• Title/Summary/Keyword: phase map

Search Result 422, Processing Time 0.025 seconds

GIS based Water-pollutant Buffering Zone Management

  • Kim, Kye-Hyun;Yoon, Chun-Joo
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.506-506
    • /
    • 2002
  • S. Korean Government has accelerating its efforts to enhance the quality of the drinking water. The Ministry of Environment has declared the law of securing water-pollutant buffering zone to minimize the inflow of the point and nonpoint sources into the drinking water sources. As a first phase of installing nationa-wide water-pollutant buffering zone, approximately 300km buffering zone has been delineated along the South and North Han river, the major drinking water sources for the capital area of S. Korea, which has the population of more than 12 millions. The buffering zone has the width of 1,000 meter for the special protection area, and 500 meter for the remaining area from both ends of the river. The major works have been done in three stages. Firstly, the boundaries lines of the buffering zone was delineated on the digital topographic maps. Secondly, the maps were overlayed with the cadastral maps to identify individual land parcels, the street address of the major pollutant discharging facilities, and all different types of pollutants including livestocks. Thirdly, the field work has been done as a verification. Once the buffering zone was generated, all the information for the buffering gone were created or imported from other government agencies including official land price, details of the major manufacturing facilities discharging considerable amount of pollutants, major motels and resorts, not to mention of restaurants, etc. Also, major livestock houses were located to identify the path of the pollutant inflow to the drinking water source. Further works need to be continued such as purchasing private lands within the buffering zone and change the land use in the efforts to decrease the pollutant amount and to provide more environmentally friendly space. Also, high resolution satellite imagery should be utilized in the near future as a cost-effective data source to update all the landuse activities within buffering zone.

  • PDF

A Study on the Quality and Safety of Strawberries and Lettuce Using MA Packaging Container (MA포장용기를 이용한 딸기 및 상추의 품질 안전성에 관한 연구)

  • Hong, Sang-Tai
    • Journal of the Korea Safety Management & Science
    • /
    • v.22 no.4
    • /
    • pp.9-15
    • /
    • 2020
  • As of 2018, total yield of lettuce and strawberry amounted to 93,543 tons (representing 1.0 percent) and 183,639 tons (2.0 percent), respectively, among total yields worth 9,185,889 tons in South Korea. Lettuce is affected by a combination of numerous elements such as varieties, cultivation methods and pests during each growth phase (Lee et al., 1999). It is mainly cultivated in spring and fall. Especially due to respiration rate after harvest leading to reduced quality and poor storage, maintaining annual supply is unavailable (Jang et al., 2018). With the distribution of new varieties, forcing culture and indoor insulated facilities for plant cultivation during winter, strawberries are produced every year except for late summer and early fall. Due to active respiration, transpiration, soft flesh and high water content, the fruit is vulnerable to go bad and got rotten compared to other fruits. Furthermore, it is difficult to maintain freshness due to the possibility of softening, discoloration and fungi (Lee et al., 2012). In this regard, developing improved storage and package techniques is needed to ensure maintaining quality and safety even just two to three days after harvest. In order to ensure improved quality and safety of strawberries and lettuce after harvest, the present study applied a modified atmosphere packaging (MAP) technology (Mostofi et. al., 2008). Going forward, it compared the quality and safety of the two products while being stored in a way that put them in an MAP-applied container and a plastic container at room temperature and 4 degree Celsius.

Design of SW Framework for Airborne Radar Real-time Signal Processing using Modular Programming (모듈화를 활용한 항공기 레이다 실시간 신호처리 SW Framework 설계)

  • Jihyun, Lee;Changki, Lee;Taehee, Jeong
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.27 no.1
    • /
    • pp.76-86
    • /
    • 2023
  • Radars used by air-crafts have two important characteristics; First, they should have a real-time signal processing system finishing signal processing before deadline while getting and processing successive in-phase and quadrature data. Second, they can cover a lot of modes including A2A(Air to Air), A2G(Air to Gound), A2S(Air to Sea), and Ground Map(GM). So the structure of radar signal processing SWs in modern airborne radars are becoming more complicate. Also, the implementation of radar signal processing SW needs to reuse common code blocks between other modes for efficiency or change some of the code blocks into alternative algorithm blocks. These are the reason why the radar signal processing SW framework suggested in this paper is taking advantage of modular programming. This paper proposes an modular framework applicable on the airborne radar signal processing SW maintaining the real-time characteristic using the signal processing procedures for A2G/A2S as examples.

A Study on Deriving Process of a Design Alternative to the Forest Experience Center for Children through Preschooler Participatory (유아참여를 통한 유아숲체험원 설계안 도출과정에 관한 연구)

  • Kang, Tae-Sun
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.47 no.5
    • /
    • pp.1-13
    • /
    • 2019
  • This study is to derive a design alternative to the FECC (Forest Experience Center for Children) that meets the preschooler's preferences. For this purpose, preschooler participation is included in each phase of the FECC, the site perception phase, the deriving design elements phase, and the deriving design alternative phase. In this study, the process of the deriving design alternative phase was carried out with kindergarteners and preschoolers (6, 7 years olds; all 41 students) at Songsan-mulbit FECC in Gwangsan-gu, Gwangju. In order to derive the design alternatives, three detailed design processes (preschooler participation 2 times, researcher analysis 1 time), tool construction, and a preschooler participation workshop were conducted. The results of this study are as follows. First, as a result of the preschooler's design process, 41 designs were drawn, and an average of 7.66 spaces were drawn by each preschooler. The 6-year-old males designed the least (average 6.80 spaces) and the 7-year-old females designed the most (9.0 spaces). The physical and adventure play spaces were most common (38.9% to 48.7%) regardless of gender or age. To analyze the feasibility of the preschooler's design using a base map, the appearance of the physical environmental characteristics (7 items) in the site were analyzed in each of the 41 designs. As a result, the environmental characteristics were apparent a total 72 times overall. Similar environmental characteristics appearing more than once were apparent in 87.8% (26 designs) of designs. Second, three design alternatives were derived: APS- types (intensive planning of active play facility spaces) was presented in 15 designs, NS-types (planning focused on nature spaces) was presented in 14 designs, and SPS-types (planning focused on static play facility spaces) were presented 12 designs. Third, NS-type, which were finally selected through a preference assessment (5-point scale) and a comparative assessment of the three alternatives, has mainly natural spaces (forest space, forest path, shelter, natural exploration space, and ecological pond) and active play facility spaces, water play space and soil (sand) play spaces was appropriately designed. Therefore, the NS-type was analyzed as the design alternative that can fully accomplish all types of cognitive development through developed through play (functional play, constructive play, dramatic(symbolic) play).

International Cooperation Plan for DMZ World Peace Park: Focusing on NGO's international solidarity and support (DMZ 세계평화공원 조성을 위한 국제공조 방안: NGO의 국제연대 활동과 지원을 중심으로)

  • Suh, Kyung-Do
    • Journal of Digital Convergence
    • /
    • v.14 no.12
    • /
    • pp.645-655
    • /
    • 2016
  • The purpose of this study is to analyze the roles and functions of NGO 's International Solidarity in the establishment of' DMZ World Peace Park ', the mechanism of operation, and the policy formation of NGO' s international solidarity. The establishment of the DMZ World Peace Park is a matter that can be achieved as a result of dialogue efforts between the two parties based on the agreement between the DPRK and the ROK government, but should take a more relaxed approach to the process issues in order to achieve such results And should be done in a long-term, step-by-step plan. In the process of realizing this, South Korea's own efforts alone are difficult, and it is necessary to seek various channels of dialogue with the international community so that North Korea can have dialogue negotiations. This will be the role of NGO, It should be noted. As a result, in order to establish 'DMZ World Peace Park', it is necessary to establish concrete road map of DMZ World Peace Park. In the first stage, it is necessary to organize and operate 'DMZ World Peace Park Promotion Committee' under the directorship of the President or Prime Minister, It is necessary to select candidates, to appeal to North Korea and to support the international community, and to participate voluntarily by the private sector. Phase 2 requires final settlement. Phase 3 will require a step-by-step road map, such as rapid construction of the Peace Park, expansion of peaceful use of the DMZ, and expansion of ecology, history and cultural tourism in the DMZ border area.

Generation of Korean Ionospheric Total Electron Content Map Considering Differential Code Bias (Differential Code Bias를 고려한 한반도 전리층 총전자수 지도 생성)

  • Lee, Chang-Moon;Kim, Ji-Hye;Park, Kwan-Dong
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.29 no.3
    • /
    • pp.293-301
    • /
    • 2011
  • The ionospheric delay is the largest error source in GPS positioning after the SA effect has been turned off in May, 2000. In this study, we used 44 permanent GPS stations being operated by National Geographic Information Institute (NGII) to estimate Total Electron Content (TEC) based on pseudorange measurements phase-leveled by a linear combination with carrier phases. The Differential Code Bias (DCB) of GPS satellites and receivers was estimated and applied for an accurate estimation of the TEC. To validate our estimates of DCB, changes of TEC values after DCB application were investigated. As a result, the RMS error went down by about an order of magnitude; from 35~45 to 3~4 TECU. After the DCB correction, ionospheric TEC maps were produced at a spatial resolution of $1^{\circ}{\times}1^{\circ}$. To analyze the effect of the number of sites used for map generation on the accuracy of TEC values, we tried 10, 20, 30, and 44 stations and the RMS error was computed with the Global Ionosphere Map as the truth. While the RMS error was 5.3 TECU when 10 sites are used, the error reduced to 3.9 TECU for the case of 44 stations.

Uniform Posture Map Algorithm to Generate Natural Motion Transitions in Real-time (자연스러운 실시간 동작 전이 생성을 위한 균등 자세 지도 알고리즘)

  • Lee, Bum-Ro;Chung, Chin-Hyun
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.7 no.6
    • /
    • pp.549-558
    • /
    • 2001
  • It is important to reuse existing motion capture data for reduction of the animation producing cost as well as efficiency of producing process. Because its motion curve has no control point, however, it is difficult to modify the captured data interactively. The motion transition is a useful method to reuse the existing motion data. It generates a seamless intermediate motion with two short motion sequences. In this paper, Uniform Posture Map (UPM) algorithm is proposed to perform the motion transition. Since the UPM is organized through quantization of various postures with an unsupervised learning algorithm, it places the output neurons with similar posture in adjacent position. Using this property, an intermediate posture of two active postures is generated; the generating posture is used as a key-frame to make an interpolating motion. The UPM algorithm needs much less computational cost, in comparison with other motion transition algorithms. It provides a control parameter; an animator could control the motion simply by adjusting the parameter. These merits of the UPM make an animator to produce the animation interactively. The UPM algorithm prevents from generating an unreal posture in learning phase. It not only makes more realistic motion curves, but also contributes to making more natural motions. The motion transition algorithm proposed in this paper could be applied to the various fields such as real time 3D games, virtual reality applications, web 3D applications, and etc.

  • PDF

Generation of Ionospheric Delay in Time Comparison for a Specific GEO Satellite by Using Bernese Software

  • Jeong, Kwang Seob;Lee, Young Kyu;Yang, Sung Hoon;Hwang, Sang-wook;Kim, Sanhae;Song, Kyu-Ha;Lee, Wonjin;Ko, Jae Heon
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.6 no.3
    • /
    • pp.125-133
    • /
    • 2017
  • Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

Automatic Extraction of Initial Training Data Using National Land Cover Map and Unsupervised Classification and Updating Land Cover Map (국가토지피복도와 무감독분류를 이용한 초기 훈련자료 자동추출과 토지피복지도 갱신)

  • Soungki, Lee;Seok Keun, Choi;Sintaek, Noh;Noyeol, Lim;Juweon, Choi
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.33 no.4
    • /
    • pp.267-275
    • /
    • 2015
  • Those land cover maps have widely been used in various fields, such as environmental studies, military strategies as well as in decision-makings. This study proposes a method to extract training data, automatically and classify the cover using ingle satellite images and national land cover maps, provided by the Ministry of Environment. For this purpose, as the initial training data, those three were used; the unsupervised classification, the ISODATA, and the existing land cover maps. The class was classified and named automatically using the class information in the existing land cover maps to overcome the difficulty in selecting classification by each class and in naming class by the unsupervised classification; so as achieve difficulty in selecting the training data in supervised classification. The extracted initial training data were utilized as the training data of MLC for the land cover classification of target satellite images, which increase the accuracy of unsupervised classification. Finally, the land cover maps could be extracted from updated training data that has been applied by an iterative method. Also, in order to reduce salt and pepper occurring in the pixel classification method, the MRF was applied in each repeated phase to enhance the accuracy of classification. It was verified quantitatively and visually that the proposed method could effectively generate the land cover maps.

A study on speech enhancement using complex-valued spectrum employing Feature map Dependent attention gate (특징 맵 중요도 기반 어텐션을 적용한 복소 스펙트럼 기반 음성 향상에 관한 연구)

  • Jaehee Jung;Wooil Kim
    • The Journal of the Acoustical Society of Korea
    • /
    • v.42 no.6
    • /
    • pp.544-551
    • /
    • 2023
  • Speech enhancement used to improve the perceptual quality and intelligibility of noise speech has been studied as a method using a complex-valued spectrum that can improve both magnitude and phase in a method using a magnitude spectrum. In this paper, a study was conducted on how to apply attention mechanism to complex-valued spectrum-based speech enhancement systems to further improve the intelligibility and quality of noise speech. The attention is performed based on additive attention and allows the attention weight to be calculated in consideration of the complex-valued spectrum. In addition, the global average pooling was used to consider the importance of the feature map. Complex-valued spectrum-based speech enhancement was performed based on the Deep Complex U-Net (DCUNET) model, and additive attention was conducted based on the proposed method in the Attention U-Net model. The results of the experiments on noise speech in a living room environment showed that the proposed method is improved performance over the baseline model according to evaluation metrics such as Source to Distortion Ratio (SDR), Perceptual Evaluation of Speech Quality (PESQ), and Short Time Object Intelligence (STOI), and consistently improved performance across various background noise environments and low Signal-to-Noise Ratio (SNR) conditions. Through this, the proposed speech enhancement system demonstrated its effectiveness in improving the intelligibility and quality of noisy speech.