• The Korean Journal of Physiology
• /
• v.2 no.1
• /
• pp.39-45
• /
• 1968

Recently, in this department, pressure-displacement curve and breaking tension of dog and human tympanic membrane were studied using intact, fresh or dried tympanic membrane attached to external auditory meatus. However, physical property, proper elasticity-Young Modulus, of the tympanic membrane has not been clarified yet. Present study is attempted to further clarify proper Young Modulus of tympanic membrane, and to distinguish possible difference between layer of stratum radiatum and layer of stratum circulare of tympanic membrane in breaking tension and in Young Modulus. Tympanic membrane was excised from sacrificed dog, and preparation was made into the size of approximately 1 mm in width and 3 mm in length. In fresh or dried tympanic membrane, which was dried at $80^{\circ}C$ for 24 hrs., some preparations were made along the long axis parallel to the fibers of radial direction, and others were made along the long axis perpendicular to the radial fibers-circular direction. Breaking tension and displacement according to loading, were measured and Young Modulus was calculated in tympanic membrane preparations under the different experimental conditions. Results obtained are summarized as follows : 1. Young Modulus of fresh tympanic membrane in radial direction was $6.57{\times}10^8\;dyne/cm^2$, and that of fresh preparation in circular direction was $1.68{\times}10^8\;dyne/cm^2$. The Young Modulus of fresh tympanic membrane in radial direction resembles to that of silk and whale moustache. In dried tympanic membrane, Young Modulus of preparation of radial direction was $30.2{\times}10^8\;dyne/cm^2$ and that of preparation in circular direction was $25.0{\times}10^8\;dyne/cm^2$. 2. Breaking tension of fresh tympanic membrane was 44.9 gm/mm in radial preparation, and 7.9 gm/mm in circular preparation. In dried tympanic membrane, breaking tension was 46.7 gm/mm in preparation of radial direction, and 17.2 gm/mm in preparation of circular direction. 3. Much smaller breaking tension of the circular preparation-one fifth to the radial preparation-seemed to be responsible for the higher incidence of circular fiber breaking in tympanic membrane performation caused by trauma or sudden change in atmospheric pressure. 4. The correlation seemed to be very close between breaking tension and Young Modulus in tympanic membrane.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.591-600
• /
• 2020

The decrease in the number of school-age population, the introduction of university evaluation and educational capacity enhancement projects have made the enrollment rate and employment rate important indicators. Accordingly, universities are making great efforts to improve the competitiveness of their universities by increasing students' major satisfaction. The purpose of this study is to find out whether art and music students major selection motivsion of affects major satisfaction for career preparation behavior. For this survey, students of arts and physical education at K University in Gyeonggi-do were surveyed and 197 questionnaires were used as analysis data. As a result of the study, it was found that major selection motivation had a significant static effect on career preparation behavior and major satisfaction, and major satisfaction was analyzed to have a complete mediating effect on the effect of major selection motivation on career preparation behavior. With on the results of this study, in the future, universities will need an efficient curriculum to enhance students' majors satisfaction. To that end, we should develop the theoretical and practical curriculum so that students can actively participate, operate programs such as operation of comparative subjects and on-demand education, and raise the level of education. To this end, the interest and active support of the industry-academia-research are required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.137-144
• /
• 2019

The purpose of this study is to investigate the relationship between the perception of dying with dignity and the quality of life based on the opinions of the Korean populations. The participants were selected using a stratified proportional allocation method and 1,000 adults aged between 19 and 74 years from 17 municipalities and provinces in Korea. The questionnaire consisted of 2 demographic items; 26 items on the quality of life scale; and 57 items on the perception of dying with dignity. The statistical methods used included frequency analyses, independent sample t-tests, and correlation analyses. The results showed that the quality of life was highest for the social life quality item, and that the participants who had experienced a death in the family were more likely to have statistically lower quality of life in physical, psychological, environmental, and social areas. In terms of the participants' perception on dying with dignity, the score for death preparation was the highest; specifically, the score for psychological/economic burden reduction was the highest. The quality of life of the participants showed a positive correlation in all aspects of the perception of dying with dignity: physical symptoms and control, death preparation, death environment, family and social relations, hospital treatment, psychological dignity, and spirituality. Other studies conducted with middle-aged populations showed that their quality of life was higher when they perceived the acceptance of death is important and were willing to participate in death preparation education. Therefore, in order to improve the quality of life and have a positive influence on the participants, educational programs on death preparation and dying with dignity considering all the areas of the perception of dying with dignity should be provided.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.17-17
• /
• 1992

The ceramic high transition temperature superconducting materials present many interesting characteristics that will be analysed from two points of view: physical behavior, and chemical aspects. From the first point of view, these materials display an enormous variety of different physical properties. At low doping levels the normal state shows antiferromagnetism and insulating behavior. At intermediate doping levels, an anomalous metallic state appears and, the optimum Tc in the superconducting state is generated. With increasing doping a normal metallic state develops and superconductivity starts to disappear. Many of the physical phenomena that describe the overall behavior when doping levels are changed will be discussed. From the poing of view of the chemical aspects. we well discuss some of the problems involved in the methods of preparation with particular emphasis on defects, crystal structures, critical currrents, and applications in technology.

• Journal of the Korean institute of surface engineering
• /
• v.24 no.2
• /
• pp.73-79
• /
• 1991

Recent studies son surface coatings have shown that the change of physical, chemical and crystallographic structure analysed and observed according to the deposition process variables has the effects on the resultant film properties. Under the same preparation condition conditions of the substrate and process variables, physical morphology variations characterized by substrate temperature and bias which offect the surface mobility of adatom and adhesion variations related to the formation of Ti interlayer were considered in the present study. Microhardness showed the highest value around 40$0^{\circ}C$ of the substrate temperature and increased with the substrate bias. Adhesion was improved with the increase of substrate temperature and bias. An interlayer of pure titanium formed prior to deposition of TiN improves the adhesion at its optimum thickness. These results were explained by the change of physical morphology and phase analysis.

• Advances in nano research
• /
• v.10 no.4
• /
• pp.327-337
• /
• 2021

In this review, composite structures are used for many industries for at least four decades. Polymeric composites are one of the important structures in the aerospace and aviation industry because of their high strength and low weight. In this comprehensive review, mechanical behaviors, physical and mechanical properties of polymeric composites, different types of reinforcements, different methods to fabricate polymeric composites, historical structural composite materials for aviation and aerospace industries, and also different methods for the characterization are reported. How to use various methods of composite preparation using different nanofillers as reinforcements and its effect on the physical properties and mechanical behavior of composites are discussed as well.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.245-262
• /
• 2012

The purpose of this study is to find out the differences in personality traits and preparation level of the baby boomers for the old age by the demographic factors and to analyze the effect of Big 5 on preparation for the old age. The 331 questionnaires were distributed among workers born in 1955 to 1963 in the Chunan industrial complex. And the frequency analysis, factor analysis, reliability analysis, t-test, ANOVA, hierarchical regression analysis for the collected data were conducted with program SPSS 18.0 The findings are as follows. First, there is a partial difference in personality and preparation for the old age by the demographic factors. Second, extraversion, openness to experience and conscientiousness from personality have a positive effect on physical preparation for the old age while neuroticism has a negative effect on it. And there is no relationship between agreeableness and personality. Third, conscientiousness, openness to experience and extraversion have a positive effect on social preparation for the old age, but neuroticism and agreeableness do no affect it. Fourth, neuroticism,extraversion,openness to experience and conscientiousness have a positive effect on economic preparation for the old age, but agreeableness does not have any relationship with economic preparation.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.593-600
• /
• 2019

The aim of this study is to enhance the level of life satisfaction of the elderly as the aging population grows in readiness for increased old age, beginning with interest in improving the quality of life of the elderly. For this purpose, the subtype of preparation for aging was set as multi-independent variables by organizing it into physical preparation for aging, economic preparation for aging, and emotional & social preparation for aging. Structural relationships between variables was identified by social support a parameter variable and life satisfaction a dependent variable. It was also verified that the social support between subtypes of preparation for aging and life satisfaction had a mediating effect. The subjects of this study are 4,058 elderly people who are over the age of 65. They were originally extracted from the 3rd and 5th additional survey of Korean Retirement and Income Study. For data analysis purposes, SPSS 25.0 and SPSS PROCESS macro v2.16 were used. The results of this study are as followed. The emotional & social preparation for aging not only had a significant direct effect on successful aging, but also resulted in indirect effect on successful aging through life satisfaction. On the basis of the results, this study provided the social welfare policy and practical suggestions to enhance the preparation for aging and social support, which are the key to improving life satisfaction of the elderly.

• Preventive Nutrition and Food Science
• /
• v.10 no.1
• /
• pp.88-91
• /
• 2005

To improve the physical properties of protein films, various plasticizers and cross-linking agents were used in the preparation of the films. For zein film, 3% polypropylene glycol with 3% glycerol was the best plasticizer, while 2.5% glycerol was the most suitable for soy protein isolate (SPI) film in terms of tensile strength (TS), % elongation, and water vapor permeability (WVP). Formaldehyde, glutaraldehyde, glyoxal, and cinnamaldehyde as cross-linking agents of protein films were used to further improve the physical properties of the films. All aldehydes used as cross-linking agent in this study improved TS of zein and SPI films. In particular, cinnamaldehyde was the best cross-linking agent due to its safety in foods. These results suggest that appropriate use of plasticizer and cross-linking agent like cinnamaldehyde should improve the physical properties of protein films for use in food packaging.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.2
• /
• pp.107-110
• /
• 2009

To investigate the interaction and skin damage of valsartan with polysorbate 80, the physical mixture of valsartan and polysorbate 80 was prepared and then its adhesion, dispersibility, DSC and skin damage in nude rats were investigated. The physical mixture of valsartan and polysorbate 80 appeared as an aggregated form and could hardly be dispersed in water. The DSC curve showed that physical mixture disappeared the intrinsic peaks of valsartan and polysorbate 80 at about $115^{\circ}C$ and $170^{\circ}C$, respectively. It appeared a new relatively broad endothermic peak at about $150^{\circ}C$, suggesting that valsartan was chemically interacted with polysorbate 80. Furthermore, it induced the severe skin irritation and damage in nude mice. Thus, polysorbate 80 must not be used in the preparation of valsartan-loaded pharmaceutical dosage forms.