• 한국지진공학회논문집
• /
• 제20권1호
• /
• pp.1-8
• /
• 2016

Permanent deformation plays a key role in performance based earthquake resistant design. In order to estimate permanent deformation after earthquake, it is essential to secure reliable response history analysis(RHA) as well as earthquake scenario. This study focuses on permanent deformation of an inverted T-type wall under earthquake. The study is composed of two separate parts. The first one is on the verification of RHA and the second one is on an effect of input earthquake motion. The former is discussed in this paper and the latter in the companion paper. The verification is conducted via geotechnical dynamic centrifuge test in prototype scale. Response of wall stem, ground motions behind the wall obtained from RHA matched pretty well with physical test performed under centrifugal acceleration of 50g. The rigorously verified RHA is used for parametric study to investigate an effect of input earthquake motion selection in the companion paper.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.93-99
• /
• 1998

Mathematical model can be obtained by physical law or engineering theory. However it is always incomplete expression of the real system. In active controls to suppress vibration due to earthquake or wind load, modeling errors can often cause the problems of instability and performance degradation. In this paper, robust optimal controller design method using H$\infty$ control theory is developed for the systems which have uncertain natural frequency and design constraints. Numerical results show that the proposed H$\infty$ controller can avoid the performance degradation due to several errors and has better performance than conventional LQR method.

• 한국지진공학회논문집
• /
• 제20권4호
• /
• pp.201-209
• /
• 2016

Damages of large embankment dams by recent strong earthquakes in the world highlight the importance of seismic security of dams. Some of recent dam construction projects for water storage and hydropower are located in highly seismic zone, hence the seismic performance evaluation is an important issue. While state-of-the-art numerical analysis technology is generally utilized in practice for seismic performance evaluation of large dams, physical modeling is also carried out where new construction technology is involved or numerical analysis technology cannot simulate the behavior appropriately. Geotechnical centrifuge modeling is widely adopted in earthquake engineering to simulate the seismic behavior of large earth structures, but sometimes it can't be applied for large embankment dams due to various limitations. This study proposes a dynamic centrifuge testing method for large embankment dams and evaluated its applicability. Scaling relations for a case which model scale and g-level are different could be derived considering the stress conditions and predominant period of the structure, which is equivalent to previously suggested scaling relations. The scaling principles and testing method could be verified by modified modeling of models using a model at different acceleration levels. Finally, its applicability was examined by centrifuge tests for an embankment dam in Korea.

• 한국지진공학회논문집
• /
• 제20권5호
• /
• pp.277-283
• /
• 2016

Unreinforced masonry (URM) buildings are known to be highly vulnerable to seismic loadings. Although significant physical variation may exist for URM buildings that fall into a same structural category, a single set of fragility curves is typically used as a representation of the seismic vulnerability of the URM structures. This study investigates the effect of physical variation of URM structures on their seismic performance level. Variables that describe the physical variation of the structure are defined based on the inventory analysis. Seismic behavior of the structures is then monitored by changing the variables to investigate the effect of each variable. The analysis results show that among the variables considered the seismic performance of URM building depends on the variation of the width, the aspect ratio, and the number of story. The need for further research on the modeling of the connections between the walls and diaphragms and the torsional effect is also addressed.

• 한국지구과학회지
• /
• 제41권3호
• /
• pp.238-247
• /
• 2020

미국 남캘리포니아 지진센터에서 개발한 광대역 강지진동 모사 플랫폼을 이용하여 한반도 중대규모 지진에 대해서 부지 효과를 고려한 강지진동 지진파형 모사를 수행하고 진도 감쇠 특성을 분석하였다. SCEC BBP는 시나리오 지진에 대해 광대역(0-10 Hz)으로 지진 파형을 생성 할 수 있는 소프트웨어 플랫폼이다. 본 연구에서는 5가지 모델링 방법론 중 Song Model을 사용하였다. 규모 6.0, 6.5, 7.0의 지진에 대해서 각각 약 50회의 지진 모델링을 수행하였으며 부지효과(V_S30)를 고려하기 전과 후에 계산된 합성 지진 파형으로부터 최대 지반 가속도(PGA), 최대 지반 속도(PGV)와 같은 최대지진동 대표값을 산출하였다. 산출된 최대지진동 대표값은 계기진도 변환식을 이용하여 진도분포로 변환하였다. 부지효과 고려 시에는 V_S30속도에 따라 연약지반 또는 충적층 지역에서 진도값이 증폭되어 나타남을 확인하였다.

• 한국지진공학회논문집
• /
• 제11권4호
• /
• pp.43-51
• /
• 2007

Liquefaction-induced lateral spreading continues to be a major cause of damage to deep foundations. Currently there is a huge uncertainty associated with the maximum lateral pressures and forces applied by the liquefied soil to deep foundations. Furthermore, recent centrifuge and is shaking table tests of pile foundations indicate that the permeability of the liquefied sand is an extremely important and poorly understood factor. This article presents experimental results and analysis of one of the centrifuge tests that were conducted at the 150 g-ton RPI centrifuge to investigate the effect of soil permeability in the response of single piles and pile groups to lateral spreading.

• 한국지구과학회지
• /
• 제40권1호
• /
• pp.56-67
• /
• 2019

본 연구에서는 미국 남캘리포니아 지진센터에서 개발한 물리적 지진모델링 기반 광대역 강지진동 모사 플랫폼(버전 16.5)을 활용하여, 규모 6.0, 6.5, 7.0 지진에 대한 진도 감쇠 특성 분석을 수행하였다. 지진 발생 위치는 2016년 규모 5.8 경주 지진 진앙 인근을 가정하였으나 지각 전파 모델의 경우 남캘리포니아 강지진동 모사 플랫폼에서 제공하는 미국의 대표적인 지각 모델 두 개를 사용하였다. 하나는 판 내부를 대표하는 미국 중동부 지역(Central and Eastern United States, CEUS) 모델이고 다른 하나는 판의 경계를 대표하는 미 서부 지역(LA Basin) 모델이다. 버전 16.5 플랫폼에는 5개의 모델링 방법론이 제시되고 있으며 본 연구에서는 Song 모델과 Exsim 모델을 사용하였다. 동일 규모의 지진이라 하더라도 지진발생 환경이 다른 지역(CEUS vs LA Basin)에서는 같은 진앙 거리에서 진도 2 등급에 가까운 차이가 발생할 수 있음을 본 연구를 통해서 발견하였다. 본 연구에서 나타난 지역별 진도 감쇠 특성의 차이를 감안할 때 한반도에서 좀 더 정밀한 지진재해 평가를 위해서는 지역에 적합한 진도 감쇠 특성을 이해하는 것이 중요할 것으로 판단되며 본 연구는 지역 특화된 진도 감쇠 특성을 고려하지 않을 경우 진도 감쇠 분포의 불확실성 정도를 잘 보여준다.

• 지구물리
• /
• 제5권4호
• /
• pp.305-319
• /
• 2002

지자기수직탐사(GDS; Geomagnetic Depth Sounding)에서의 차이 지시자(difference arrow)의 유용성을 조사하기 위하여 3차원 MT(Magneto-Telluric)모델링을 수행하였다. 본 연구에서는 3차원 전도체와 해양의 공간적 위치 및 전도체의 크기에 따른 차이 지시자의 특성을 조사하였다. 전도체가 지표에 존재할 때 본 연구에서 사용된 모델의 경우 사용된 주기가 장주기(40분 이상)거나 해양과의 거리가 멀어지면(150 km 이상) 상호결합이 무시할 정도로 약해 차이 지시자가 유의미하였다. 그러나 전도체가 심부에 매몰된 경우 차이 지시자의 유용성은 그 크기에 의존적이며 전도체가 충분히 큰 경우 상호결합이 장주기까지 영향을 미칠 수 있다는 가능성을 확인하였다. 또한 수직적으로 확장된 전도체의 경우 전 주기에서 상호결합이 강화되어 장주기에서도 차이 지시자의 유용성을 확신할 수 없었다. 따라서 획득된 유도 지시자로부터 해양처럼 이미 알고 있는 전도체의 효과를 제거하기 위해서는 전도체 간의 상호 결합에 대한 정보가 요구되며 유용성이 확인된 차이 지시자는 물리적 지지를 바탕으로 지하 구조에 대한 정보를 제공할 것이다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2004년도 대한지구물리학회.한국지구물리탐사학회 공동학술대회 초록집
• /
• pp.232-237
• /
• 2004

Anatahan Volcano in the Commonwealth of the Northern Mariana Islands (CNMI) erupted for the first time in recorded history on 10 May 2003. The underwater acoustic records of earthquakes, explosions, and tremor produced during the eruption were recorded on a sound-channel hydrophone deployed in February 2003. Acoustic propagation models show the seismic to acoustic conversion at Anatahan is particularly efficient, aided by the slope of the seamount toward the hydrophone. The hydrophone records confirm the onset of earthquake activity at 01:53Z on 10 May, as well as the onset (at ${\~}$06:20Z) of continuous, low-frequency (5-40 Hz) acoustic energy that is likely volcanic tremor related to magma intrusion. The hydrophone recorded a total of 458 earthquakes associated with the eruption. To predict the character of acoustic signals generated from Anatahan, we developed a moment-tensor representation of a volcano-seismic source that is governed by the geometry of the source and the physical properties of the magma. A buried magmatic pipe model was adopted, and numerically modeling source parameters such as the pipe radius and magma viscosity enable us to grasp the inward nature of Anatahan Volcano.

• Advances in Computational Design
• /
• 제2권4호
• /
• pp.257-271
• /
• 2017

There are many plain concrete arch bridges in Iran that have been used as railway bridges for more than seventy years. Owe to the fact that these bridges have not been designed seismically, and even may be loaded under high-speed trains, evaluation of fundamental frequencies of the bridges against earthquake and high-speed train vibrations is necessary for considering dynamics effects. To evaluate complex behavior of these bridges, results of field tests are useful. Since it is not possible to perform field tests for all arch bridges, these structures should be simulated correctly by computers for structural assessment. Several parameters are employed to describe the bridges, such as number of spans, length of spans, geometrical and material properties. In this study, results of field tests are used for modal analysis and adapted for 64 three dimensional finite element models with various physical parameters. Computer simulations show length of spans has important effect on fundamental frequencies of plain concrete arch bridge and modal deformations of bridges is in longitudinal and transverse directions. Also, these results demonstrate that fundamental frequencies of bridges decrease after increasing span length and number of spans. Plus, some relations based in the number of spans (n) and span length (l) are proposed for calculation of fundamental frequencies of plain concrete arch bridge.