• Cross-Cultural Studies
• /
• v.42
• /
• pp.451-474
• /
• 2016

Analysis of the syntactic structure of the modern Chinese adverbs for time 'Cengjing (曾經)' and 'Yijing (已經)' was performed to examine the tenses and aspects of the terms. The corresponding Korean words were examined and the terms in both languages were compared. The syntactic structures used in China and South Korea were found to be different. We hope the study of the Chinese language will help Korean students. 'Cengjing (曾經)' specific projects with 'aspect' of, 'Past experience aspect', 'Past continuous aspect', 'Past continuous aspect' in the past tense. [ED: unclear, please reword] These correspond to '_었 (았)_', '_었었_' in the Korean language. 'Yijing (已經)' has 'finished phase' of concrete projects, 'Past experience aspect', 'Past continuous aspect', also has a specific project tense, the 'past tense', 'present tense', 'future tense', and so tense. [ED: unclear, please reword] Adjectives can also be modified with a 'change of status'. These correspond to '_었 (았)_', '_고_', '_었었_', '곧' etc. in Korean. 'Cengjing (曾經)' and the dynamic auxiliary 'Guo (過)' were compared to determine whether they have the aspect and tense features. However, 'Guo (過)' can only modify the predicate verb, so it possesses only aspect characteristics. 'Cengjing (曾經)' modifies the range more widely. 'Yijing (已經)' may be modified by the adverb 'Zai (在)' whereas 'Cengjing (曾經)' may not. Additionally, 'Yijing (已經)' can be modified by predicate adjectives and noun predicates, while 'Cengjing (曾經)' cannot.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1108-1119
• /
• 2018

As the interest on the air pollution is gradually rising at home and abroad, automotive and fuel researchers have been studied on the exhaust and greenhouse gas emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward two main issues : exhaust emissions (regulated and non-regulated emissions, PM particle matter) and greenhouse gases of vehicle. Exhaust emissions and greenhouse gases of automotive had many problem such as the cause of ambient pollution, health effects. In order to reduce these emissions, many countries are regulating new exhaust gas test modes. Worldwide harmonized light-duty vehicle test procedure (WLTP) for emission certification has been developed in WP.29 forum in UNECE since 2007. This test procedure was applied to domestic light duty diesel vehicles at the same time as Europe. The air pollutant emissions from light-duty vehicles are regulated by the weight per distance, which the driving cycles can affect the results. Exhaust emissions of vehicle varies substantially based on climate conditions, and driving habits. Extreme outside temperatures tend to increasing the emissions, because more fuel must be used to heat or cool the cabin. Also, high driving speeds increases the emissions because of the energy required to overcome increased drag. Compared with gradual vehicle acceleration, rapid vehicle acceleration increases the emissions. Additional devices (air-conditioner and heater) and road inclines also increases the emissions. In this study, three light-duty vehicles were tested with WLTP, NEDC, and FTP-75, which are used to regulate the emissions of light-duty vehicles, and how much emissions can be affected by different driving cycles. The emissions gas have not shown statistically meaningful difference. The maximum emission gas have been found in low speed phase of WLTP which is mainly caused by cooled engine conditions. The amount of emission gas in cooled engine condition is much different as test vehicles. It means different technical solution requires in this aspect to cope with WLTP driving cycle.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.57-63
• /
• 2017

This study investigated the effects of 27.12 MHz radio frequency (RF) heating on heat transfer phenomena during the thawing process of frozen food. To determine the velocity of the RF thawing machine, samples were frozen at $-80^{\circ}C$ and subjected to different power treatments. The phase change times (-5 to $0^{\circ}C$) of frozen radish were 30, 26, 13, and 8 min; those of pork sirloin were 38, 25, 11, and 5 min; those of rump were 23, 17, 11, and 6 min; those of chicken breast were 42, 29, 13, and 9 min; and those of tuna were 25, 23, 10, and 5 min at 50, 100, 200, and 400 W, respectively. The heating limit temperatures of the radish, pork sirloin, rump, chicken breast, and tuna samples were 19.5, 9.2, 21.8, 8.8, and $16.8^{\circ}C$ at 50 W; 23.5, 15.5, 27.3, 12.3, and $19^{\circ}C$ at 100 W; 42, 26.9, 45.7, 22.1, and $39.4^{\circ}C$ at 200 W; and 48.5, 54.7, 63.6, 57.3, and $44.9^{\circ}C$ at 400 W. These results suggest that high-power RF improves thawing velocity and heating limit temperatures, and that an improvement on the operation of the RF thawing machine, according to food temperatures, is needed.

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.223-230
• /
• 2019

The calcination of oyster shells have been studied as the possible substitute for the limestone used as an absorbent of $SO_2$ gas. However, since pure shells can not be used in calcination process, some impurities are contained and the changes in the characteristics of the calcination products are expected. In this study, the surface characteristics of the calcination products are investigated by mineralogical analysis according to the contents of NaCl, which can be derived from sea water, and sediments on the surface of the shell as impurities. The marine sediments on the shells were mainly composed of quartz, albite, calcite, small amounts of amphibole and clay minerals such as ilite, chlorite and smectite. After calcination of oyster shells mixed with 0.2-4.0 wt% sediments at $900^{\circ}C$ for 2 hours, regardless of the dehydration, dehydroxylation, and phase change of these minerals at the lower temperature than this experiment, no noticeable changes were observed on the specific surface area of the calcined product. However, when mixed with 0.1 to 2.0 wt% NaCl, the specific surface area generally increases as compared with the shell sample before calcination. The specific surface area increases with increasing amount of salt, and then decreases again. This is closely related to the changes of surface morphology. As the amount of NaCl increases, the morphology of the surface is similar to that of gel. It changes into a slightly angular, smaller particle and again looks like gel with increasing amount of NaCl. Our results show that NaCl affects morphological changes probably caused by melting of some oyster shells, but may have different effects on the specific surface area of calcination product depending on the NaCl contents.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.49-61
• /
• 2019

Swine manure has been recognized as a organic sources for composting and many research was conducted to efficiently utilize and treat. This study was to evaluate a feasibility for producing swine manure compost under various treatment with mixture of swine manure and saw dust. Treatments were designed as follows; non aerated composting pile(REF), aerated composting pile of $100L/m^3$(EXP1), and aerated composting pile of $150L/m^3$(EXP2). The total days of fermentation were 28 days and each samples were collected at every 7 days from starting of composting. Temperature sensors were installed under 30~40cm from the surface of composting pile. Inner temperature in composting piles of EXP1 and EXP2 was rapidly increased to $67{\sim}75^{\circ}C$ within 1~2 days. The elevated temperatures found during the thermophilic phase are essential for rapid degradation of organic materials. While swine manure composted, moisture content, total nitrogen, EC of EXP1, EXP2 in sample at 28 days were lower than those of REF. But, pH and organic matter of EXP1, EXP2 in sample at 28 days were higher than those of REF. After finishing fermentation experiment, maturity was evaluated with germination test. Calculated germination index(GI) at REF, EXP1 and EXP2 were 23.49, 68.50 and 51.81, respectively. The values of germination index were higher at EXP1 and EXP2 which is aerated composting piles than REF which is non aerated composting pile. According to the results, composting process by aerated static pile compost had significant effect on the reduction of required period for composting. Supplying adequate amount of air to compost swine manure will greatly reduce composting period.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.145-172
• /
• 2021

Shin Myung-soon's is based on the taboo 'bombing of the Han River Bridge'. The reality of the bombing of the Han River Bridge in 1950 and the shooting of Colonel Choi Chang-sik was known only as a word of mouth. At that time, the ruling class did not want to reveal the painful mistakes of the unfavorable war situation in the early days of the war and the false broadcasting of the president. The truth of the case, which was kept completely secret even to the bereaved family, could only be revealed after the regime change. After that, the bereaved family of Colonel Choi Chang-sik confirmed the innocence of the deceased through a request for retrial, and then the was born. However, the fate of was not so smooth. At the time, the performance officials vividly remember the difficulties they had with the text. Despite passing the pre-screening of the script, the performance was canceled just before the performance. The fact that the National Theater, officials from the Ministry of Culture and Education, and even military generals visited the practice room to stop the performance, on the contrary, was a testimony to the dangers of . It can be summarized as a crack in official history and a move to stop it. was later adapted into a special TV drama in 1981 and was first released to the public. This was a very meaningful step in terms of dealing with politically sensitive subjects on television, but the inconsistency of in the first place has largely disappeared. After that, in 1988, only after democracy entered the phase of appeasement, could be performed in its full form. In short, can be said to be an example of a process in which the history of the Korean War recorded from the standpoint of an established order and the counter-memory that crack it up are transformed according to the changes of the times and media.

• Journal of Korea Foundry Society
• /
• v.42 no.6
• /
• pp.337-346
• /
• 2022

In order to optimize the solution treatment conditions of Al-7Si-(0.3~0.5)Mg-(0~0.5)Cu alloys, a series of heat treatment experiments were conducted under various solution treatment times up to 7 hours at 545℃, followed by a microstructural analysis using optical microscopy, FE-SEM, and Brinell hardness measurements. Rapid coarsening of eutectic Si particles was observed in the alloys during the first 3 hours of solution treatment but the size of those Si particles did not change at longer solution treatment conditions. Meanwhile, the degree of spheroidisation of eutectic Si particles increased until the solution treatment time was increased up to 7 hours. Q-Al5Cu2Mg8Si6 andθ-Al2Cu were observed in as-cast Cu-containing Al alloys but the intermetallic compounds were dissolved completely after 3 hours of solution treatment at 545℃. Depending on the initial Mg composition of the Al alloys, π-Al8FeMg3Si either disappeared in the alloy with 0.3wt% of Mg content after 5 hours of solution treatment or remained in the alloy with 0.5wt% of Mg content after 7 hours of solution treatment time. Mg and Cu content in the primary-α phase of the Al alloys increased until the solution treatment time reached 5 hours, which was in accordance with the dissolution behavior of Mg or Cu-containing intermetallic compounds with respect to the solution treatment time. From the results of microstructural changes in the Al-7Si-Mg-Cu alloys during solution treatment, it was concluded that at least 5 hours of solution treatment at 545℃ is required to maximize the age hardening effect of the present Al alloys. The same optimal solution treatment conditions could also be derived from Brinell hardness values of the present Al-7Si-Mg-Cu alloys measured at different solution treatment conditions.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.42-49
• /
• 2023

The glass ceramic secondary resource containing Li-Al-Si is used in inductor, fireproof glass, and transparent cookware and accounts for 14% of the total consumption of Li, which is the second most widely used after Li-ion batteries. Therefore, new Li resources should be explored when the demand for Li is exploding, and extensive research on Li recovery is needed. Herein, we recovered Li from fireproof Li-Al-Si glass ceramic, which is a new secondary resource containing Li. The fireproof glass among all Li-Al-Si glass ceramics was used as raw material that contained 1.5% Li, 9.4% Al, and 28.9% Si. The process for recovering Li from the fireproof glass was divided into two parts: (1) calcium salt roasting and (2) water leaching. In calcium salt roasting, a sample of fireproof glass was crushed and ground below 325 mesh. The leaching efficiency was compared based on the presence or absence of heat treatment of the fireproof glass. Moreover, the leaching rates based on the input ratios of calcium salt, Li-Al-Si glass, and ceramics and the leaching process based on calcium salt roasting temperatures were compared. In water leaching, the leaching and recovery rates of Li based on different temperatures, times, solid-liquid ratios, and number of continuous leaching stages were compared. The results revealed that fireproof glass ceramics containing Li-Al-Si should be heat treated to change phase to beta-type spodumene. CaCO₃ salt should be added at a ratio of 6:1 with glass ceramics containing Li-Al-Si, and then leached 4 times or more to achieve a recovery efficiency of Li over 98% from a solution containing 200 mg/L of Li.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.603-614
• /
• 2008

End-uses of household water have been changed by a life style, housing type, weather, water rate and water supply facilities etc. and those variables can be considered as an internal and exogenous factors to estimate long-term demand forecasts. Analysis of influential factors on water consumption in households would give an explanation to cause on the change of trend and would help predicting the water demand of end-use in household. The purpose of this study is to analyze the demand trends and patterns of household water uses by metering and questionnaire such as occupation, revenue, numbers of family member, housing types, age, floor area and installation of water saving device, etc. The peak water uses were shown at Saturday among weekdays and July in a year based on the analysis results of water use pattern. A steep increase of total water volume can be found in the analysis of water demand trend according to temperature from $-14^{\circ}C$ to $0^{\circ}C$, while there are no significant variations in the phase of more than $0^{\circ}C$, with an almost stable demand. Washbowl water shows the highest and toilet water shows the lowest relation with temperature in correlation analysis results. In the results of ANOVA to find the significant difference in each unit water use by exogenous factors such as housing type, occupation, number of generation, residential area and income et al., difference was shown in bathtub water by housing type and shown in kitchen, toilet and miscellaneous water by numbers of resident. Especially, definite differences in components except washbowl and bathtub water, could be found by numbers of resident. Based on the result, average residents in a house should be carefully considered and the results can be applied as reference information, in decision making process for predicting water demand and establishing water conservation policy. It is expected that these can be used as design factors in planning stage for water and wastewater facilities.

• Asia Marketing Journal
• /
• v.15 no.1
• /
• pp.1-22
• /
• 2013

This case focuses on Shanghai Tang, the first truly Chinese luxury brand that appeals to both Westerners and, more recently, to Chinese consumers worldwide. A visionary and wealthy businessman Sir David Tang created this company from scratch in 1994 in Hong Kong. Its story, spanned over almost two decades, has been fascinating. It went from what best a Chinese brand could be in the eyes of Westerners who love the Chinese culture, to a nearly-bankrupted company in 1998, before being acquired by Richemont, the second largest luxury group in the world. Since then, its turnaround has been spectacular with a growing appeal among Chinese luxury consumers who represent the core segment of the luxury industry today. The main objective of this case study is to formally examine how Shanghai Tang overcame its downfall and re-emerged as one the very few well- known Chinese luxury brands. More specifically, this case highlights the ways with which Shanghai Tang made a transitional change from a brand for Westerners who love the Chinese culture, to a brand for both, Westerners who love the Chinese culture and Chinese who love luxury. A close examination reveals that Shanghai Tang has followed the brand identity concept that consists of two major components: functional and emotional. The functional component for developing a luxury brand concerns all product characteristics that will make a product 'luxurious' in the eyes of the consumer, such as premium quality of cachemire from Mongolia, Chinese silk, lacquer, finest leather, porcelain, and jade in the case of Shanghai Tang. The emotional component consists of non-functional symbolic meanings of a brand. The symbolic meaning marks the major difference between a premium and a luxury brand. In the case of Shanghai Tang, its symbolic meaning refers to the Chinese culture and the brand aims to represent the best of Chinese traditions and establish itself as "the ambassador of modern Chinese style". It touches the Chinese heritage and emotions. Shanghai Tang has reinvented the modern Chinese chic by drawing back to the stylish decadence of Shanghai in the 1930s, which was then called the "Paris of the East", and this is where the brand finds inspiration to create its own myth. Once the functional and emotional components assured, Shanghai Tang has gone through a four-stage development to become the first global Chinese luxury brand: introduction, deepening, expansion, and revitalization. Introduction: David Tang discovered a market gap and had a vision to launch the first Chinese luxury brand to the world. The key success drivers for the introduction and management of a Chinese luxury brand are a solid brand identity and, above all, a creative mind, an inspired person. This was David Tang then, and this is now Raphael Le Masne de Chermont, the current Executive Chairman. Shanghai Tang combines Chinese and Western elements, which it finds to be the most sustainable platform for drawing consumers. Deepening: A major objective of the next phase is to become recognized as a luxury brand and a fashion or design authority. For this purpose, Shanghai Tang has cooperated with other well-regarded luxury and lifestyle brands such as Puma and Swarovski. It also expanded its product lines from high-end custom-made garments to music CDs and restaurant. Expansion: After the opening of his first store in Hong Kong in 1994, David Tang went on to open his second store in New York City three years later. However this New York retail operation was a financial disaster. Barely nineteen months after the opening, the store was shut down and quietly relocated to a cheaper location of Madison Avenue. Despite this failure, Shanghai Tang products found numerous followers especially among Western tourists and became "souvenir-like" must-haves. However, despite its strong brand DNA, the brand did not generate enough repeated sales and over the years the company cumulated heavy debts and became unprofitable. Revitalizing: After its purchase by Richemont in 1998, Le Masne de Chermont was appointed to lead the company, reposition the brand and undertake some major strategic changes such as revising the "Shanghai Tang" designs to appeal not only to Westerners but also to Chinese consumers, and to open new stores around the world. Since then, Shanghai Tang has become synonymous to a modern Chinese luxury lifestyle brand.