• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.91-98
• /
• 2009

The titania nanotubular layer for photocatalytic application was synthesized by anodization process in HF solution and the photocatalytic efficiencies of nanotubular film were evaluated by the decomposition rate of aniline blue. In order to facilitate the photocatalytic reaction, the electron acceptors such as potassium bromate, hydrogen peroxide and ammonium persulfate were added to aniline blue solution and the effects of electron acceptors on the dye degradation efficiency were evaluated. The results showed that the photocatalytic efficiency has markedly improved by adding the electron acceptors.

• Journal of Korean Society on Water Environment
• /
• v.35 no.6
• /
• pp.550-556
• /
• 2019

This study was carried out to improve the photocatalytic reaction of TiO₂ photocatalyst. During the photocatalytic reaction, OH radicals are generated and they have an excellent oxidation capability for wastewater treatment. To evaluate the OH radicals generated according to crystallographic structure of TiO₂ nanotubes photocatalyst, a probe compound, 4-Chlorobenzoic acid was monitored to evaluate OH radical. Ultraviolet light was applied for photocatalytic reaction of TiO₂. The 4-Chlorobenzoic acid solution was prepared at laboratory. TiO₂ nanotube was grown on titanium plate by using anodization method. The annealing temperature for TiO₂ nanotube was varied from 400 to 900 ℃ and the crystal forms of the TiO₂ nanotube was analyzed. Depending on annealing temperature, TiO₂ nanotubes have shown different crystal forms; 100% anatase (0 % rutile), 18.4 % rutile (81.6 % anatase), 36.6 % rutile (63.4 % anatase) and 98.6% rutile (1.4% anatase). As the annealing temperature increases, the rutile ratio increases. OH radical generation from 18.4 % rutile TiO₂ nanotube plate was about 3.8 times higher than before annealing and 1.4 times higher than only 100 % anatase-TiO₂ nanotube. The efficiency of the 18.4% rutile TiO₂ nanotube was the best in comparison to TiO₂ nanotube with 18.4 %, 36.6 % and 98.6 % rutile. As a result, photocatalytic ability of 18.4 % rutile-TiO₂ nanotube plate was higher than 100 % anatase-TiO₂ nanotube plate.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.342-347
• /
• 2020

In this study, a portable total-phosphorus (TP) monitoring system utilizing a photocatalytic-reaction-based pretreatment method is proposed, fabricated, and characterized. Commercial TP monitoring systems are only used in laboratories because of their complex monitoring procedure, bulk-size, and high-cost. In particular, pretreatment in commercial TP monitoring systems is performed at high temperatures (> 120 ℃) and pressure (> 1.1 kg cm^-2) making it difficult to minimize the scale of the systems. The proposed TP monitoring system employs a pretreatment method with a photocatalytic reaction; thus, its size can be reduced, as photocatalytic reactions occur at room temperature and atmospheric pressure. Analytes with various TP concentrations are pretreated using the proposed portable TP monitoring system and are quantitatively measured with an LED and a photodiode.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.72-77
• /
• 1996

In the process of solar energy conversion into electrical energy using the photoelectrochemical cell containing the sensitizer, rose bengal and supersensitizer. $I^-$, the photocurrent is stabilized and durable. But the long time span of irradiation causes the decrease of photocurrent monotonically. Spectroscopic and electrochemical analyses of rose bengal solution containing $I^-$ revealed that the decrease of concentration of rose bengal was attributed to the reaction of rose bengal in the dark with $I_2$ formed as a result of the possible photocatalytic reaction of rose bengal with $I^-$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.49-49
• /
• 2003

Nanometer sized zinc oxide (ZnO) powder was synthesized by a novel "solution-combustion method" and its photocatalytic activity was evaluated with the recovery of Ag from a used photofilm developing solution. Different parameters affecting the reaction rates like wavelength of the W light used, reaction temperature, mass of the used photocatalyst, and effect of scavenger were tested. The optimum parameters were found as follows. UV wavelength of less than 385nm, reaction temperature between 40- 60 $^{\circ}C$, photocatalyst concentration of 3-6 g/1, and scavenger concentration of 0.3-0.4 g/1.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.33-38
• /
• 2015

In this study, flat-type photocatalytic reaction system is applied to reduce toxic hexavalent chromium (Cr(VI)) to trivalent chromium (Cr(III)) in aqueous solution under UV irradiation. To overcome the limitation of conventional photocatalysis, a novel approach toward photocatalytic system for reduction of hexavalent chromium including nanotubular $TiO_2$ (NTT) on two kinds of titanium substrates (foil and mesh) were established. In addition, modified Ti substrates were prepared by bending treatment to increase reaction efficiency of Cr(VI) in the flat-type photocatalytic reactor. For the fabrication of NTT on Ti substrates, Ti foil and mesh was anodized with mixed electrolytes ($NH_4F-H_2O-C_2H_6O_2$) and then annealed in ambient oxygen. The prepared NTT arrays were uniformly grown on two Ti substrates and surface property measurements were performed through SEM and XRD. Hydraulic retention time(HRT) and substrate type were significantly affected the Cr(VI) reduction. Hence, the photocatalytic Cr(VI) reduction was observed to be highest up to 95% at bended(modified) Ti mesh and lowest HRT. Especially, Ti mesh was more effective as NTT substrate in this research.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.10a
• /
• pp.329-332
• /
• 1998

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.637-646
• /
• 2001

VOC(Volatile Organic Compound) removal characteristics in continuous flow reactors have been numerically investigated. The photocatalytic reaction have been simulated with the binding constant and the reaction rate constant obtained from experimental data for the constant-volume batch reactor, and then VOC abatement in continuous flow reactors with the same conditions as those of batch reactor has been analyzed. The standard 4\kappa-\varepsilon$ model and mass conservation equation have been employed for numerical calculation, and heterogeneous reaction rate has been used in terms of the boundary condition of the conservation equation. in the case of the continuous flow reactor, reaction characteristics have been estimated with various inlet velocities and with different number of baffles. The result shows that the concentration distribution and flow patterns are strongly affected by the inlet velocity, and that with the increased inlet velocity, VOC removal rate is increased, while removal efficiency is decreased. This result may be useful in the design of reactors with improved VOC removal efficiency.

• Korean Journal of Materials Research
• /
• v.27 no.10
• /
• pp.569-575
• /
• 2017

To improve photocatalytic performance, a $PbS/ZnO/TiO_2$ nanotube catalyst was synthesized, and its surface characteristics and photocatalytic efficiency were investigated. The hybrid photocatalysts were produced by anodic oxidation and successive ionic layer adsorption and reaction(SILAR). The photocatalytic efficiency was evaluated using the dye degradation rate. The $PbS/ZnO/TiO_2$ photocatalyst significantly enhanced the photocatalytic activity for dye degradation, which was ascribed to the synergistic effect of their better absorption of solar light and a decrease in the rate of excited electron-hole recombination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5304-5309
• /
• 2013

The degradation of methylethylkeone(MEK) was investigated by the continuous single module photocatalytic reactor. Operational conditions were initial concentration of MEK, intensity of photon flux, and activity change according to the long time operation. The photocatalytic degradation was decreased with the increase of MEK concentration, and the degree of decrease was larger at higher flow rate. Removal efficiency of photocatalytic reactor was decreased with the increase of reactor diameter and lamp wavelength under the same residence time condition. Continuous single module photocatalytic reactor was successfully operated without any activity drop during 120hrs operation.