• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.309-313
• /
• 2001

본 논문에서는 Custom Power 응용을 위한 전압 안정화 특성을 갖는 다기능 3상 전자식 강압형 변압기가 제안된다. 제안된 전자식 변압기는 다음과 같은 특징을 갖는다. 1) 무게가 1㎾ 기준 일반 변압기의 40% 수준이다. 2) PWM 제어에 의하여 입력전압의 변동에 무관한 출력전압을 유지하는 전압 안정화 기능을 갖는다 3) 전원 또는 부하단의 Emergency에 대하여 회로 차단기의 기능도 갖는다. 4) 부하에 최초 전원 공급시, 낮은 전압으로부터 점진적으로 증가시켜가면서 전원을 인가하여, 전원 투입시 발생할 수 있는 돌입전류나 과도 충격을 제거할 수 있다. 그 밖에 무부하시 전원차단 기능과, 왜곡된 입력전압에 대한 보상기능을 추가 할 수 있다. 본 논문에서는 제안된 강압형 전자식 변압기의 회로 구성과 특징을 설명하고, 이를 PSPICE 시뮬레이션을 통하여 동작특성을 보인다.

• Membrane and Water Treatment
• /
• 제2권4호
• /
• pp.207-223
• /
• 2011

Supported Liquid Membranes (SLMs) have been widely studied as feasible alternative to traditional processes for separation and purification of various chemicals both from aqueous and organic matrices. This technique offers various advantages like active transport, possibility to use expensive extractants, high selectivity, low energy requirements and minimization of chemical additives. SLMs are not yet used at large scale in industrial applications, because of the low stability. In the present paper, after a brief overview of the state of the art of SLM technology the facilitated transport mechanisms of SLM based separation is described, also introducing the small and the big carrousel models, which are employed for transport modeling. The main operating parameters (selectivity, flux and permeability) are introduced. The problems related to system stabilization are also discussed, giving particular attention to the influence of membrane materials (solid membrane support and organic liquid membrane (LM) phase). Various approaches proposed in literature to enhance SLM stability are also reviewed. Modification of the solid membrane support, creating an additional layer on membrane surface, which acts as a barrier to LM phase loss, increases system stability, but the membrane permeability, and then the flux, decrease. Stagnant Sandwich Liquid Membrane (SSwLM), an implementation of the SLM system, results in both high flux and stability compared to SLM. Finally, possible large scale applications of SLMs are also reviewed, evidencing that if the LM separation process is opportunely carried out (no production of byproducts), it can be considered as a green process.

• 한국광학회지
• /
• 제16권4호
• /
• pp.313-318
• /
• 2005

순수 차동 위상 변조(NRZ_DPSK) 신호의 눈열림 특성을 이용하여 차동 위상 변조(DPSK) 기반 전송 시스템 수신단에 사용되는 1-비트 지연 마흐젠더 간섭계의 최적 동작점을 자동으로 검색하고, 운용 시 이를 유지하는 능동 안정화 제어 방법을 제안하였다. 이 방법은 추가 부품 없이 밸런스 수신기의 두 출력 DC 전압 차이를 비교하여 제어하므로 경제적이고 구성이 간단하며 입력 파워 의존성이 없다. 실험 결과, 전송율 $10\%$ 정도의 반송 광신호 주파수 변화에 대해서도 안정된 성능을 보였다.

• Applied Science and Convergence Technology
• /
• 제23권1호
• /
• pp.34-39
• /
• 2014

The programmable switches which control the delivery of electrical signals in programmable logic devices are fabricated using memory technology. Although phase change memory (PCM) technology is one of the most promising candidates for the manufacturing of the programmable switches, the threshold switching material should be added to a PCM cell for realization of the programmable switches based on PCM technology. In this work, we report the impurity-doped $Ge_2Sb_2Te_5$ (GST) chalcogenide alloy exhibiting threshold switching property. Unlike the GST thin film, the doped GST thin film prepared by the incorporation of In and P into GST is not crystallized even at the postannealing temperature higher than $200^{\circ}C$. This specific crystallization behavior in the doped GST thin film is attributed to the stabilization of the amorphous phase of GST by In and P doping.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.298-303
• /
• 2000

The 3 mol% yttria stabilized zirconia (3-Y PSZ) powder was heat treated at 50 0$^{\circ}C$ to evaporate the polymer binder and stabilize the tetragonal phase. The wear experiments were carried out on a ring-on-plate type reciprocating wear tester at selected temperatures with in the range room temperature to 600$^{\circ}C$ The results show that the heat treatment of powder decreases the wear rate due to the reduction of microcracks and pores in coatings and the stabilization of the tetragonal phase. Powder heat treatment enhanced the quality of the coating layer by removing remnant gases during coating process and the powder heat treatment at which tetragonal phase is stable diminished phase ratio of monoclinic. These two effects improved wear resistance characters.

• 한국광학회지
• /
• 제9권2호
• /
• pp.96-99
• /
• 1998

본 연구에서는 새로운 광피드백 장기 안정화법을 제안하고 실험적으로 그 가능성을 입증하였다. 제안한 방법은 광로장을 제어하는 방법으로써 지금까지와는 다른 고감도의 광피드백 위상 변별 기법을 도입하였다. 이는 외부 반사체로 사용한 공초점 패브리-페로 공진기의 반사모드의 편광 분광법에 의하여 위상 변별 신호를 얻어내는 것이다. 실험 결과 약 20시간 정도의 안정된 제어 상태를 유지하였다. 이 실험에서 사용한 광학계가 각각의 분리된 광학 요소를 광학 테이블에 배열한 불안정한 상태였으므로 광학계의 크기를 줄이고 각 광학적 요소를 하나의 판 위에 고정시킴으로서 일체화시킨다면 안정된 제어의 유지시간을 대폭 늘일 수 있을 것이다.

• 한국위성정보통신학회논문지
• /
• 제5권2호
• /
• pp.29-33
• /
• 2010

위성 산업은 상업적 군사적 유용성 등의 특성으로 인해 지속적인 발달이 이루어져 왔다. 이중에서도 위성의 전력 시스템은 위성의 수명에 직접적인 관련을 가지고 있으며, 실제 궤도상에서의 Test가 불가능한 특성을 보인다. 또한 저궤도 소형위성은 전력에 민감하므로, 효과적인 전력의 안정화 및 신뢰성 향상은 중요한 문제이다. 일반적으로 저궤도 위성의 전력은 각 부하의 특성에 따라 변환 및 제어가 이루어진다. 따라서 저궤도위성의 전력 시스템은 일반적으로 여러 단계의 전력 변환을 거치게 되므로, 신뢰성 향상을 위한 1차 및 2차 혹은 그 이상 단계의 Converter의 일반화 모델링 및 안정화를 위한 제어기 설계 및 외란에 의한 영향성의 분석이 요구된다. 본 논문에서는 저 궤도 위성 전력계 시스템의 전력 변환을 위한 Converter의 일반화 모델링을 통해 안정화 설계를 위한 파라미터를 추정하고 이를 통한 신뢰성 향상 및 최적 제어 방법에 대해 알아보기로 한다.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.41-50
• /
• 2014

The rising penetration of renewable energy resulted in the development of grid-connected large-scale power plants. Therefore, grid stabilization, which depends on the system-type or grid of each country, plays an important role and has been strengthened by different grid codes. With this background, VDE-AR-N 4105 for photovoltaic (PV) systems connected to the low-voltage grid and the German Association of Energy and Water Industries (BDEW) introduced the medium-voltage grid code for connecting power plants to the grid and they are the most stringent certifications. In this paper, an optimal control strategy scheme for three-phase grid-connected PV system is enhanced with VDE-AR-N 4105 and BDEW grid code, where both active/reactive powers are controlled. Simulation and experimental results of 100kW PV inverter are shown to verify the effectiveness of the proposed implemental control strategy.

• 한국분말재료학회지
• /
• 제13권5호
• /
• pp.360-365
• /
• 2006

The phase stability of tetragonal phase in Y-TZP was investigated in terms of the distribution of grain sizes and heat-treating atmosphere. Y-TZP with various grain sizes were prepared using duration time at $1600^{\circ}C$ as experimental parameter. Accumulated grain size distributions were built from the SEM micrographs and the amount of tetragonal phase were measured using XRD. Both results were compared to determine the critical grain size before and after heat-treatment in vacuum. The critical grain size drastically decreased compared with the small increase of average grain size due to the autocatalytic effect which critically affects the tetragonal to monoclinic phase transformation. After heat-treatment in reductive atmosphere critical grain size relatively increased due to the stabilization of tetragonal phase. The formation of oxygen vacancies during heat-treatment was ascribed to the increase of stability.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.186-191
• /
• 2004

The reactive flowfield of the transverse injecting combustor has been studied using Euler-Lagrange method in order to develop an efficient solution procedure for the understanding of liquid spray combustion in the transverse injecting combustor which has been widely used in ramjets and turbojet afterburners. The unsteady two-dimensional gas-phase equations have been represented in Eulerian coordinates and the liquid-phase equations have been formulated in Lagrangian coordinates. The gas-phase equations based on the conservation of mass, momentum, and energy have been supplemented by combustion. The vaporization model takes into account the transient effects associated with the droplet heating and the liquid-phase internal circulation. The droplet trajectories have been determined by the integration of the Lagrangian equation in the flow field obtained from the separate calculation without considering the iterative effect between liquid and gas phases. The reported droplet trajectories had been found to deviate from the initial conical path toward the flow direction in the very end of its lifetime when the droplet size had become small due to evaporation. The integration scheme has been based on the TEACH algorithm for gas-phase equation, the second order Runge-Kutta method for liquid-phase equations and the linear interpolation between the two coordinate systems. The calculation results has shown that the characteristics of the droplet penetration and recirculation have been strongly influenced by the interaction between gas and liquid phases in such a way that most of the vaporization process has been confined to the wake region of the injector, thereby improving the flame stabilization properties of the flowfield.