 광물 종을 변화시켜 무해화하는 연구가 진행되고 있다. 하지만 국내에서는 석면의 광물학적 특성과 함께 무해화가 가능함을 제시하는 연구만 진행되었을 뿐, 열처리에 따른 석면광물의 형태 및 결정구조 변화에 대한 연구는 미비한 실정이다. 따라서 본 연구에서는 국내에서 산출되는 백석면(chrysotile)과 석면형 투각섬석(asbestiform tremolite)에 대하여 열처리 전 후 석면의 형태 변화와 상전이에 따른 광물학적 특성을 전자현미경법으로 연구하였다. 백석면은 $850^{\circ}C$에서 2시간 동안 열처리된 후 감람석으로 상전이 되었으며, 석면형 투각섬석은 $1050^{\circ}C$에서 2시간 동안 열처리된 후 투휘석으로 상전이 되었다. 이러한 광물 상전이를 전자현미경법으로 연구한 결과, 두 석면은 섬유상 및 침상의 형태를 보이는 섬유다발이 열처리에 의해 끝이 매끄러운 주상의 형태로 변형되었으며, 분쇄하여도 벽개면, 섬유다발 등과 같은 형태로 발달하지 않음을 확인하였다. 또한 열처리에 따른 광물의 주 구성성분 변화 없이 결정구조의 변화가 일어남을 확인하였다. 이는 함수 규산염광물인 석면이 열에 의해 수산기(OH)가 제거되면서 광물의 상전이와 결정구조의 변화가 나타난 것으로 사료된다. 이처럼 전자현미경법은 석면의 형태, 화학성분, 그리고 결정구조의 변화를 동시에 확인 할 수 있어 광물 상전이에 따른 석면의 무해화를 연구하는데 효과적인 방법으로 판단된다.
For the purpose to clarify the effects of nursing, intervention with comfort measures which promote rest, exercise and sleep on the patient′s rehabilitation, this study was carried out on 119 postoperative patients at St. Mary′s Hospital, the National Medical Center and Seoul Red Cross Hospital during the 9 months period from March 1971 to November 1971. In this study one experimental nursing approach was utilized; an emphasis on interpersonal techniques along with physical care-comfort measures. A daily evening care including support and instruction was given to facilitate interaction of nursing to the experimental group by the investigator. For the control group, routine hospital nursing care was performed. The nursing observation was followed for 4 days postoperatively and recorded in check list. The results of the findings were as follows. 1. 3.5% of control group and 32.3% of experimental group got out of bed within 24 hours postoperatively. 38.6% of control group got out of bed within 72 hours postoperatively where only 16.1% of the experimental group did (x$^2$= 19.865, p<0.005). Interaction in nursing is, in turn, significantly more effective than the usual routine care in improving rate of healing. 2. The irritations and tension that may interfere patient′s sleep and rest at night can be reduced to a minimum if nursing environment is better controlled with planned nursing care for individual patient. Various treatments which tend to give patient discomfort may preferably be performed before 6 p.m. if not absolutely indicated. 3. During 4 days of observation the patients without administration of sedatives and analgesics postoperatively were 25.9% in the experimental group where as 10.5% in the control group. The frequency of administration of sedatives and analgesics in average was 1.4 in the experimental group, and 2.0 in the control group. This indicates that not all postoperative discomforts expressed by the patients should be regarded as incision pain, and those discomforts could be relieved to a certain extent by nursing interventions effectively. 4. There were significant differences between the responses to nursing care given in the experimental group and 33% of the control group in average through 4 days of observation responded "good". 3.6% of the experimental group and 17. 1% of the control group responded "poor" in this study. It was recommended that the study be replicated in a more defined and controlled manner. Some alternative areas for investigation were suggested.
고온 열수송용 재료로 이용되는 Hastelloy X의 표면처리에 따른 고온물성 개선에 대한 연구를 수행하였다. Hastelloy X 기판 상에 각각 PVD법인 Arc discharge 및 Sputtering을 이용하여 TiAlN 및 $Al_2O_3$ 박막을 표면 코팅(overlay coating) 하였고, 분위기 분말을 이용하여 Al을 금속표면을 통해 확산시키는 방법인 Pack cementation법을 이용한 Al 확산코팅(diffusion coating: aluminiding)법을 이용한 표면처리를 수행하였다. 이들 표면처리가 Ni-Cr계 합금의 고온열처리에서 생성되는 두꺼운 불균질 산화물($Cr_2O_3$)형성 억제에 미치는 효과와 조성 및 표면미세구조가 물성에 미치는 영향에 대해 알아보기 위해, 표면처리 된 Hastelloy X 샘플들을 공기 및 헬륨가스 분위기에서 $1000^{\circ}C$로 열처리 하였으며, 열처리된 전후 시편들에 대해 상형성, 미세구조 및 고온 물성 변화를 측정하였다. 이러한 실험결과를 통하여 표면코팅법에 의한 TiAlN 및 $Al_2O_3$ 박막에 비해 Al 확산코팅한 경우 두꺼운 불균질 산화물($Cr_2O_3$)형성이 억제되어 보다 균질한 미세구조와 높은 내마모성 등 높은 고온 안정성을 보여주는 것을 확인할 수 있었다.
Park, HyungBin;Ko, ChungHo;Lee, SeungYoun;Kim, SangYong;Yang, JongCheol;Lee, KiCheol
Journal of Ecology and Environment
/
제43권2호
/
pp.254-262
/
2019
Background: To exploit the ornamental and medicinal purposes of Lonicera harae Makino, L. subsessilis Rehder, L. praeflorens Batalin, and L. insularis Nakai, native to Korea, it is necessary to understand their seed ecology for propagation. In this study, we investigated the seed dormancy type and germination characteristics of seeds of the four Korean native Lonicera species. Results: The seeds of the four Lonicera species imbibed water readily, suggesting that the species do not have physical dormancy. Furthermore, the seeds exhibited underdeveloped embryos with only about 15-25% of the length of the seeds at dispersal. The embryos grew to the critical length with approximately 50-80% of the length of the seeds' development before radicle protrusion. Further, 94.4% and 61.1% of freshly matured seeds of L. insularis and L. harae germinated within 4 weeks after sowing at 15 ℃ and 20 ℃, respectively. Contrarily, L. praeflorens and L. subsessilis seeds did not germinate within 4 weeks under all temperature treatments. At 15 ℃, L. praeflorens seeds started to germinate from 5 weeks and the final germination rate was 51.1% at 13 weeks. At 15 ℃, L. subsessilis seeds started to germinate from 5 weeks after sowing and the final germination rate was 85.6% at 17 weeks after sowing. Embryo growth and germination of L. praeflorens and L. subsessilis occurred at a relatively high temperature (≥ 15 ℃). Conclusions: Overall, L. insularis seeds have only morphological dormancy. The seeds of L. harae have approximately 60% and 40% of morphological dormancy and morphophysiological dormancy, respectively. Contrarily, L. praeflorens and L. subsessilis exhibited non-deep simple-type morphophysiological dormancy that requires relatively high temperature (≥ 15 ℃) for embryo growth and dormancy breaking. The optimum temperature for the germination of seeds of L. insularis, L. harae, L. praeflorens, and L. subsessilis was 15 ℃, 20 ℃, 15 ℃, and 20 ℃, respectively. There was interspecific variation in seed dormancy and germination patterns in the four Lonicera species. The difference in these characteristics within the four Lonicera species could be useful for understanding the seed ecophysiological mechanisms of Lonicera species.
Statement of problem: Titanium has many advantages of high biocompatibility, physical properties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast for surface treatment prior to porcelain application, the researches are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength of surface roughness between titanium and porcelain with the same surface topography. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 8 groups - group P : polished with #1200 grit SiC paper, group S10 : $1.0{\mu}m$ surface roughness with sandblasting, group S15 : $1.5{\mu}m$ surface roughness with sandblasting, group S20 : $2.0{\mu}m$ surface roughness with sandblasting, group S25 : $2.5{\mu}m$ surface roughness with sandblasting, group S30 : $3.0{\mu}m$ surface roughness with sandblasting, group S35 : $3.5{\mu}m$ surface roughness with sandblasting, group E : $1.0{\mu}m$ surface roughness with HCl etching. Results: Within the confines of our research, the following results can be deduced. 1. In the results of 3-point bending test, the bond strength of sandblasting group showed significant differences from one of polishing group, acid etching group(P<.05). 2. The bond strength of sandblasting groups did not show significant differences. 3. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The bond strength of sandblasting group was higher than 25 MPa, the requirement of ISO 9693. Conclusion: In above results, bond strength of titanium and low-fusing porcelain is influenced more to surface aspect than surface roughness. And titanium has clinically acceptable bond strength below surface roughness of $3.5{\mu}m$.
유치열이 혼합치열기를 거쳐 영구치열로 교환되는, 소아 및 청소년기에서는 맹출장애가 흔히 관찰된다. 이로 인해 치아의 맹출시기를 놓치게 되면 심미적 문제 인접치아의 전위 및 치근흡수, 부정교합 등의 많은 문제를 야기한다. 치아 중 제1대구치는 특히 교합 및 발육에 중요하게 관여하며 기능적, 형태적으로 건전한 교합의 발육 및 유지에 필수적인 치아이다. 그러므로 이들 이상증례를 조기에 파악하고 문제점에 대응하는 것은 보다 적절한 교합관리에 중요한 부분이라 할 수 있다. 상악 제1대구치의 맹출장애는 크게 맹출지연, 매복, 일차정체 및 이차정체로 나누어서 생각할 수 있다. 매복의 원인 중 물리적 장애물이 존재할 경우 우선 이를 제거하고 치아발육 상태에 따라 제거 후 관찰, 외과적 노출 또는 교정적 견인 등으로 치료가능하며 이소맹출에 의 한 매복일 경우 brass wire, pendulum applinace, 제2유구치 발치후 공간 유지 및 공간확보 등으로 치료를 할 수 있다. 본 증례들은 혼합치열기의 환아로서 맹출장애를 보이는 상악제1대구치의 진단 및 그에 따른 치료를 통해 양호한 치료결과를 보여 이를 보고하는 바이다.
Purpose: Recently, various metal primers have been developed, and these are known to increase the bond strength between metal and relining resin. In this study, the change in bond strength according to amount of thermocycling was evaluated. Materials and Methods: In this study, 216 specimens were fabricated. Tokuyama Rebase $II^{(R)}$(Tokuyama Corp., Japan) and $Kooliner^{(R)}$(GC America Inc., Japan) as relining material, and MR. $Bond^{(R)}$(Tokuyama Corp., Japan) and Alloy $Primer^{(R)}$(Kuraray Medical Inc., Japan) as a metal primers were used. Using Ni-Cr and various metal surface treatment methods, resin was bonded and the change in bond strength during thermocycling was measured. The data was analyzed by one-way ANOVA, t-test(p<.05 level of significance). Results: When comparing the groups with only sandblasting, rapid decrease in shear bond strength could be seen. In the groups using Tokuyama Rebase $II^{(R)}$, with the exception of the 1000 and 2000 cycle groups, each group showed statistically significant decrease in shear bond strength(p<0.05). In comparison according to relining materials, $Kooliner^{(R)}$ showed higher shear bond strength than Tokuyama Rebase $II^{(R)}$ in all groups. In groups using MR $bond^{(R)}$, $Kooliner^{(R)}$ had higher shear bond strength than Tokuyama Rebase $II^{(R)}$ but, there was no statistical significance(p<0.05). In the other groups, $Kooliner^{(R)}$ showed significantly higher shear bond strength(p<0.05). There was significant difference between groups with sandblasting and metal primer treatments(p<0.05). In comparison according to metal primer materials, Alloy $Primer^{(R)}$ showed the highest shear bond strength but there was no statistical significance(p>0.05). According to the number of thermocycling cycles, when using Tokuyama Rebase $II^{(R)}$, there were no significant differences between the 0, 1000 and 2000 cycle groups regardless of the type of metal primer. There were no differences between the 2000 and 3000 cycle groups. When using $Kooliner^{(R)}$, regardless of the type of metal primer, there were no significant differences between the 0, 1000, 2000 and 3000 cycle groups(p>0.05). Conclusion: The use of metal primers showed increase in bond strength, and the stability after to thermocycling has been authenticated. Thus, the use of metal primers in relining and rebasing of metal frameworks is essential. But when selecting the material various physical properties should be considered.
견관절에서 드물게 통증을 유발하는 견봉 골의 치료에 대해서는 아직까지 논란의 여지가 있으나 6개월 정도의 보존적 치료에도 호전이 없을 경우 수술적 치료를 고려하게 된다. 이 중 수술적 치료로는 관절경하 견봉 성형술이나 개방적 견봉 성형술, 골편 제거술 또는 고정술 등 다양한 방법들이 있으나 최근 긴장대 강선 고정법 및 골 이식술을 시행하여 골유합을 얻는 방법이 선호되고 있다. 저자들은 2001년 4월부터 2006년 4월까지 본원에서 경험한 8예를 대상으로 최종 추시 기간이 2년 이상 된 환자들을 대상으로 후향적 분석을 시도하였다. 평균 나이는 45세였으며 남녀 비는 2: 6 이었다. 액와면 단순 방사선 검사상 8예 모두에서 mesoacromion의 소견을 보였다. 증상발현에서 수술까지의 기간은 평균 10개월이었으며, 개방적 정복 및 내고정 그리고 골 이식술을 시행하였다. 술 전ASES 및UCLA 점수는 $47.3\pm24.4$ 및 $16.6\pm5.8$점에서 최종 추시 상 $88.8\pm7.3$ 및 $31.5\pm1.9$점으로 향상되었다. UCLA 점수상, 우수 1예, 양호 7예의 결과를 보여주었다. 본 연구를 통하여 견봉 골의 치료로써, 골 이식술과 개방적 정복술 및 K-강선을 이용한 긴장대강선 고정법으로 만족스러운 결과를 얻을 수 있었다.
Alkaline Peroxide Mechanical Pulping (APMP) of Pinus densiflora harvested from domestic mountains was explored. APMP contributes to various advantages including pulp quality, elimination of the need for a bleaching process, and energy savings. Sequential treatment of impregnation of bleaching chemicals and refining not only overcome the concern of alkaline darkening of wood chips during chemical impregnation, but it also brightens the chips to the desired brightness levels suitable for writing and printing papers. APMP pulping from Pinus densiflora was greatly influenced by the dosage levels of hydrogen peroxide and sodium hydroxide. Alkaline peroxide treatment was carried out by applying one of three levels of hydrogen peroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips) and one of three levels of sodium hydroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips). Other chemicals including a peroxide stabilizers and metal chelation were constantly added for all treatments. Chemical treatment with a liquor-to-wood ration of 9:1 was carried out in a laboratory digestor. Compared to BTMP, APMP pulping displayed outstanding characteristics including the less requirement of refining energy, the better improvement of tensile strength, the more reduction of shives, and the greater increase of pulp brightness. In particular, when 4.5% of hydrogen peroxide with impregnation during 90 minutes was used, the brightness of APMP reached 64.9% ISO. Even though bulk of APMP was decreased with the increase of sodium hydroxide, a better and improved balance could be achieved between optical and strength properties. The spent liquor obtained from the discharge of the impregnation process at the dosage level of 4.5% hydrogen peroxide exhibited an equal level of residual peroxide with BTMP. In conclusion, APMP pulping showed successful results with Pinus densiflora due to its better response to the development of optical and physical properties compared to TMP pulping.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.