• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.38-46
• /
• 2012

In this paper, the necessity for the identification of the absolute phase value is introduced and analyzed for a particular conductor line of a 3-phase type distribution network and the recent methods are also introduced. For the determination of the exact phase value for a specific point in the line, as compared with the phase reference point, the measured phase value must be within a range of ${\pm}60[^{\circ}]$. However, the phase of a particular point can fluctuate depending on the line constant, transformer wiring method, line length, line amperage, etc. A theoretical formulation such as Simulink modeling and analysis for a distribution network are conducted for the identification of phase at a specific point in the line. In particular, through evaluating the effects of unbalanced current loads at the time of determination of the phase value, the limitations of the present method for the determination of phases is described.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.72-78
• /
• 2009

We propose the separation algorithm to simultaneously measure two-dimensional refractive index distribution and thickness profile of transparent samples using three wavelengths. The optical system was based on the Mach-zehnder interferometer with LD (Laser Diode)-based multi-wavelength sources. A LCR (Liquid Crystal Retarder) was used to obtain interference images at four phase states and then the optical phase of the object is calculated by four-bucket algorithm. Experimental results with a glass rod are provided at the different wavelengths of 635nm, 660nm and 675nm. The refractive indices of the sample are distributed with accuracy of less than 0.0005 and the thickness profile of sample was cylindrical type. This result demonstrates that it is possible to separate refractive index distribution and thickness profile of samples in two dimensions using the proposed algorithm.

• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.179-184
• /
• 1995

Sodium superionic conductor (NASICON) compounds were prepared. The effects of sintering temperature and cooling rate on the formation and the distribution of crystalline NASICON and $ZrO_3$ second phase were investigated. In the von Alpen-type composition, the $ZrO_2$ second phase is in thermal equilibrium with the crystalline NASICON above $1320^{\circ}C$, but when cooled through 1260-$1320^{\circ}C$ crystalline NASICON was formed by reaction between $ZrO_2$ and liquid phase. Very slow cooling ($1^{\circ}C$/hr) to $1260^{\circ}C$ from sintering temperature decreased the amount of sodium which prevents the formation of the crystalline NASICON resulted high number of $ZrO_2$ grains near the surface of some sintered bodies. Maximum electrical conductivity of 0.200 ohm-1cm-1 was obtained at $300^{\circ}C$ for well-sintered samples with little $ZrO_3$. On the other hand, low conductivities were obtained for rapid-cooled samples which have less dense microstructure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.78-84
• /
• 1994

The location of periodic noises in phase of AC power wave reveals to be specific according to the noise kinds which can be generally classified into modulation and baseband types in DLC. The former noise type has constant noise phase which is originated from switching mode power supplies and the latter normally caused from thyristor circuit of low switching frequency is compared to be more dispersive than the other.

• Korean Journal of Veterinary Research
• /
• v.34 no.3
• /
• pp.537-547
• /
• 1994

Ninety seven cases of histopathologically diagnosed spontaneous canine parvovirus enteritis(CPE) were studied gross pathologically, histopathologically, immunohistochemically, to investigate histopathological types of small intestinal lesions, and antigen distributions in each pattern related to the infected age. And also, reliability of histopathological method in diagnosis of CPE was inspected with immunohistochemistry. The results were as follows : 1. Age-related occurring ratio in histopathologically diagnosed CPE was 53.6% in 4-8 weeks, 26.8% in 9-15 weeks, 8.25 in 16-19 weeks and 11.3% in 20-45 weeks of the clog age. 2. In histopathologic classification based on patterns of villi/crypts lesions of small intestine(jejunum), the ratio of A type (initial phase of necrosis of crypt epithelia, desquamated epithelial cells in the dilated lumen of the crypt) was 20.6%; the ratio of B type(middle phase of atrophy and fission of the villi, collapse of the mucosa, loss of normal crypt structure) was 62.9%, and C type(regenerative phase of the crypt architecture) was 16.5%. 3. The ratio of A, B, C type in 4-8 weeks old, respectively, was 23.5%, 61.5%, 15.4%; in 9-15 weeks old was 19.2%, 65.4%, 15.3% in 16-19 weeks old was 25.0%, 75.0%, 0.0%; and in 20-45 weeks old was 9.0%, 54.5%, 36.4%. 4. The antigen distribution in the nuclei of the crypt epithelial cells was higher than of the cytoplasm and numerous desquamated epithelial cells in dialated crypts in A type; The antigen cytoplasm and numerous desquamated epithelial cells in dialated crypts in A type; The antigen distribution in the nuclei of the collapsed crypt epithelial cells was not higher than that of the cytoplasm, crypts were lined by and filled with released viral antigens from the destructed epithelial cells in B type; and its distribution was also higher than in the epithelial cells adjacent to the tips of the villi, but it was not reacted in the regenerative crypt epithelial cells in C type. 5. Immunohistochemically detected antigen ratio in the small intestine of histopathologically diagnosed CPE was 94.6%, and this result indicates that histopathological diagnosis is very reliable method in diagnosis of CPE.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1529-1538
• /
• 1995

In this study, a liquid sheet type co-axial nozzle has been used to investigate the turbulent atomization characteristics which could result in the experimental data to be used in designing a jet nozzle with high performance. Image processing technique and immersion sampling method were employed to measure droplet size. In atomizing characteristics, droplet size distributions and absolute droplet sizes, SMD(Sauter Mean Diameter) have been investigated in the wide ranges of flow field depending upon the air-water mass ratios. And the comparisons between the present data and the semi-empirical curves have been conducted semi-empirical correlation for SMD has been derived in the present analysis.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.4
• /
• pp.341-348
• /
• 2005

This paper is concerned with the question of servicing warranties for repairable items. During the warranty period, each time an item fails the manufacturer has the obligation to restore the item to operational condition either by repairing the item or by replacing it with a new item. In this paper, we consider repair-replacement strategies based on the condition of the failed item. For products with phase-type lifetime distributions where the phases represent the condition of the item, we develop algorithms to determine the expected cost of servicing a warranty and use it in making the repair-replacement decision. Illustrative numerical examples are presented. We also propose a dynamic strategy by taking the expected remaining warranty cost into consideration.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.6
• /
• pp.316-321
• /
• 1999

Disk type single phase switched reluctance motor which is a simple robust construction, simple control circuit and low manufacturing cost, has a characteristics of axial and radial flux machines. However, because this DSPSRM has a complicated magnetic circuit, it is difficult to analyze the design characteristics.. In this study, the calculation of design parameter based on the conventional design theory of electric machine and the characteristics analysis by computer simulation was performed. As the DSPSRM has the characteristics of both AFM and RFM, it is difficult to analyze its characteristics by the 2D FEM. 3D FEM was applied in the analysis of energy distribution and approximated calculation of torque characteristics with rotor positions. With analysis results, prototype of DSPSRM is manufactured.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1855-1860
• /
• 2009

This paper caused a distribution utility to generation of analysis fault several cases on the ground of substation in a energy meter three phase current, voltage data measurement to fault type and characteristics. Mother wavelet transformation of suitable to method algorithm from the distribution utility to generation of fault in image impedance etc several parameter for utility characteristics effective to probatory fault point extraction.

• Journal of applied mathematics & informatics
• /
• v.35 no.5_6
• /
• pp.623-649
• /
• 2017

Retrial queues have been widely used to model the many practical situations arising from telephone systems, telecommunication networks and call centers. An approximation method for a simple Markovian retrial queue by reducing the two dimensional problem to one dimensional problem was presented by Fredericks and Reisner in 1979. The method seems to be a promising approach to approximate the retrial queues with complex structure, but the method has not been attracted a lot of attention for about thirty years. In this paper, we exposit the method in detail and show the usefulness of the method by presenting the recent results for approximating the retrial queues with complex structure such as multi-server retrial queues with phase type distribution of retrial time, impatient customers with general persistent function and/or multiclass customers, etc.