• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.92-103
• /
• 1997

The purpose of this study is to improve the wear resistance and hardness of Al alloy by making a formation of the thick surface hardening layers. The thick surface hardening layers were formed by PTAW(Plasma Transferred Arc Welding), with the addition of metal powders (Cu), ceramics powders (NbC, TiC), and mixture powders (Cu+NbC) in Al alloy (A1050, A5083). Mechanical properties of overlaid layers (wear resistance, hardness) were investigated in relation to the microstructure. The results obtained are summarized as follows: The depth of penetration was increased with increasing powder feeding rate. It is considered that these increase were due to the thermal pinch effect by the addition of powders, especially, for the Cu powders, were due to the heat of reaction with the matrix. The hardness and wear resistance of overlaid layers were improved with increasing powder feeding rate. For the Cu powders, it is considered that these increase were due to the increase of the formation of ${\theta}(CuAl_2)$ phase with increasing feeding rate of Cu powers.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.334-341
• /
• 2011

This paper presents accurate solutions for nonlinear transcendental equations of the selective harmonic elimination technique used in three-phase PWM inverters feeding the induction motor by particle swarm optimization (PSO). With the proposed approach, the required switching angles are computed efficiently to eliminate low order harmonics up to the $23^{rd}$ from the inverter voltage waveform, whereas the magnitude of the fundamental component is controlled to the desired value. A set of solutions and the evaluation of the proposed method are presented. The obtained results prove that the algorithm converges to a precise solution after several iterations. The salient contribution of the paper is the application of the particle swarm algorithm to attenuate successfully any undesired loworder harmonics from the inverter output voltage. The current paper demonstrates that the PSO is a promising approach to control the operation of a three-phase voltage source inverter with a selective harmonic elimination strategy to be applied in induction motor drives.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.6
• /
• pp.843-848
• /
• 2017

Objective: This experiment was conducted to evaluate the effects of a corn- or cassava- based diet on the production of meat-type ducks. Methods: Four hundred day-old ducks were used in this experiment. They were divided into five groups with each group replicated eight times. The ducks fed the corn-based diets served as the control group. The four other groups comprised different treatments, with each one given the cassava-based diet based on phase-feeding. Three treatments were fed the cassava-based diet from 16, 28, and 35 d; respectively up to 42 d of age and the other group was fed the cassava-based diet from 1 to 42 d of age. Results: The results indicated that ducks on either the corn- or cassava-based diets were similar in growth during 1 to 9 d of age. However, toward 35 to 42 d, the cassava-diet produced a higher weight gain (p<0.05). The cassava-based diet was better than the corn-based diet at increasing the outer and inner breast weights at 28, 35, or 42 d (p<0.05). In contrast, the corn-based diet was better at increasing abdominal fat (p<0.05). The two diets did not differ in their effects on the serum triglyceride, cholesterol, high-density lipoprotein-cholesterol, low-density lipoprotein-cholesterol, very-low-density lipoprotein-cholesterol, and liver cholesterol. The corn-based diet, however, caused a highly significantly greater level of liver triglyceride (p<0.01). Conclusion: The results of this study suggest that both the cassava- and corn- based diets are similar in their effect on meat-type ducks during the starter stage but toward the finisher stage, the cassava-based diet has a better influence on weight gain and carcass characteristics.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.257-264
• /
• 2016

In this paper, new electric railway feeding system which has active transformer is modeled for evaluating the steady state analysis using PSCAD/EMTDC. Equivalent models including power supply, feeder, train and transformers are proposed for simplifying the model of the feeding system in high speed electric railway. In case study, simulation results applied to proposed model are compared with the conventional and new systems through the catenary voltage, three-phase voltage of PCC (Point of Common Coupling) and the efficiency of regenerative braking energy.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.376-379
• /
• 2000

The methylotrophic yeast Pichia pastoris is one of the best host for the production of foreign proteins because of the presence of the strong AOX1 promoter induced by methanol. Methanol feeding induces the protein production and provides energy sources for the host cells. However, excess methanol inhibits the growth of host cells, while an insufficient methanol lead to poor growth and protein production. We have used various controled methanol feeding strategies to obtain the maximum proteins.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.74-76
• /
• 2009

A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.144-151
• /
• 2006

A rectangular loop antenna for S-band radar is proposed. The proposed loop antenna is the modified type of folded monopole antenna. The feeding line is coplanar stripline with $180^{\circ}$ phase difference for operating in odd mode. The proposed antenna showed return loss of -15.57dB at the center frequency and bandwidth of about 790MHz (> 25%) under the condition of VSWR < 2. The gains of single, 1x2, and 1x4 array loop antennas are 4.3, 7.0, and 10.2dBi, respectively.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.464-469
• /
• 1998

In the conventional wire feeder drives of welding machine, one thyristor or MOSFET device was used for half-wave phase control circuit and direct EMF measurement was used for sensing the wire feed rate. But the method using one switching device has poor response for sudden disturbance and it has latent speed ripple. It can affect some welding performance such as spatter generation and irregular bead formming. Therefore, the welding performance using full-bridge PWM speed control scheme was compared with conventional driving scheme was compared with conventional driving scheme and experimented in this paper. The results of experiment confirm the posibility of welding performance improvement by proposed constant speed control scheme in wire feeding drive of welding machine.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.4
• /
• pp.6-14
• /
• 1982

Both the power increasing of a television broadcasting channel for the purpose of minimiaing weak signal areas and depressing of radiation pattern to prevent some interference in known quadrants may be needed in TV broadcasting. This study shows that, the two needs mentioned above are solvable by adjusting the phases of feeding points, or redesigning the lengths of feeder lines between transmitter outend and feeder inputs in super gain antenna. A theoretical study on lengths of coaxial cables and a practical procedure of designing cable lengths, which is simple and inexpensive to apply, is presented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.7-14
• /
• 2003

Recently, LPG has been considered as more environmental friendly fuel than liquid fuels for vehicles. However because LPLi engine has the strong point that not only increases the volumetric efficiency and cold startability, but also decreases unburned hydrocarbon exhaust emission in warm-up condition, much attention has moved to development of the Liquid Phase LPG injection (LPLi) system from the mixer type LPG engine. To reduce exhaust NOx, this study investigated the effect of EGR with LPLi engine and determined optimized EGR feeding position and distribution. In addition, engine stability, performance, and exhaust emission level were evaluated.