• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.4
• /
• pp.237-248
• /
• 2015

"Dynamic stabilization" systems have been developed in recent years to treat degenerative disorders of the spinal column. In contrast to arthrodesis (fusion), the aim here is to conserve intervertebral mobility to maximize comfort. When developing innovative concepts, many mechanical tests need to be carried out in order to validate the different technological solutions. The present study focuses on the B Dyn$^{(R)}$ "dynamic stabilization" device (S14$^{(R)}$ Implants, Pessac, France), the aim being to optimize the choice of polymer material used for one of the implant's components. The device allows mobility but also limit the range of movement. The stiffness of the ring remains a key design factor, which has to be optimized. Phase one consisted of static tests on the implant, as a result of which a polyurethane (PU) was selected, material no.2 of the five elastomers tested. In phase two, dynamic tests were carried out. The fatigue resistance of the B Dyn$^{(R)}$ system was tested over five million cycles with the properties of the polymer elements being measured using dynamic mechanical analysis (DMA) after every million cycles. This analysis demonstrated changes in stiffness and in the damping factor which guided the choice of elastomer for the B Dyn$^{(R)}$ implant.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.1
• /
• pp.16-24
• /
• 2005

Mathematical model was developed to verify a sequential particle removal taking place in a granular media gravity filter. Consequential multi-layer filtration cycle model was applied to verify the fraction of filter effluent particles that are filter influent particles that were never removed as well as the fraction of filter effluent particles that were detached after deposition were performed through laboratory experiments. Three sizes of marker particles were injected ahead of the filter column as a pulse in the presence of four sizes of polystyrene particles that were used as a primary source of particles in the raw suspension to investigate particle attachment alone in contrast to net removal from attachment and detachment. Microscopic counting of filter effluent particles was assumed to reflect attachment. Experimental results indicated that particle detachment is significant beginning from the early phase of filtration. For each size of fluorescent microspheres at one filter depth, fluorescent microsphere removal increased with filter runtime to a maximum due to ripening. The detached fraction of effluent particles increased with particle size and filter depth. The presence of detached particles and the increasing fraction of detached particles in deeper bed were confirmed.

• Journal of Yeungnam Medical Science
• /
• v.28 no.2
• /
• pp.165-172
• /
• 2011

Gastric glomus tumor is a rare mesenchymal tumor that originates from modified smooth muscle cells of the glomus body. Glomus tumors are commonly observed in peripheral soft tissue, such as dennis or subungal region, but rarely in the gastrointestinal tract. A 39-year-old woman was admitted due to epigastric soreness. Upper gastrointestinal endoscopy revealed a subepithelial mass measuring 3.5 cm with central ulceration at the lesser curvature-posterior wall of the antrum. Characteristically, contrast enhanced abdominal computed tomography scan demonstrated high enhancement of the submucosal mass up to the same level of the abdominal aorta in the arterial phase; this enhancement persisted to delayed phase. Due to the risk of bleeding and malignancy, wedge resection of the submucosal tumor was performed. Histologic findings were compatible with a glomus tumor.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.350-357
• /
• 2017

In this study, we used TIPS (thermally induced phase separation) for the application of water treatment membrane, and observed the change in morphology of separation membrane due to the change of solidification temperature and heat capacity. For manufactured membrane, PVDF and silica with excellent mechanical properties and chemical resistance were used, and DOP (dioctyl phthalate), DBP (dibutyl phthalate) were used as the diluent. Using the SEM (scanning electron microscope), the morphology of each different coagulation solutions of heat capacity change was observed. As the heat capacity increased, the crystallization rate of PVDF was decreased and showed large pore. In contrast, It also confirmed that the smaller heat capacity, the faster the crystallization rate and make smaller pores.

• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.537-541
• /
• 2005

Silicon nitride is one of the most successful engineering ceramics, owing to a favorable combination of properties, including high strength, high hardness, low thermal expansion coefficient, and high fracture toughness. However, the impact damage behavior of $Si_3N_4$ ceramics has not been widely characterized. In this study, sphere and explosive indentations were used to characterize the static and dynamic damage behavior of $Si_3N_4$ ceramics with different microstructures. Three grades of $Si_3N_4$ with different grain size and shape, fine-equiaxed, medium, and coarse-elongated, were prepared. In order to observe the subsurface damaged zone, a bonded-interface technique was adopted. Subsurface damage evolution of the specimens was then characterized extensively using optical and electron microscopy. It was found that the damage response depends strongly on the microstructure of the ceramics, particularly on the glassy grain boundary phase. In the case of static indentation, examination of subsurface damage revealed competition between brittle and ductile damage modes. In contrast to static indentation results, dynamic indentation induces a massive subsurface yield zone that contains severe micro-failures. In this study, it is suggested that the weak glassy grain boundary phase plays an important role in the resistance to dynamic fracture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1394-1397
• /
• 2006

Polymer Dispersed Liquid Crystal (PDLC) films, of which the liquid crystal has negative dielectric anisotropy, were prepared from the phase separation between MJ001317 and a variety of compositions of resins by common polymerization induced phase separation method. In this work, the effects of resin compositions have been systematically investigated and it was found that the morphology and size of droplet, which is closely related to electro-optic properties, mainly depend on the rate of polymerization and cross-linking density for each resin composition. The reverse mode PDLC films from this newly developed formulation containing TPGDA/EHA/HMPPO showed the good off-state transmittance, contrast ratio (19/1), and relatively low driving voltage(10V).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.160-164
• /
• 2015

In this study, $(1-x)Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3+xCeMnO_3$ (x= 0~0.02) ceramics were prepared by Columbite precursor method. The phase structure, ferroelectric and piezoelectric properties were systematically investigated. It was found that PMW-PNN-PZT possessed superior electrical properties due to its composition close to the MPB (morphotropic phase boundary). Coercive electric field of 10.05 [kV/cm] and density of 7.88 [$g/cm^3$] were obtained when the substitution amount of $CeMnO_3$ is x=0.02. In contrast, specimens with x=0.01 showed the mechanical quality factor($Q_m$) of 1,091 and the electromechanical coupling factor($k_p$) of 0.613.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.262-268
• /
• 2013

We study the focusing properties of a two-dimensional square-lattice photonic crystal (PC) comprising silica and germanium partitioned cylinders in air background. The finite difference time domain (FDTD) method with periodic boundary condition is utilized to calculate the dispersion band diagram and the FDTD method incorporating the perfectly matched layer boundary condition is employed to simulate the image formation. In contrast to the common square PCs in which the negative refraction effect occurs in the first photonic band without negative phase propagation, in our suggested model system, the frequency with negative refraction exists in the second band and in near-infrared region. In this case, the wave propagates with a negative phase velocity and the evanescent waves can be supported. We also discuss the dependency of the image resolution and its location on surface termination, source location, and slab thickness. According to the simulation results, spatial resolution of the proposed PC lens is below the radiation wavelength.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.79-84
• /
• 2006

We reviewed sex-change patterns in the wrasses Halichoeres poecilopterus, H. tenuispinis, Pteragogus flagellifer, and Pseudolabrus sieboldi inhabiting the coastal waters of Jeju, Korea, based on the sex distribution according to standard length and sex characteristics of the gonads. Halichoeres poecilopterus, H. tenuispinis, Pt. flagellifer, and Ps. sieboldi are protogynous hermaphroditic fish. Histological observations revealed that these wrasses are undelimited type 2 species because testicular tissue(spermatogenesis area) appears in most parts of the gonads during ovary of degenerative stage. Both initial- and terminal-phase males were present in the investigated populations, indicating that Halichoeres poecilopterus, H. tenuispinis, and Ps. sieboldi are of the diandric type. In contrast, Pt. flagellifer is considered a monandric type, because all males in the investigated populations were terminal-phase males produced via sex change from functional females.

• Korean Journal of Materials Research
• /
• v.26 no.1
• /
• pp.13-16
• /
• 2016

Morphology and formation processes of lamellar grain boundaries in titanium rich binary TiAl intermetallics were studied. TiAl alloys containing aluminum content of 44 to 48 at.% were induction-heated to 1723 K followed by helium-gas-quenching at various temperatures. For the Ti-44%Al, few lamellae were observed in samples quenched from higher than 1473 K. Although small peaks of beta phase were detected using X-ray diffraction, only the ordered hexagonal phase (${\alpha}_2$) with clear APB contrast was observed in TEM observation. For the Ti-48 at.%Al alloy, almost no lamellar structure, and straight grain boundaries were observed in samples quenched from higher than 1623 K. The formation of lamellae along grain boundaries was observed in the sample quenched from 1573 K. The fully lamellar microstructures with serrated boundaries were observed in samples quenched from lower than 1473 K. It was found that the formation of ${\gamma}$ platelets took place at higher temperatures in Ti-48 at.%Al than in Ti-44 at.%Al. Although the size of the serration is different, serrated lamellar grain boundaries could be obtained for all alloy compositions employed. The serration appeared to be due to the grain boundary migration induced by precipitation and growth of ${\gamma}$. Differences in transformation characteristics with aluminum content are discussed.