• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.590-593
• /
• 2004

Extraction of ocean surface current velocity offers important physical oceanographic parameters especially on understanding ocean environment. Although Remote Sensing techniques were highly developed, the investigation of ocean surface current using Synthetic Aperture Radar (SAR) is not an easy task. This paper presents the results of ocean surface current observation using Doppler Centroid of ERS-1 SAR data obtained off the coast of Korea peninsula. We employed the concept, in which Doppler frequency shift and the ocean surface current are closely related, to evaluate ocean surface current. Moving targets cause Doppler frequency shift of the back scattered radar waves of SAR, thus the line-of-sight velocity component of the scatters can be evaluated. The Doppler frequency shift can be measured by estimating the difference between Doppler Centroid of raw SAR data and reference Doppler Centroid. Theoretically, the Doppler Centroid is zero; however, squinted antenna which is affected by several physical factors causes Doppler Centroid to be nonzero. The reference Doppler Centroid can be obtained from measurements of sensor trajectory, attitude and Earth model. The estimated Doppler Centroid was compensated by considering the accurate attitude estimation of ERS-1 SAR. We could verify the correspondence between the estimated ocean surface current and observed in-situ data in the error bound.

• 대한수학교육학회지:학교수학
• /
• 제7권4호
• /
• pp.391-402
• /
• 2005

도형의 무게중심에 대한 일반적인 고찰은 삼각형의 무게중심에 대한 오개념을 올바르게 이해하게 해 주며, 일반화와 특수화, 해의 존재성과 유일성, 실세계의 수학적 모델링, 공리적 방법론 등과 관련하여 교육적으로 유익한 논의를 유발시킨다 는 점에서 가치가 있다. 본 연구는 무게중심에 대한 오개념의 파악과 해소를 위한 수학적 분석을 제시했으며, 다각형의 무게중심을 구하는 학생들의 잘못된 전략을 분석하여 교육적인 시사점을 얻었다. 또한, 다각형 무게중심의 탐구과정에서 제기될 수 있는 논리적 문제를 밝히고 해결하였다.

• Steel and Composite Structures
• /
• 제22권5호
• /
• pp.1073-1084
• /
• 2016

Rectangular concrete-filled steel tubular columns with unequal wall thickness were investigated in the paper. The physical centroid, the centroidal principal axes of inertia, and the section core were given. The generalized bending formula and the generalized eccentric compression formula were deduced, and the equation of the neutral axis was also provided. The two rectangular concrete-filled steel tubular stub specimens subjected to the compression load on the physical centroid and the geometric centroid respectively were tested to verify the theoretical formulas.

• 한국학교수학회논문집
• /
• 제9권1호
• /
• pp.93-104
• /
• 2006

삼각형의 무게중심은 물리적인 성질이지만 대부분의 교사와 학생들은 실험단계를 거치지 않기 때문에 수학적인 정의와 물리적인 성질의 관계에서 많은 오개념을 가지고 있다. 본 연구에서는 무게중심에 대한 교사의 실험정도와 교사의 이해정도를 조사하고 수학영재반 기초과정 학생들이 무게중심에 대한 원리를 이해했을 때 어느 정도 무게중심의 개념을 일반화하는지를 연구하였다.

• East Asian mathematical journal
• /
• 제29권4호
• /
• pp.425-447
• /
• 2013

Since the center of mass of mathematics curriculum in middle school is dealt with only on triangle and it is defined as just an intersection point of median lines without any physical experiments, students sometimes have misconception of the centroid as well as it is difficult to promote divergent thinking that enables students to think the centroids of various figures. To overcome these problems and to instruct effectively the centroid unit in middle school mathematics classroom, this study suggests a teaching and learning method for the unit which uses physical experiments, drawing, and calculation methods sequentially based on the investigation of students' understanding on the centroid of triangle and the analysis of the mathematics textbooks.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.11-20
• /
• 2005

This study has a purpose on contributing to apprehend safe and right way to stop to the inline skate beginners and to the instructors who teaches line skating on the basis for the result of the kinematical analysis on Heel brake stop movement of the inline skate, focusing on the displacement on COG, angle displacement of ankle joint, angle displacement of knee joint, angle displacement of hip joint, using a 3D image method by DLT. To achieve this goal, we analysed the kinematical factor of the 3 well-trained inline skating instructors and obtained the following results. 1. During the movement of heel-brake stop, when strong power was given to a stable and balanced stop and the lower limbs, if the physical centroid is lowered the stability increases, and if it is placed high from the base surface, as the stability decreases compared to the case of low physical centroid, we should make a stop by placing a physical centroid in the base surface and lowering the hight of physical centroid. 2. To make a stable and balanced stop and to provide a strong power to the lower limbs, it is advisable to make a stop by decreasing an angle displacement of ankle joint during a "down" movement. In case of the left ankle joint, in all events and phases the dorsiflexion angle showed a decrease. Nevertheless, in the case of the right ankle joint, the dorsiflexion angle shows an increase after a slight decrease. The dorsiflexion angle displacement of ankle joint can be diminished because of the brake pad of the rear axis frame of the right side inline skate by raising a toe, but cannot be more decreased if certain degree of an angle is made by a brake pad touching a ground surface. To provide a power to a brake pad, it is recommended to place a power by lowering a posture making the dorsiflexion angle of the left ankle joint relatively smaller than that of the right ankle. 3. To make a stable and balanced stop and to add a power to a brake pad, the power must be given to the lower limbs in lowering the hight of physical centroid. For this, it is recommended to make a down movement by decreasing the flexion angle of a knee joint and it is necessary to make a down movement by a regular decrease of the angle displacement of knee joint rather than a swift down movement in every event and phase. 4. The right angle displacement of hip joint is made by lowering vertically the hight of physical centroid as leaning slightly forward. If too narrow angle displacement of hip joint is made by leaning forward too much, the balance is lost during the stop by placing the center in front. To make a stable and balance stop and to place a strong power to the lower limbs, it is recommendable to make a narrow angle by lower the hip joint angle. However, excessive leaning of the upper body to make the angle too narrow, can cause an instable stop and loss of physical centroid. After this study, it is considered to assist the kinematical understanding during the heel brake stop movement of the inline skate, and, to present basic data in learning a method of stable and balanced stop for the inline skating beginners or for the inline skate instructors in the present situation of the complete absence of the study in inline skating.

• 대한원격탐사학회지
• /
• 제29권1호
• /
• pp.11-20
• /
• 2013

인공위성 Synthetic Aperture Radar(SAR)는 물리해양학적 현상을 정량적으로 관측하는데 가장 유용한 도구 중의 하나이다. SAR의 도플러 편이(Doppler shift) 현상은 센서와 해양표면 유체와의 상대적인 움직임 차이로 인해 발생될 수 있다. 따라서, 단 채널 SAR 원시자료에 기록된 도플러 정보는 해양의 유체 이동속도를 추정하는데 유용하다. 유체의 이동속도는 측정된 도플러 중심주파수(estimated Doppler centroid)와 예측된 도플러 중심주파수(predicted Doppler centroid) 사이의 차이를 측정함으로써 계산될 수 있다. 예측된 도플러 중심주파수는 표적이 움직이지 않는다고 가정했을 때의 중심주파수로서 위성의 궤도, 시선 각, 자세 등과 같은 기하모델을 통해 계산될 수 있고, 측정된 도플러 중심주파수는 실제 SAR 촬영시 표적의 움직임에 해당하는 도플러 중심주파수로서 원시자료에 기록된 정보를 이용하고 평균상관계수법(Average Cross Correlation Coefficient; ACCC)을 적용하여 추출될 수 있다. 이렇게 추출된 도플러 속도에서 브래그 공명을 일으키는 표면 장력파의 위상속도를 제거하여 좀더 정밀한 표층 해류의 속도를 추출하였다. 이러한 기법들을 동해를 촬영한 Envisat ASAR 원시자료에 적용하였으며, 추출된 해류속도를 HF-radar에서 관측한 해류속도와 비교하였다.

• Journal of Astronomy and Space Sciences
• /
• 제22권3호
• /
• pp.273-282
• /
• 2005

주간에 활용될 수 있는 별 센서의 성능을 알아보기 위해, 주간 별 센서 관측 모델을 개발하였다. 주간 동안 별 센서가 감지하게 될 별들에 대한 중심찾기 오차는 그 모델을 사용해서 계산되었다. 별 센서가 운용되는 주간 환경의 대기 물리량을 계산하기 위해 표준 대기 모델(LOWTRAN7)이 사용되었다. 주간 별 센서 관측 모델에는 별과 태양 사이의 다양한 분리각, 중심찾기 알고리즘, 그리고 별 센서의 다양한 시스템 특성이 고려되었다. 개발된 별 센서 모델은 벡터 관측을 통한 자세결정 성능의 예측에 있어서 보다 현실적인 오차 정보를 제공하게 될 것이다.

• 대한정형도수물리치료학회지
• /
• 제23권1호
• /
• pp.73-78
• /
• 2017

Background: The purpose of this study was to identify the effects of morphological Change of cervical spine to apply to neck retraction and extension regarding the straight deformity of cervical spine. Methods: A 40-year male subject with straight deformity of cervical spine participated in this study. The study subject underwent a cervical lateral radiography on the static position, neck retraction and neck extension on standing. Measurement method were using computer-based digital radiogram on a picture achieving computer system forthe centroid method, Cobb's angle and Jackson's angle. Results: Neck retraction was increased kyphosis on the C2-4 with lordosis on the C5-7. Neck extension was increased lordosis on the C2-7. Conclusions: These findings suggest that neck retraction was increased kyphosis and neck extension was increased lordosis based on the straight deformity of cervical spine. Therefore, we should be consider that neck extension exercise when increased lordosis for the patients of straight deformity of cervical spine.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.497-506
• /
• 1997

In this paper described is the software developed to calculate the physical properties of arbitrary section shape. The software consists of arbitrary section display module(ASDM) and section property calculation module(SPCM). ASDM defines and displays the shape of arbitrary section and SPCM calculates its properties such as area, centroid, moment of inertia, torsional constant, etc.. In many cases, calculation of section properties is not easy because user has to define the vertex coordinates which are difficult to do so in the case of arbitrary section. In the developed software, however, since user is asked to define only points of central lines and thickness of arbitrary section, the calculattion task of arbitrary section is very effective.