• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.350-350
• /
• 2019

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권5호
• /
• pp.41-46
• /
• 2003

Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has the advantage of being able to measure surface deformations of engineering components and materials in industrial areas without contact. The speckle patterns formed with interference and scattering phenomena can measure not only the out-of-plane but also the in-plane deformations. Digital image equipment processes the information included in the speckle patterns and displays the consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate, analyzed by 4-step phase shifting method, are close to the theoretical expectation. Similarly, out-of-plane displacements of a spot welded canti-levered plate were also measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded canti-levered plate is quite different from that of the canti-levered plate without spot welding.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.447-452
• /
• 2006

This paper presents a scheme to solve the congestion problem with phase-shifting transformer(PST) controls and power generation controls using linear programming method. A good design of PST and power generation control can improve total transfer capability(TTC) in interconnected systems. This paper deals with an application of optimization technique for TTC calculation. Linear programming method is used to maximize power flow of tie line subject to security constraints such as voltage magnitude and real power flow in interconnected systems. The results are compared with that of repeat power flow(RPF) and sequential quadratic programming(SQP). The proposed method is applied to 10 machines 39 buses model systems to show its effectiveness.

• 비파괴검사학회지
• /
• 제24권1호
• /
• pp.38-44
• /
• 2004

본 연구에서는 크레인 훅을 광탄성 재료의 일종인 '포토플렉스'를 이용, 2차원으로 모델링하여 힘을 가하였을 경우, 최대 압축 및 인장 응력이 발생되는 선상에서 광탄성실험법, 단순 곡선보 이론 및 유한요소법을 이용하여 응력을 측정하고 계산하였다. 특히, 광탄성 실험은 재래식 측정법에 의한 타디보간법, 프릭지 세선처리법 그리고 최근 개발된 4단계 위상이동법 등 세 가지 방법을 이용하였다. 광탄성 4단계 위상이동범은 주응력 방향, 즉 등경선이 일정한 선상에서는 연속적인 응력분포를 얻을 수 있는 장점이 있다. 크레인 훅에서 주응력 방향이 일정한 선상에 발생된 응력은 3가지 서로 다른 광탄성 실험법에 의해 측정된 길과가 잘 일치하였다 광탄성법에 의한 결과는 훅의 끝단 부근을 제외하고는 단순곡선보 이론이나 유한요소 해석결과와 대체적으로 비슷하였으나, 정확히 일치하지는 않았다. 이러한 차이는 크레인 훅의 실제 시편의 곡률등 형상과 하중조건이 단순곡선보 이론이나 유한요소 모델링 형상과 약간 다르기 때문에 나타난 것으로 추정된다. 광탄성실험법은 형상이 불규칙하고 하중조건이 복잡할 경우 실제 발생되는 응력을 전체적으로 정밀하게 측정할 수 있으므로 응력해석에 대한 이를 및 수치해석 법을 검증하는데 활용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1239-1242
• /
• 1998

In television stereo system, to produce a realistic sound effect is very difficult because the distance between stereo speakers is very narrow. Many signal processing methods of widening the sound image for spatial impression have been studied. One of the methods of widening the sound image is using the Precedence Effect by reflected sound. However, this method does not work effectively in lower frequencies because of directivity of a speaker. In this paper, we propose an effective method of expanding stereo image using Precedence Effect and Phase Shifting method to produce a whole band frequency sound expansion. In experiments, we confirm the usefulness of the proposed stereo sound image expansion system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1235-1238
• /
• 1998

In television stereo system, to produce the sound image for spatial impression is too difficult because of the narrow distence between two speakers. A method of widening the sound image using precedence effect was introduced but it didn't work effectively in low frequency band. In this paper, we propose a new method to produce an expanded sound image in full band of audio requency in band sound is expanded by phase shifting method and a higher frequency band sound is expanded by reflection. In simulation and experiment, the proposed system guarantees useful effect of sound image expansion in television stereo system.

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.103-114
• /
• 2020

A new optical asymmetric cryptosystem is proposed by modifying the asymmetric RSA public-key protocol required in a cryptosystem. The proposed asymmetric public-key algorithm can be optically implemented by combining a two-step quadrature phase-shifting digital holographic encryption method with the modified RSA public-key algorithm; then two pairs of public-private keys are used to encrypt and decrypt the plaintext. Public keys and ciphertexts are digital holograms that are Fourier-transform holograms, and are recorded on CCDs with 256-gray-level quantized intensities in the optical architecture. The plaintext can only be decrypted by the private keys, which are acquired by the corresponding asymmetric public-key-generation algorithm. Schematically, the proposed optical architecture has the advantage of producing a complicated, asymmetric public-key cryptosystem that can enhance security strength compared to the conventional electronic RSA public-key cryptosystem. Numerical simulations are carried out to demonstrate the validity and effectiveness of the proposed method, by evaluating decryption performance and analysis. The proposed method shows feasibility for application to an asymmetric public-key cryptosystem.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.58-63
• /
• 2007

This paper proposes a novel method of projecting a multiple stripe pattern whose intensity profile is sinusoidal. The sinusoidal stripe patterns are plated with chromium on a piece of glass, and the glass is placed within an optical projection system. By linearly moving the glass along the direction of the stripe pattern, the projection system generates the motion blurring effect, and as a result, produces a blurred stripe pattern whose intensity profile is sinusoidal along the perpendicular direction of the stripe pattern. The sinusoidal pattern improves the measurement accuracy of phase-shifting method. Experimental results are provided for three different types of stripe patterns: rectangle, diamond, and sinusoid.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.121-129
• /
• 1998

In-plane ESPI(Electronic Speckle Pattern Interferometry) was devised to measure in-plane deformations and rotation of a specimen with laser in this study. ESPI is a optical measuring method to be able to measure the deformations of engineering components and materials in industrial fields. The conventional measuring methods of surface deformations such as the strain gauge have many demerits because they are contact and point-to-point measuring ones. But that ESPI is noncontact, nondestructive and whole field measuring method can overcome previous disadvantages. We used ESPI which is sensitive to in-plane displacement for measuring in-plane deformations of a disk. And the 4-frame phase shifting method was used for the quantitative analysis. First of all, the system calibration was done due to an in-plane rotation before getting deformations of a disk. Finally we showed good agreement between the experiment results and those of the FEA(Finite Element Analysis).

• 비파괴검사학회지
• /
• 제25권3호
• /
• pp.171-177
• /
• 2005

Phase-shifting method using Fourier transform (PSM/FT) has been applied to measurement of in-plane displacement of a specimen. Thirty-two interference fringe patterns each of which has different phase of ${\pi}/16$ radian have been gathered from a specimen with in-plane displacement. Low-pass filtering by 2-D Fourier transform is used to suppress spatial noise of the fringe patterns. ${\alpha}-directional$ Fourier transform for PSM/FT is performed by use of the low-pass filtered 32 fringe patterns. Two kinds of specimens are used for experiment. One is a rectangular steel plate and the other one is a rectangular steel plate containing a circular hole at the center. In-plane displacement of each specimen is measured by PSM/FT, and calculated by finite element method (ANSYS) for comparison. The results are quite comparable, so that PSM/FT can be applied to measurement of in-plane displacement.