• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.1-6
• /
• 2014

Here we report improved photo-catalytic effect of $Ag_2S$ under visible light using carbon nano-tubes (CNT) modified with $Ag_2S$ nanoparticles. The optical properties, structural properties and compositional analysis, as well as the photo-electrochemical properties of the prepared composites were investigated. It was found that the photocurrent density, and the photo-catalytic effect, was increased by modification of CNT in this way. Compared with the separate effects of $Ag_2S$ and CNT nanoparticles, the photocatalytic effect of CNT-modified-with-$Ag_2S$ composites, increased significantly due to a synergistic effect between the CNT and the $Ag_2S$ nanoparticles.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.502-507
• /
• 2015

We examined the photo catalytic activity and catalytic recyclability of CdSe/graphene nanocomposites fabricated via modified hydrothermal technique. The prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX), transmission electron microscopy (TEM), Raman spectroscopic analysis, and X-ray photoelectron spectroscopy (XPS). The photocatalytic behavior was investigated through decomposition of RBB as a standard dye under visible light radiation. Our results indicate that there is significant potential for graphene based semiconductor hybrids materials to be used as photocatalysts under visible light irradiation for the degradation of organic dyes from industry effluents.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.387-392
• /
• 2005

For the production of further functional bio-degradable plastic(polybutylene succinate:PBS) with $TiO_{2}$ as photocatalyst, which shows the decomposition of detrimental organic compound and pollutant under ultraviolet irradiation, we attempted to prepare $TiO_{2}$ coatings on PBS substrate by HVOF and plasma spraying techniques under various conditions. The microstructures of coatings were characterized with SEM and XRD analysis, and the photocatalytic efficiency of coatings was evaluated through the photo degradation of gaseous acetaldehyde. The effects of primary particle size and spraying parameters on the formation behavior, photo catalytic performance and mechanical characteristics of the coatings have been investigated. The results indicated that with respect to both the HVOF sprayed $P_{200}$ and $P_{30}$ coatings, the high anatase ratio off 100% can be achieved regardless of fuel gas pressure. On the other hand, the HVOF sprayed $P_{7}$ coating exhibited largely decreased anatase ratio (from 100% to 49.1%) with increasing the fuel gas pressure, which may be attributed to the much higher susceptibility to heat of 7nm agglomerated powder. In terms of photocatalytic efficiency, HVOF sprayed $P_{200}$ and $P_{30}$ coatings seem to predominate as compared to that of plasma sprayed $P_{200}$ coatings owing to the higher anatase ratio. However, the HVOF sprayed $P_{7}$ coatings didn't show the photo catalytic activity, which may result from the extremely small reaction surface area to the photo-catalytic activity and low anatase ratio. Such functional PBS with new roles is expected to cosiderably contribute to the reduction of aggravated environmel problem.

• 공업화학
• /
• 제19권3호
• /
• pp.270-276
• /
• 2008

$TiO_2$의 가장 큰 특징은 광촉매적 특성을 들 수 있으나 순수한 $TiO_2$는 자외선 영역에서만 활성을 보이는 단점이 있다. 단점을 보완하고자 본 연구에서는 초고온, 고활성을 이용한 열플라즈마 공정으로 질소가 도핑된 $TiO_2$를 합성하여 $TiO_2$의 광촉매적 특성을 높이고자 하였다. 직류 플라즈마 제트를 이용하여 비금속이온인 질소와 반응 가스인 산소를 $TiCl_4$와 함께 플라즈마 반응기 안에서 반응시켜 질소가 도핑된 $TiO_2$ 나노 분말을 합성하였다. 합성 조건으로 질소의 유량을 변화하였다. 합성 변수에 따른 입자의 상조성, 크기를 분석하였고 아세트알데히드와 곰팡이를 광분해하는 실험을 통해 광촉매 활성을 살펴보았다. 한편 $TiO_2$의 분말 상태와 코팅된 상태의 광촉매 특성을 비교하고자 합성한 분말의 스핀 코팅과 PLD (Pulsed Laser Deposition)을 통해 $TiO_2$를 코팅하였다. 아세트알데히드 분해 실험의 결과 질소가 도핑된 $TiO_2$ 분말의 경우가 순수한 $TiO_2$ 분말에 비해 가시영역에서의 광촉매 활성이 두 배 이상 뛰어난 것을 확인하였으며, 곰팡이 분해 실험 결과 역시 질소가 도핑된 $TiO_2$ 분말에 곰팡이가 분해되는 것을 확인하였다. 분말과 필름을 제조하여 메틸렌블루 광분해 실험한 결과 분말의 경우 100% $TiO_2$입자가 메틸렌블루 분해에 이용되며, 반면 스핀 코팅의 경우 바인더의 함량 때문에 20~30%의 $TiO_2$만이 분해에 이용되기 때문에, 분말의 경우 초기 30 mL 메틸렌블루를 한번에 분해할 수 있었다.

• Advances in nano research
• /
• 제5권4호
• /
• pp.373-392
• /
• 2017

Silver nanoparticles (AgNPs) were successfully synthesized through a simple green route using the Nelumbo nucifera leaf, stem and flower extracts. These nanoparticles showed characteristic UV-Vis absorption peaks between 410-450 nm which arises due to the plasmon resonance of silver nanoparticles. The Fourier transform infrared spectroscopy (FT-IR) confirmed the presence of amides and which acted as the stabilizing agent. X-ray diffraction spectrum of the nanoparticles confirmed the Face centered cubic (FCC) structure of the formed AgNPs. Dynamic light scattering technique was used to measure hydrodynamic diameter (68.6 nm to 88.1 nm) and zeta potential (-55.4 mV, -57.9 mV and 98.9 mV) of prepared AgNPs. The scanning electron micrographs of dislodged nanoparticles in aqueous solution showed the production of reasonably monodispersed silver nanoparticles (1-100 nm). The antimicrobial activity of prepared AgNPs was evaluated against fungi, Gram-positive and Gram-negative bacteria using disc diffusion method. Anti-corrosion studies were carried out using coupon method (mild steel and iron) and dye degradation studies were carried out by assessing photo-catalytic activity of Nelumbo nucifera extracts mediated AgNPs.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.33-37
• /
• 2016

10 wt.% and 20 wt.%$Li-TiO_2$ composite powders are synthesized by a sol-gel method using titanium isopropoxide and $Li_2CO_3$ as precursors. The as-received amorphous 10 wt.%$Li-TiO_2$ composite powders crystallize into the anatase-type crystal structure upon calcination at $450^{\circ}C$, which then changes to the rutile phase at $750^{\circ}C$. The asreceived 20 wt%$Li-TiO_2$ composite powders, on the other hand, crystallize into the anatase-type structure. As the calcination temperature increases, the anatase $TiO_2$ phase gets transformed to the $LiTiO_2$ phase. The peaks for the samples obtained after calcination at $900^{\circ}C$ mainly exhibit the $LiTiO_2$ and $Li_2TiO_3$ phases. For a comparison of the photocatalytic activity, 10 wt.% and 20 wt.% $Li-TiO_2$ composite powders calcined at $450^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$ are used. The 20 wt.%$Li-TiO_2$ composite powders calcined at $600^{\circ}C$ show excellent efficiency for the removal of methylorange.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.486-496
• /
• 2018

Bimetallic Pd@Ni nanostructure exhibited enhanced co-catalytic activity for the selective hydrogenation of benzaldehyde compare to their monometallic counterparts. Impregnation of these mono/bimetallic nanostructures on mesoporous $TiO_2$ leads to several surface modifications. The bimetallic PNT-3 ($Pd_3@Ni_1/mTiO_2$) exhibited large surface area ($212m^2g^{-1}$), and low recombination rate of the charge carriers ($e^--h^+$). The hydrogenation reaction was analyzed under controlled experiments. It was observed that under UV-light irradiations and saturated hydrogen atmosphere the bimetallic PNT-3 photocatalyst display higher rate constant $k=5.31{\times}10^{-1}h^{-1}$ owing to reduction in the barrier height which leads to efficiently transfer of electron at bimetallic/$mTiO_2$ interface.

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.9-14
• /
• 1989

Mixed photocatalyst containing cadmium sulfide and zinc sulfide was prepared on silica gel powder and Nafion film. Photo-irradiation of aqueous mixture containing the photocatalysis generated hydrogen by water cleavage reaction. Use of sodium sulfide as sacrificial reagent help the photo-reaction. Evolution of the hydrogen was measured by gas chromatographic analysis. Composition of the catalyst was determined by atomic absorption spectrophotometer. 0.2 mL of of hydrogen was generated per hour. The maximun catalytic activity was obtained after 8-12 hours later. Hydrogen generation efficiency by the two different catalytic system was compared and showed that the Nafion-based catalyst is more efficient than the silicagel-based catalyst for the photoreaction.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.531-534
• /
• 2015

In this work, we undertake a comparative study of the crystallographic microstructures and photo-catalytic properties of rutile $TiO_2$ nanorods grown on FTO facing up and down by a hydrothermal method. An analysis of the fine structures showed that $TiO_2$ nanorods grown on FTO facing up were mixed with sea urchin and microsphere. These structures induced a vertical orientation of the nanorods on FTO. The saturated photocurrent densities of the $TiO_2$ nanorods grown both up and down were $1.5mA/cm^2$ in the former case, the IPCE was increased to 10% at 300~350 nm. The onset potential (${\fallingdotseq}$ flat band potential) of the nanorods grown on FTO facing up is negatively shifted to a value of -0.31 V. This is caused by an increase in the surface state, in this case the number of oxygen vacancies, and by the formation of $Ti^{3+}$. Therefore, the FTO facing direction is considered as a critical factor during the hydrothermal reaction for $TiO_2$ growth so as to develop an efficient photo-catalytic system.

• Advances in nano research
• /
• 제16권1호
• /
• pp.41-52
• /
• 2024

In this study, rare-earth orthoferrites LnFeO₃ were synthesized using a facile hydrothermal reaction and their visible-light-induced photo-Fenton degradation of organics was optimized through Ln variation (Ln = La, Pr, or Gd). The morphological, structural, and chemical characteristics of as-prepared samples were examined in detail by using different methods, including XRD, SEM, TEM, XPS, etc. On the other side, under visible light illumination, the photo-Fenton-like catalytic activities of LnFeO₃ were assessed in terms of the removal of selected organic models, i.e., pharmaceuticals (ketoprofen and tetracycline) and dyes (rhodamine B and methyl orange). As compared with PrFeO₃ or GdFeO₃, the sample of LaFeO₃ displayed more structural distortion, larger specific surface area, and narrower band gap, resulting in its higher photo-Fenton-like catalytic activity toward the degradation of organics. In organic-containing solution, in which the initial solution pH = 5, catalyst dosage = 1 g/L and H₂O₂ concentration = 10 mM, 98.2% of rhodamine B, 31.1% of methyl orange, 67.7% of ketoprofen, or 96.4% of tetracycline was removed after 90-min exposure to simulated visible light. Our findings revealed that variation of Ln site on rare-earth orthoferrites was an effective strategy for optimizing their organic removal via visible-light-induced photo-Fenton reaction.