• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.42.1-42.1
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.219-220
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.240-245
• /
• 1994

Experiments on the drawability of squared boxes have been performed under various working conditions. In the present work, the pattern of material flow and the local change in the thickness of shell are used as the measures of drawability, and they are measured using the photo-etching technique. The effects of the size of draw bead, the magnitude of blank holding force and the condition of lubrication on the drawability of squared boxes have been analyzed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.2 s.121
• /
• pp.55-63
• /
• 2007

The purpose of this study is to create a planting design for progressive realization. For this, visual preferences as measured via questionnaire were evaluated by the Scenic Beauty Estimation(SBE) and paired comparison methods. The results can be summarized as follows. Through photo observation, the average visual blockage ratio was 38% and the range of degree of the visual blockage ratio was $30{\sim}50%$. The sketch simulation and filtered pattern received the highest preference score and fumed out to be the most practical pattern out of all the patterns evaluated. Also, in the sketch simulation, the high preference values were observed for a distance of 9 to 12m from the view point to the blockage tree with a D/H ratio of 2. The preference score significantly decreased with the increase of the visual blockage ratio having a turning point at $30{\sim}35%$ of the visual blockage ratio, even though the distance parameters were more important than the visual blockage ratio in the scores. An outstanding view must be handled properly to be preserved or accentuated. Framed, open, enclosed, screened or filtered pattern views should be completely revealed only from their best vantage point, not given away at first glimpse. It this sense, parallax spatial beauty with trees could be improved through the visual aspects of plan arrangements and seems to be an effective design technique for landscape planning and planting design.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.502-507
• /
• 2009

We present a real-time photomosaics method for small image set optimized by feature selection method. Photomosaics is an image that is divided into cells (usually rectangular grids), each of which is replaced with another image of appropriate color, shape and texture pattern. This method needs large set of tile images which have various types of image pattern. But large amount of photo images requires high cost for pattern searching and large space for saving the images. These requirements can cause problems in the application to a real-time domain or mobile devices with limited resources. Our approach is a genetic feature selection method for building an optimized image set to accelerate pattern searching speed and minimize the memory cost.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.440-443
• /
• 2010

We report a top-down approach based on atomic force microscopy (AFM) local anodic oxidation for the fabrication of the nano-pattern field effect transistors (FETs). AFM anodic oxidation is relatively a simple process in atmosphere at room temperature but it still can result in patterns with a high spatial resolution, and compatibility with conventional silicon CMOS process. In this work, we study nano-pattern FETs for various cross-bar distance value D, from ${\sim}0.5\;{\mu}m$ to $1\;{\mu}m$. We compare the optical characteristics of the patterned FETs and of the reference FETs based on both 2-dimensional simulation and experimental results for the wavelength from 100 nm to 900 nm. The simulated the drain current of the nano-patterned FETs shows significantly higher value incident the reference FETs from ${\sim}1.7\;{\times}\;10^{-6}A$ to ${\sim}2.3\;{\times}\;10^{-6}A$ in the infrared range. The fabricated surface texturing of photo-transistors may be applied for high-efficiency photovoltaic devices.

• MALSORI
• /
• no.57
• /
• pp.99-112
• /
• 2006

In this paper, we introduce two retrieval methods for photos with speech documents. We compare the pattern of speech query with those of speech documents recorded in digital cameras, and measure the similarities, and retrieve photos corresponding to the speech documents which have high similarity scores. As the first approach, a phoneme recognition scheme is used as the pre-processor for the pattern matching, and in the second one, the vector quantization (VQ) and the dynamic time warping (DTW) are applied to match the speech query with the documents in signal domain itself. Experimental results show that the performance of the first approach is highly dependent on that of phoneme recognition while the processing time is short. The second method provides a great improvement of performance. While the processing time is longer than that of the first method due to DTW, but we can reduce it by taking approximated methods.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.606-611
• /
• 2002

Welding using lasers can be mass-produced in high speed. In the laser welding, performing real-time monitoring system of the welding quality is very important in enhancing the efficiency of welding. In this study, the plasma and molten metal which are generated during laser welding were measured using the UV sensor and IR sensors. The results of laser welding were classified into five categories such as optimal heat input, little low heat input, low heat input, partial joining due to gap mismatch, and nozzle deviation. Also, a system was formulated which uses the measured signals with a fuzzy pattern recognition method which is used to perform real-time evaluation of the welding quality and the defects which can occur in laser welding.

• Laser Solutions
• /
• v.3 no.2
• /
• pp.53-61
• /
• 2000

On the laser weld production line, a slight alteration of the welding condition produces many defects. The defects are monitored in real time, in order to prevent continuous occurrence of defects, reduce the loss of material, and guarantee good quality. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in CO$_2$ laser welding. For high speed CO$_2$ laser welding, laser tailored welded blanks for example, on-line weld quality monitoring system was developed by using fuzzy multi-feature pattern recognition. Weld qualities were classified optimal heat input, a little low heat input, low heat input, and focus misalignment, and final weld quality were classified good and bad.

• Journal of Engineering Education Research
• /
• v.16 no.2
• /
• pp.24-30
• /
• 2013

This paper deals with the measurement theory and technique of linear expansion coefficient for solid material using Michelson interferometer. The Michelson interferometer produces interference fringes by splitting a beam of monochromatic light so that one beam strikes a fixed mirror and the other a movable mirror. When the reflected beams are brought back together, an interference pattern results. Precise distance measurements until a quarter of wave length can be made with the Michelson interferometer by moving the mirror and counting the interference fringes which move by a photo diode. This paper represents the application of Michelson interferometer for measuring infinitesimal length system and shows the measurement method of linear expansion coefficients for various materials like copper, aluminum and iron. the results are good agreement with theoretical value within margin of error for each materials.