• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.114-123
• /
• 2000

The flow structure around a rotating axial-fan was experimentally investigated using a phase averaging velocity field measurement technique. The fan blades were divided into 4 different phases, for which 500 velocity fields were acquired for each phase angle with a 2-frame PTV system. Velocity field measurements were also carried out at two planes parallel to the axis of rotation, with offsets toward the radial direction of the fan. For accurate synchronization of the PTV system with the phase of the axial fan, two synchronization circuits were employed with a photo-detector attached to the rotating shaft. The phase averaged velocity fields show periodic variations with respect to the blade phase. The periodic formation of vortices at the blade tip is also observed in vorticity contour plots. Locations of local maximum turbulence intensities in the axial and radial directions are found to be located in an alternating pattern. These experimental results can be used to validate numerical calculations and to understand the flow characteristics of an axial fan.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1244-1247
• /
• 2004

For obtaining the best panel quality of color filter on array(COA) architecture in TFF LCD, we investigated the influence of deposition temperature, $O_2$ flow, thickness on the optical transmittance, wet etching and adhesion properties of IZO deposited onto each color photo resist(red, green, blue). Average transmittance of the pixel single layer in the visible range(between 380 and 780nm) was mainly affected by thickness and showed maximum at 1250 ${\AA}$ while the thickness showing peak transparency in each R, G, B wavelength was different. The relation was calculated by using bi-layer transmission and reflectance model, which corresponded to experimental data very well. The adhesion of IZO deposited on each color PR was found to have enhanced value except red PR case, compared to that of IZO which was deposited on $SiN_x$. Wet etching pattern linearity was decreased as the thickness increased. The thickness of IZO was one of vital factors in order to optimize overall pixel process for fabricating COA structure.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1489-1500
• /
• 2018

Partial shading analysis of large-scale photovoltaic (PV) arrays has recently become a theoretically and numerically challenging issue, and it is necessary for PV system designers. The main contributions of this study are the following: 1) A PSIM-based macro-model was employed because it is remarkably fast, has high precision, and has no convergence issues. 2) Three types of equivalent macro-models were developed for the transformation of a small PV sub-array with uniform irradiance to a new macro-model. 3) On the basis of the proposed new macro-model, a tearing method was established, which can divide a large-scale PV array into several small sub-arrays to significantly improve the efficiency improvement of a simulation. 4) Three platforms, namely, PSIM, PSpice, and MATLAB, were applied to evaluate the proposed tearing method. The proposed models and methods were validated, and the value of this research was highlighted using an actual large-scale PV array with 2420 PV modules. Numerical simulation demonstrated that the tearing method can remarkably improve the simulation efficiency by approximately thousands of times, and the method obtained a precision of nearly 6.5%. It can provide a useful tool to design the optimal configuration of a PV array with a given shading pattern as much as possible.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.155-165
• /
• 2006

The present article describes the experimental and theoretical observations on the formation of holographic, polymer-dispersed, liquid crystals and electrically switchable, photonic crystals. A phase diagram of the starting mixture of nematic liquid crystal and photo-reactive triacrylate monomer was established by means of differential scanning calorimetry (DSC) and cloud point measurement. Photolithographic patterns were imprinted on the starting mixture of LC/triacrylate via multi-beam interference. A similar study was extended to a dendrimer/photocurative mixture as well as to a single component system (tetra-acrylate). Theoretical modeling and numerical simulation were carried out based on the combination of Flory-Huggins free energy of mixing and Maier-Saupe free energy of nematic ordering. The combined free energy densities were incorporated into the time-dependent Ginzburg-Landau (Model C) equations coupled with the photopolymerization rate equation to elucidate the spatio-temporal structure growth. The 2-D photonic structures thus simulated were consistent with the experimental observations. Furthermore, 3-D simulation was performed to guide the fabrication of assorted photonic crystals under various beam-geometries. Electro-optical performance such as diffraction efficiency was evaluated during the pattern photopolymerization process and also as a function of driving voltage.

• 대한전자공학회논문지SD
• /
• 제43권8호
• /
• pp.1-5
• /
• 2006

본 논문은 극자외선 리소그래피용 마스크의 결함을 극자외선을 이용하여 검출하는 방법과 기존의 가시광선을 이용하여 결함을 검출해 내는 시스템과 비교하고, 인위적으로 만들어진 결함을 이용하여 극자외선이 결함에 조사되었을 때의 반사되는 패턴을 분석하였다. 포커스된 극자외선을 래스터 스캔 방식으로 조사하면서 반사되는 극자외선의 세기를 비교함으로서 결함을 발견해 내는 시스템을 구축하였고, 이를 이용하여 기존의 가시광선을 이용하는 결함 검출 장비와 상관 실험을 진행하여 반사된 빛의 세기로 예측한 결함의 크기가 두 검출 방법 사이에 강한 상관관계를 가짐을 확인하였다. 또한, 인광판을 이용하여 극자외선이 결함에 조사되어 반사되는 패턴을 영상화하여 크기별, 결함의 종류별로 다른 프린지 패턴을 가지는 것을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1649-1652
• /
• 2006

2.22-inch qVGA $(240{\times}320)$ amorphous silicon thin film transistor liquid active matrix crystal display (${\alpha}$- Si TFT-AMLCD) panel has been successfully demonstrated employing a 2.5 um fine-patterning technology by a wet etch process. Higher resolution 2.22-inch qVGA LCD panel with an aperture ratio of 58% can be fabricated because the 2.5 um fine pattern formation technique is combined with high thermal photo-resist (PR) development. In addition, a novel concept of unique ${\alpha}$-Si TFT process architecture, which is advantageous in terms of reliability, was proposed in the fabrication of 2.22-inch qVGA LCD panel. Overall results show that the 2.5 um finepatterning is a considerably significant technology to obtain higher aperture ratio for higher resolution ${\alpha}$-Si TFT-LCD panel realization.

• 복식
• /
• 제57권2호
• /
• pp.143-154
• /
• 2007

This study's purpose is how express gender image according to sex in editorial fashion photography. This study's objectives are the women's magazine Vogue, Harper's Bazaar and man's magazine GQ, Esquire published 2000-2005 within the country. The photography was classified with established a standard based on the precede studies. The photo is classified Gender image according to dress and its ornaments, model character and atmosphere by Sex Expression of femininity woman has exposure of body parts and emphasizing thin eyebrows and red lips, soft and mild image, modest and static pose. Man expressed femininity used ladylike color and pattern, erotic exposure of body and long hair style. Commonly emphasizing red lips, natural background of flower plant, S-line. For expression of masculinity man and woman are used masculinity item, short hair-style and thick eyebrows. And also emphasize square like chin and shoulder. Specially, woman used direct silhouette to conceal soft body curved line. The expressions of androgynous woman and man are colorful dress and make-up. Woman emphasized male face to show and man expressed soft image through hull of abundant material of fur. All two sex selected method that conceal body curved line and face to express sexless. Hiding characteristics of body and face make indistinct of sex. The gender is affected by atmosphere such as model and illumination background as much as clothes because of the editorial fashion photography.

• 한국의류학회지
• /
• 제39권2호
• /
• pp.307-322
• /
• 2015

This study develops textile designs and cultural fashion products with the image of 'Youngguchunhwa', which means the beautiful spring flowers of Jeju. Historical literature was reviewed to emphasize the authenticity of Halla Mountain and Youngguchunhwa. Consumers' responses to Halla Mountain, Baengnokdam, and Royal Azalea related to Youngguchunhwa were evaluated along with photos of Halla Mountain and Youngguchunhwa images upload on Internet during the last 2 years. The results of consumer survey and photo analysis confirmed the consumers' high preference and high association with the image of Jeju. The full-blown Royal Azaleas in the Seonjakjiwat field of Halla Mountain were used as motifs for the development of Jeju cultural products as a representative landscape showing the beautiful spring of Jeju. Six types of textile designs were developed by the repeated arrangement of the basic patterns of Halla Mountain, Baengnokdam, and Royal Azalea. Ladies' apparels products, children's wear, bags and cushions were made using oxford cotton fabrics printed with the textile designs. We suggest how pattern designs of the Youngguchunhwa image could be applicable and used for the development of other kinds of Jeju tourism souvenirs.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.85-88
• /
• 2009

This report demonstrates the immobilization of uniformly sized gold nanoparticles (AuNPs) on UV cross-linked poly(4-vinylpyridine) (P4VP) polymer thin films and the preparation of micropatterned structures of AuNPs on these films. The polymer thin films were prepared by a spin-coating of P4VP onto a cleaned silicon wafer surface. Upon UV irradiation, these films were then photo cross-linked. Gold nanoparticles were immobilized by immersing the polymer surface in a colloidal solution of gold nanoparticles stabilized by citric acid. The morphology of the films and the immobilization of AuNPs were studied by atomic force microscopy (AFM) and UV-visible spectroscopic techniques. The micropatterned gold structures that were produced on the polymer surface are delineated by combining with the photolithographic method. While untreated and simply spin coated films were physisorbed and unstable that could be easily removed by rinsing with a solvent, the cross-linked and AuNPs immobilized P4VP films were found to be highly stable even after repeated solvent extractions.

• Genomics & Informatics
• /
• 제2권2호
• /
• pp.92-98
• /
• 2004

A cDNA microarray experiment is one of the most useful high-throughput experiments in medical informatics for monitoring gene expression levels. Statistical analysis with a cDNA microarray medical data requires a normalization procedure to reduce the systematic errors that are impossible to control by the experimental conditions. Despite the variety of normalization methods, this. paper suggests a more general and synthetic normalization algorithm with a control gene set based on previous studies of normalization. Iterative normalization method was used to select and include a new control gene set among the whole genes iteratively at every step of the normalization calculation initiated with the housekeeping genes. The objective of this iterative normalization was to maintain the pattern of the original data and to keep the gene expression levels stable. Spatial plots, M&A (ratio and average values of the intensity) plots and box plots showed a convergence to zero of the mean across all genes graphically after applying our iterative normalization. The practicability of the algorithm was demonstrated by applying our method to the data for the human photo aging study.