• 제목/요약/키워드: photovoltaic system

검색결과 1,975건 처리시간 0.023초

DPLL을 이용한 능동적 단독운전방지를 위한 무효전력변동법 (Reactive Power Variation Method for Anti-islanding Using Digital Phase-Locked-Loop)

  • 이기옥;유병규;유권종;최주엽;최익
    • 한국태양에너지학회 논문집
    • /
    • 제28권2호
    • /
    • pp.64-69
    • /
    • 2008
  • As the grid-connected photovoltaic power conditioning systems (PVPCS) are installed in many residential areas, these have raised potential problems of network protection on electrical power system. One of the numerous problems is an Islanding phenomenon. There has been an argument that it may be a non-issue in practice because the probability of islanding is extremely low. However, there are three counter-arguments: First, the low probability of islanding is based on the assumption of 100% power matching between the PVPCS and the islanded local loads. In fact, an islanding can be easily formed even without 100% power matching (the power mismatch could be up to 30% if only traditional protections are used, e.g. under/over voltage/frequency). The 30% power-mismatch condition will drastically increase the islanding probability. Second, even with a larger power mismatch, the time for voltage or frequency to deviate sufficiently to cause a trip, plus the time required to execute a trip (particularly if conventional switchgear is required to operate), can easily be greater than the typical re-close time on the distribution circuit. Third, the low-probability argument is based on the study of PVPCS. Especially, if the output power of PVPCS equals to power consumption of local loads, it is very difficult for the PVPCS to sustain the voltage and frequency in an islanding. Unintentional islanding of PVPCS may result in power-quality issues, interference to grid-protection devices, equipment damage, and even personnel safety hazards. Therefore the verification of anti-islanding performance is strongly needed. In this paper, improved RPV method is proposed through considering power quality and anti-islanding capacity of grid-connected single-phase PVPCS in IEEE Std 1547 ("Standard for Interconnecting Distributed Resources to Electric Power Systems"). And the simulation results are verified.

비정질 p-SiC/i-SiC/i-Si/n-Si 박막 태양전지에서 i-SiC 완충층의 역할 (Roles of i-SiC Buffer Layer in Amorphous p-SiC/i-SiC/i-Si/n-Si Thin Film Solar Cells)

  • 김현철;신혁재;이재신
    • 한국재료학회지
    • /
    • 제9권12호
    • /
    • pp.1155-1159
    • /
    • 1999
  • 플라즈마 화학증착 (PECVD) 장비를 이용하여 $SnO_2$ 투명전도막이 피막된 유리기판 위에 p-SiC/i-Si/n-Si 이종접합 태양전지를 제작하였다. p-SiC 층의 증착중에 기체조성 x=$CH_4/\;(SiH_4+CH_4)$의 변화에 대한 태양전지의 광기전 특성을 관찰하였다. 기체조성(x)이 0~0.4의 범위에서 p-SiC 창층의 광학적 밴드갭의 증가로 인하여 태양전지의 효율은 증가하였으나, 그 이상의 기체조성에서는 p-SiC/i-Si 계면에서의 조성불일치가 증가하여 태양전지의 효율이 감소하였다. 이러한 계면문제는 p-SiC 층과 i-Si 계면에서의 조성불일치가 증가하여 태양전지의 효율이 감소하였다. 이러한 계면문제는 p-SiC 층과 I-Si 층 사이에 I-SiC 완충층을 삽입함으로써 크게 감소하였다. 그 결과 유효면적이 $1cm^2$인 glass/$SnO_2$/p-SiC/i-SiC/i-Si/n-Si/Ag 구조의 박막 태양전지는 100mW/$cm^2$ 조도 하에서 8.6%의 효율을 나타내었다. ($V_{oc}$=0.85V, $J_{sc}$=16.42mA/$cm^2$, FF=0.615)

  • PDF

고분자 보호 필름을 적용한 태양광 모듈의 출력 및 신뢰성에 관한 연구 (A Study on the Output and Reliability Characteristics of Ultra Barrier Film PV Module)

  • 임종록;신우균;윤희상;김용성;주영철;고석환;강기환;황혜미
    • 한국태양에너지학회 논문집
    • /
    • 제39권5호
    • /
    • pp.1-10
    • /
    • 2019
  • Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

a-SiOx:H/c-Si 구조를 통한 향상된 밴드 오프셋과 터널링에 대한 전기적 특성 고찰 (Electrical Properties for Enhanced Band Offset and Tunneling with a-SiOx:H/a-si Structure)

  • 김홍래;팜뒤퐁;오동현;박소민;라벨로 마테우스;김영국;이준신
    • 한국전기전자재료학회논문지
    • /
    • 제34권4호
    • /
    • pp.251-255
    • /
    • 2021
  • a-Si is commonly considered as a primary candidate for the formation of passivation layer in heterojunction (HIT) solar cells. However, there are some problems when using this material such as significant losses due to recombination and parasitic absorption. To reduce these problems, a wide bandgap material is needed. A wide bandgap has a positive influence on effective transmittance, reduction of the parasitic absorption, and prevention of unnecessary epitaxial growth. In this paper, the adoption of a-SiOx:H as the intrinsic layer was discussed. To increase lifetime and conductivity, oxygen concentration control is crucial because it is correlated with the thickness, bonding defect, interface density (Dit), and band offset. A thick oxygen-rich layer causes the lifetime and the implied open-circuit voltage to drop. Furthermore the thicker the layer gets, the more free hydrogen atoms are etched in thin films, which worsens the passivation quality and the efficiency of solar cells. Previous studies revealed that the lifetime and the implied voltage decreased when the a-SiOx thickness went beyond around 9 nm. In addition to this, oxygen acted as a defect in the intrinsic layer. The Dit increased up to an oxygen rate on the order of 8%. Beyond 8%, the Dit was constant. By controlling the oxygen concentration properly and achieving a thin layer, high-efficiency HIT solar cells can be fabricated.

공동주택 태양광발전 시스템의 경제성 평가 (Economic Analysis on a PV System in an Apartment Complex)

  • 김진형
    • 한국기후변화학회지
    • /
    • 제1권2호
    • /
    • pp.163-177
    • /
    • 2010
  • 본 논문은 1,185세대가 거주하고 있는 공동주택을 대상지로 하여 정부지원제도인 '태양광주택보급사업'과 '발전차액지원제도'를 각각 활용하여 PV 시스템 도입을 도입할 경우의 경제성을 비교 분석하였다. 각 시나리오별 분석 결과, 수익으로 전력판매수익 만을 고려한 경우, NPV가 보조금 지원제도는 -560백만원으로 분석되었고, 발전차액지원제도는 -87백만원으로 분석되었다. 전력판매수익과 온실가스 배출권 수익을 함께 고려한 경우에도 NPV가 보조금 지원제도는 -530백만원으로 분석되었고, 발전차액지원제도는 -57백만원으로 분석되어 모두 수익성이 없는 사업으로 나타났다. PV 시스템 도입으로 인해 회피되는 대기오염물질로 인한 사회적 편익을 함께 분석한 결과도 그 편익이 미미하여 여전히 경제성이 없는 것으로 평가된다. 할인율과 초기비용의 변동을 기준으로 민감도 분석을 한 경우, 보조금 지원제도의 경우에는 할인율을 3%까지 낮추고, 초기 설비 투자 비용을 정부 제시기준 단가인 721만원/kW에서 650만원/kW로 낮춘 것에 배출권 수익까지 포함한 경우에도 여전히 사업성이 없는 사업으로 나타났지만, 발전차액 지원 제도의 경우에는 배출권 수익을 포함하지 않고도 할인율 약 7.2%와 초기 설비투자비용 684만원/kW에서 각각 손익분기점이 되면서 수익성이 있는 사업으로 전환되어 발전차액지원제도가 PV 시스템 도입에 훨씬 유리한 것으로 나타났다. 사회적 비용을 고려한 경우에는 보조금제도를 활용한 모든 시나리오는 배출권 수익과 환경편익을 모두 포함하여도 수익성이 없는 사업으로 나타났으나, 발전차액지원제도를 활용한 시나리오의 경우에는 배출권 수입을 제외하고도 할인율 7.2%와 초기비용 686만원/kW가 각각 손익분기점이 되면서 수익성이 있는 사업으로 전환되었다. 본 연구의 결과, 할인율이 7.2% 이하가 되든지 초기 설비투자비용이 정부 제시 기준 단가보다 4.9% 낮아진다면 발전차액지원제도 하에서도 공동주택의 태양광발전시스템이 경제성을 갖는 것으로 분석되었다. 우리나라의 높은 아파트 보급률과 PV 시스템 도입으로 발생하는 긍정적인 사회적 환경적 편익을 고려하면 공동주택의 태양광 시설 설치에 대해 발전차액지원제도를 확대 지원함으로써 화석연료의 사용을 절감하고, 온실가스 배출을 줄여서 에너지자급도 제고와 기후변화에 대한 대응을 통해 녹색성장에 기여할 수 있을 것으로 생각된다.