• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.95-97
• /
• 1988

A method of digital transmission line protection using travelling wave is presented. It is shown that the fault current appears as a difference of two quantities associated with the travelling wave at each terminal. The phasor of these quantities are extracted and transmitted to the other end via communication channel to detect the line fault.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.276-277
• /
• 2006

Estimation of power system frequency is an important task because frequency deviation is a good indicator of the system abnormal operating conditions. The algorithms, curve fitting, technique using Taylor series, deviation of phasor angle of fundamental waveform using DFT (Discrete Fourier Transform) and Prony method, are tested under operation of the frequency relaying by using EMTP MODELS. The performance of methods is compared with the simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.179-180
• /
• 2006

The real time monitoring of the power systems covering wide area are essential for the stable operation and control of the power system. Synchronized phasor measurement is a key for the precise monitoring and control of the power systems. In this paper, to suggest an appropriate network topology of Power Infrastructure Defense System(PIDS) and to estimate the maximum network bandwidth with using the network analyzer, we simulate a PIDS and analyze the network traffic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.387-389
• /
• 2006

This paper describes new on-line small signal stability assessment and its application using the time series simulated phasor measurement data. Using FFT technique and optimization method, the suggested method can effectively identify all of mode frequencies involved in measured data and calculate the damping ratio with accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1410-1412
• /
• 1999

Protective relay for transformer operates in general by comparing with the differential current and the restraint current. These kinds of currents are changed on magnitude and phasor during the fault according to winding type and vector group. This paper presents the differential and restraint currents and operational principle of differential protective relay for two-winding and three-winding transformer with graphical model. It is developed using MATLAB for an educational purpose on engineer related in power system and protection in university and power utility including large factory.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.143-146
• /
• 2001

본 논문에서는 다 채널 페이저 연산 장치를 전용하드웨어로 구현하기 위한 설계 구조에 대하여 제시하였으며, 이를 연산량이 많은 곱셈기를 시분할에 의해 공유하는 구조를 제시하였다. 또한 페이저 측정을 위한 Sliding-DFT 알고리즘을 순환 구현할 경우의 근사구현 오차에 관한 정량적인 연구를 수행하였다. 이러한 오차 영향의 해석을 기반으로 하여 곱셈기 공유 구조를 적용한 페이저 연산 장치를 설계하고, 설계한 하드웨어의 내부동작을 보여주는 시뮬레이션을 통해 설계의 정확성을 확인하였다

• 대한전기학회논문지
• /
• 제37권4호
• /
• pp.197-204
• /
• 1988

A simple method that estimates the torque fluctuations in induction motor driven by CSI under steady state condition is presented and that uses the phasor diagram from the modified singlephase equivalent circuit. This method is also applied to evaluate the PWM and programmed do link modulation techniques for reducing the torque pulsations. The simplified calculations are compared with the exact digital solutions from machine D-Q equation. It is noted that the torque pulsations in induction motor driven by CSI are dependent upon the load condition unlike VSI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.477-478
• /
• 2007

This paper proposes a new concept of support vector machine (SVM) based voltage stability classifier using time-series phasor data. The classifier, based on a linear SVM, can provide very effective signals for identification of long-term voltage stability. In addition, the SVM output is applicable as an voltage stability indicator when an amount of corrective controls are performed just to make the system reach around at the maximum deliverable point.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.208-210
• /
• 1998

A high speed digital distance relaying algorithm based on a modified least square error method is proposed. To obtain stable phasor values very Quickly, first, a lowpass filter which has very short transient period and no overshoot is used. Secondly, the conventional least square error method is modified to the one having the data window of 3 samples by applying a FIR filter which removes the DC-offset component in current relaying signals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.62-64
• /
• 1995

This paper describes the characteristics of electromagnetic forces of Combined superconducting maglev system. Generation of the levitation, the propulsion and the guidance force by a single coil is proved by the phasor- analysis. It is also shown that double-layered configuration has better characteristics in efficiency, pulsation of the forces and drag ratio than single-layered configuration.