• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.237-242
• /
• 2012

In this study, the skin moisturing effect and stability of cream containing L. cuneata G. Don extract (ethyl acetate fraction) were evaluated. The skin hydrating effect of the cream containing extract was 1020% higher than the placebo cream, and the TWEL of the cream containing extracts was decreased to $7.7g/m^2h$ compared to the control ($10.2g/m^2$) and placebo cream ($8.9g/m^2$). The pH, viscosity, and absorbance were measured under the 4, 25, 37, $45^{\circ}C$ and the sun light during the 12 weeks. The pH change between cream containing extract and placebo cream did not show the significant difference under the 4, 25, 37, $45^{\circ}C$ except for the sun light. Both creams showed high decrease (about 59%) of viscosity at $45^{\circ}C$. However, there was no significant change under other conditions. The absorbance of the cream containing the extract and the placebo cream was decreased similarly at all conditions. This decrease in absorbance was relatively small compared to the decrease of absorbance of the extract in ethanol solution under the sun light (Fig. 7). In addition, any change in color or smell of the cream was not observed during the 12 weeks. Also physical changes as creaming and cohesion were not shown. These results indicate that the cream containing L. cuneata extract has the skin moisturizing effect and is relatively stable. Therefore, it is suggested that the ethyl acetate fraction of L. cuneata extract could be applicable to cosmetics as a new cosmetic material with its antioxidative and antibacterial activities reported previously.

• Journal of muscle and joint health
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The joint diseases threaten modern people's healthy life. They bring about a long pain, an anasarca, loss of joint function or even deformation and rigidity of joint, limiting people's ordinary activities much. The chronic joint patients may be subject to some hypochondria caused by anxiety for their life, social isolation, financial problem and physical disability. Therefore, this population should continue to be duely taken care of by medical personnels. In particular, nurses should adequately help these people to recover and improve their health through suitable adaptations. With such basic conceptions in mind, this study was aimed at reviewing these patients' conditions in their ordinary life before and after a plastic operation for artificial joint replacement as well as their satisfaction with their life. For this purpose, those patients who underwent some plastic operations for artificial joint replacement at university hospitals in Seoul from January 2, 1993 to June 30, 1995 were selected as the population of this study. Among them, 87 people were randomly sampled to answer a questionnaire designed specially. For the surveying tools, Jette's (1980) scale was applied to address the sample people's inconveniences experienced and supports received in their ordinary life, while the scale of Wood, Wylie & Sheafer was used to measure their satisfaction with their life. The collected data were analyzed for percentiles, means, SD, t-test and Pearson's correlations. The results of survey can be summarized as follows ; As a result of t-test the frequencies of other people's support before and after the plastic operation, it was disclosed that those who underwent the operation were supported less frequently. In addition, as a result of t-testing their satisfaction with life before and after the operation, it was found that the operation increased their satisfaction with life significantly. Meanwhile, as a result of t-test inconveniences, frequencies of supports and life satisfaction before and after the plastic operation for artificial knee replacement, it was disclosed that only the inconveniences were significantly reduced after the operation. In contrast, the t-test the variables before and after the plastic operation for artificial hip replacement, it was found that only the frequencies of other people's supports were significant reduced after the operation. Furthermore, the differences 6 months, one year and two years after the plastic operation for artificial joint replacement were t-tested on the variables. As a result, it was disclosed that people's inconvenience, frequencies of supports and life satisfaction were not improved 6 months after the operation but their frequencies of supports decreased significantly one year after, while their inconveniences and life satisfaction were significantly improved two years after. As a result of analyzing the variables with Pearson's correlations, inconveniences and frequency of supports were negatively correlated significantly with the life satisfaction. In conclusion, the plastic operation for artificial joint replacement significantly improved people's living inconveniences, reduced their frequency of other people's support and enhanced their satisfaction with life. To break don the plastic operation for artificial knee replacement improved patients' inconveniences, while the plastic operation for artificial hip replacement not only improved patients' inconveniences but reduced the frequencies of other people's support also. Finally, the finding that the plastic operation for artificial joint replacement brought about the improvement two years after suggests that this period is needed for the patients to adapt themselves to the post-operation conditions.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.367-375
• /
• 1990

In order to determine the effects of bedrock, organic matter, calcium and iron oxide on the soil aggregation, this research has performed with soils from bedrock regions of Limestone, Granite and Granite gneiss. This research was also to estimate how organic matter, calcium and iron oxide influence on soil aggregation under different forest conditions in various bedrock regions. And it also had a purpose to rate physical factors relevant to soil aggregation, their characteristics and aggregate diameter which closely relates to stabilities in the process of soil erosion. The following conclusions have been drawn in response to the overall research objectives. The rates of the soil aggregation on different bedrock regions were 21% in Limestone bedrock, 19.8% in Granite bedrock and 9.9% in Granite gneiss bedrock. A main factor in soil aggregation was the orgainc matter content in soils and the rate of soil aggregation increased in the constant proportion with the organic matter content. The relation could be formulated into Y=4.31X-4.37(Y : aggregation ratio X : organic matter content). The soil aggregation ratio under the deciduous forests eras higher than that under the coniferous forests. It was considered that this resulted from differences in organic matter content. Soil aggregates with larger diameter than 0.5mm were found more in Limestone bedrock than other smaller size soil aggregates of 0.25mm diameter were more distributed in Granite gneiss bedrock. Granite bedrock region had normal distribution in soil aggregate sizes with the highest frequency of 0.5mm diameter. Calcium and iron oxides had only partial influences on the soil aggregation in some specific conditions. But in Limestone bedrock region calcium influenced on the soil aggregation with the organic matter content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.392-406
• /
• 1985

The soil management practices before transplanting the ginseng plant were studied with two organic matter sources such as a traditional organic matter (wild grass) and commercial organic fertilizer (byproducts of amino acid fermantation) during the late spring to late autumn. During the soil management practices, the soil received 40kg N/10a from five different combination treatments with above two organic matter sources, a wild grass and a commercial organic fertilizer. After the application of the treatments, the soil were ploughed regularly at the interval of 20 days and the changes of physicochemical properties during the soil management practices were investigated. The next year after soil management practices, ginseng plants were transplanted to each treatment, growth and the content of some organic components of ginseng plant were measured for comparision of the different treatments. 1. The decrease in bulk density observed during the first 40 days of management was considered to be the effect of the improved physical conditions caused by ploughing, The decrease in bulk density observed after 40 days of management was considered to be the effect of organic matter. Similar results were observed in particle density, however porosity increased with time. 2. Soil pH tended to decrease during the first 40 days of management, after which period the pH increased and was stabilized. However, CEC increased with organic matter treatment and the exchangeable $NH^+_4-N$ and $NO^-_3-N$ increased in 20 and 40 days after the management practices, respectively, and after that period it became steady. 3. The decomposition rate of treated organic matter was measured by the incubation test in laboratory conditions. The rate of decomposition was rapid during the first 20 days of management, after which period it showed slight changes. 4. The weight of ginseng root significantly increased in the treatment of 10kg N/10a organic fertilizer and 30kg N/10a wild grass. 5. The saponin content of ginseng root was highest in the 40kg N/10a wild grass treatment. The addition of organic fertilizer at the rate of more than 20kg N/10a caused the decrease in the saponin content.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.133-146
• /
• 2021

Aragonite is one of common polymorphs of calcium carbonate (CaCO₃) and formed via biological or physical processes through precipitation in many different environments including marine ecosystems. It is noted that aragonite formation and growth as well as the substitution of trace elements such as strontium (Sr) in the aragonite structure would be dependant on several key parameters such as concentrations of chemical species and temperature. In this study, properties of the incorporation of Sr into aragonite were investigated over a wide range of various saturation conditions and temperatures similar to the marine ecosystem. All pure aragonite samples were inorganically synthesized through a constant-addition method with varying concentrations of the reactive species ([Ca]=[CO₃] 0.01-1 M), injection rates of the reaction solution (0.085-17 mL/min), and solution temperatures (5-40 ℃). Pure aragonite was also formed even under the Sr incorporation conditions (0.02-0.5 M, 15-40 ℃). When temperature and saturation index (SI) with respect to aragonite increased, the crystallinity and the crystal size of aragonite increased indicating the growth of aragonite crystal. However, it was difficult to interpret the crystal growth rate because the crystal growth rate calculated using BET-specific surface area was significantly influenced by the crystal morphology. The distribution coefficient of Sr (K_Sr) into aragonite decreased from 2.37 to 1.57 with increasing concentrations of species (Ca²⁺ and CO₃^2-) at a range of 0.02-0.5 M. Similarly, it was also found that K_Sr decreased 1.90 to 1.54 at a range of 15-40 ℃. All K_Sr values are greater than 1, and the inverse correlation between the K_Sr and the crystal growth rate indicate that Sr incorporation into aragonite is in a compatible relationship.

• The Korean Journal of Archival Studies
• /
• no.18
• /
• pp.3-36
• /
• 2008

Despite the institutional, organizational, and technological advances in the level of national records management that has occurred during the past several years, there has been no significant change in the condition of records management within individual public institutions, which may be an outset for records management. In order to begin the advance in national records management with overall innovation in records management by public institutions, it is necessary to distinctly set up the direction of innovation and a project to carry out. Also, a person in charge of records management, who is supposed to lead records management in each institution, should share the directions and projects. Against this backdrop, this study aims to define "the evaluation of records management" as a vehicle to establish a common goal for the innovation of records management and the role of a person in charge of records management as well as to develop evaluation indicators that might be applicable to all public institutions. With this aim, the study drew requirements of records management from domestic and overseas cases in the evaluation of records management conditions as well as the laws and standards of records management, and a roadmap for national records management innovation. Then, the study developed evaluation indicators by classifying the requirements according to three areas involving an organizational environment, records management job, and records management in the offices that create and file their own documents. The organizational environment area is concerned with the evaluation of the records management policy and the responsibility of an institution, and the evaluation of human resources and physical environment. The records management business area includes the measurement of the level of jobs, such as the records creation control conducted by the records management authority of each institution, the management of records schedules, the accession, preservation, and appraisal of records and their service, and the monitoring of records management. The area of records management in the offices is composed of the creation, registration, arrangement, and transfer of records as they are intended to be used during the monitoring of records management conditions. The study made it possible to measure all evaluation indicators with a quantitative evaluation method by clearly proposing the standard for objective and accurate evaluation.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.128-137
• /
• 2019

A lithium is the lightest metal on the earth. It has some attractive characteristics as a negative electrode material such as a low reduction potential (-3.04 V vs. SHE) and a high theoretical capacity ($3,860mAh\;g^{-1}$). Therefore, it has been studied as a next generation anode material for high energy lithium batteries. The thin lithium electrode is required to maximize the efficiency and energy density of the battery, but the physical roll-press method has a limitation in manufacturing thin lithium. In this study, thin lithium electrode was fabricated by electrodeposition under various conditions such as compositions of electrolytes and the current density. Deposited lithium showed strong relationship between process condition and its characteristics. The concentration of electrolyte affects to the shape of deposited lithium particle. As the concentration increases, the shape of particle changes from a sharp edged long one to a rounded lump. The former shape is favorable for suppressing dendrite formation and the elec-trode shows good stripping efficiency of 92.68% (3M LiFSI in DME, $0.4mA\;cm^{-2}$). The shape of deposited particle also affected by the applied current density. When the amount of current applied gets larger the shape changes to the sharp edged long one like the case of the low concentration electrolyte. The combination of salts and solvents, 1.5M LiFSI + 1.5M LiTFSI in DME : DOL [1 : 1 vol%] (Du-Co), was applied to the electrolyte for the lithium deposition. The lithium electrode obtained from this electrolyte composition shows the best stripping efficiency (97.26%) and the stable reversibility. This is presumed to be due to the stability of the surface film induced by the Li-F component and the DOL effect of providing film flexibility.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.1
• /
• pp.70-82
• /
• 2021

The purpose of this study is to reveal the tendency of planting design through the analysis of the planting of designer's gardens in the Suncheon Bay National Garden and to derive implications for future garden planting designs. The results of the study are as follows: First, the results of the study show that the practice of tree-based planting is still valid. Large growing trees such as 'Pinus densiflrora', 'Celtis sinensis', 'Zelkova serrata', 'Machilus thunbergii', 'Pinus strobus' overwhelmed the size of the designer's garden(150 to 390㎡). Second, the selection of trees tended to be made considering the designer's intention and the decorative effects rather than by considering the physiological and ecological conditions of the site. Third, among the herbaceous, the rate of the planting of perennials was high. Fourth, the flowering period of planted herbaceous was the most common in summer, followed by spring, fall, and winter. Fifth, the frequency color of the planted herbaceous was the most common in summer, followed by spring, fall, and winter. Fifth, in terms of flower color frequency, the most common was the yellow-series, followed by red-series, blue-series Sixth, average height herbaceous plants(20~60cm) were planted the most(47.4%). Seventh, structural plants that determined the garden's framework depended on trees, and the focal plants mainly utilized were evergreen trees, and the midrange plants were the planted herbaceous plants. The implications derived from the above findings are as follows: First, to ensure the garden's quality and sustainability, the selection of trees should be carefully considered, not considering only the artist's intention but also taking into account the physical and ecological conditions. Second, herbaceous plants can be used in various ways― the garden's focal plants, midrange plants, and ground covers, so more active herbaceous planting needs to be considered. Third, in consideration of the winter landscape, herbaceous planting using characteristics, such as fruits and stems, as well as flower colors should be considered. Fourth, blue and black color herbaceous plants have a noticeable effect even in a small amount, so it is necessary to plant them actively. Fifth, for the design of herbaceous planting, where the individual property of plants can be expressed, the design method should be considered.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.179-193
• /
• 2021

This study examines the use of satellite images for river classification and determination of stream reach, which is the first priority in the river environment assessment system. In the river environment assessment system used in South Korea, it is proposed to set a stream reach by using 10 or 25 times the width of the river based on the result of river classification. First, river classification for the main stream section of Cheongmi stream was performed using various river-related data. The maximum likelihood method was applied for land cover classification. In this study, Sentinel-2 satellite imagery, which is an open data technology with a resolution of 10 m, was used. A total of four satellite images from 2018 was used to consider various flow conditions: February 2 (daily discharge = 2.39 m³/s), May 23 (daily discharge = 15.51 m³/s), June 2 (daily discharge = 3.88 m³/s), and July 7 (daily discharge = 33.61 m³/s). The river widths were estimated from the result of land cover classification to determine stream reach. The results of the assessment reach classification were evaluated using indicators of stream physical environments, including pool diversity, channel sinuosity, and river crossing shape and structure. It is concluded that appropriate flow conditions need to be considered when using satellite images to set up assessment segments for the river environment assessment system.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.