• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.625-628
• /
• 2007

We present an efficient and robust technique to estimate the velocity of moving targets from a single SAR image. In SAR images, azimuth image shift is a well known phenomenon, which is observed in moving targets having slant-range velocity. Most methods estimated the velocity of moving targets from the distance difference between the road and moving targets or between ship and the ship wake. However, the methods could not be always applied to moving targets because it is difficult to find the road and the ship wake. We adopted a method estimating the velocity of moving targets from azimuth differentials of range-compressed image. This method is based on an assumption that Doppler center frequency shift of moving target causes a phase difference in azimuth differential values. The phase difference is linearly distorted by Doppler rate due to the geometry of SAR image. The linear distortion is eliminated from phase removal procedure, and the constant phase difference is estimated. Finally, range velocity estimates for moving targets are retrieved. This technique is tested using an ENVISAT ASAR image in which several unknown ships are presented. The theoretical accuracy of this technique is discussed by SAR simulation. The advantages and disadvantages of this method over the conventional method are also discussed.

• 한국전자파학회논문지
• /
• 제18권12호
• /
• pp.1345-1351
• /
• 2007

본 논문에서는 편파화 정도(Degree of Polarization: DoP)와 동일 편파 위상차(Co-polarized Phase-Difference: CPD)를 이용한 SAR 영상 분류법을 제안한다. 우선, 측정된 stokes 산란 operator로부터 DoP와 CPD를 얻는 계산식을 유도하고, SAR 영상 분류 과정을 설명한다. 다음에는 측정에서 얻은 완전 편파 L밴드 SAR 영상 데이터에 분류법을 적용하여 그 정확성을 검증하고, 예외 경우를 검토한다. 마지막으로 제안된 분류법으로 SAR 영상을 크게 4가지 그룹인 맨땅, 낮은 식물, 높은 식물, 주거 지역(마을)으로 분류한 결과를 보인다.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.608-615
• /
• 1999

본 논문에서는 초음파 모터의 위상차 구동원리에 관해서 명확히 하였고, 이를 이용하여 점·탄성 특성을 갖는 컴플라이언스 제어를 제시하였다. 제안된 컴플라이언스 제어는 인간의 근골격 시스템으로부터 유출하여 인간의 운동특성과 같이 매니퓰레이터의 관절 토크를 점성과 탄성계수의 조절에 의해 매니퓰레이터의 위치와 자세가 제어되도록 하였다. 초음파 모터의 위상차 구동원리에 대한 타당성을 모의실험을 통해 검증하였으며, 제시된 제어방법의 타당성을 검증하기 위하여 초음파모터를 이용하여 2축 수평형 직접구동 매니퓰레이터를 제작하여 점성과 탄성 특성에 대한 실험을 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.420-423
• /
• 2003

A low temperature difference model Stirling engine is a small Stirling engine running with several degree of temperature difference without power output. In this study, the design parameters to give maximum power are discussed. As results, the phase angle is about 100 degree, and compression ratio is 1.5% of the ratio of heat source temperatures at maximum power condition.

• Reproductive and Developmental Biology
• /
• 제37권3호
• /
• pp.149-154
• /
• 2013

The aim of this study was to evaluate the changes of protein patterns in granulosa cells and corpus luteum in ovaries during the estrus cycle in cows. The estrus cycle was devided into five steps of follicular, ovulatory, early-luteal, mid-luteal and late-luteal phases. In results, 61 spots of total 85 spots were repeated on follicular phase and 51 spots of total 114 spots were repeated on ovulatory phase. The 40 spots of total 129 spots were repeated on early-luteal phase and 49 spots of total 104 spots were repeated on mid-luteal phase. Also 41 spots of total 60 spots were repeated on late-luteal phase. On the other hands, the 16 spots were indicated difference in follicular phase and ovulation phase had a difference 10 spots. It was showed difference No. 103 spot in ovulation phase, No. 135 spot in early-luteal phase and No. 175 and 176 spots in mid-luteal phase. Also, the 11 spots were expressed specifically in mid-luteal phase and No. 178 and 179 spots were difference of expression in late-luteal phase. We confirmed that there were 7 spots for ovulation, 4 spots for luteinization and 2 spots for luteolysis. Spot No. 89~93 in ovulation phase were transferrin, and spot No.94~98 were HSP60. Spot No. 103 was Dusty PK, spot No. 135 was OGDC-E2, and spot No. 175 and 176 were Rab GDI beta from luteinization. Spot No. 178 and 179 in luteolysis were vimentin. This results suggest that will be help to basic data about infertility.

• 대한전자공학회논문지SD
• /
• 제38권1호
• /
• pp.37-43
• /
• 2001

본 논문에서는 컴퓨터와 리소그라피를 이용하여 암호화된 두 개의 위상카드를 제작하고, 마흐-젠더 간섭계를 이용하여 암호화된 이진영상을 복호화하는 방법을 제안하였다. 이때 두 위상카드 중 하나는 기준 영상으로 사용되고 다른 하나는 암호 영상으로 사용된다. 하나의 랜덤 위상 카드를 기준 영상으로 두고 암호화하고자 하는 영상에 맞게 빛의 간섭 현상을 이용하여 암호 영상으로 사용될 위상 카드를 제작하였다. 원 영상의 복원은 경로차가 같도록 구성한 마흐-젠더 간섭계의 두 경로에 기준 영상과 암호 영상을 위치시켜 간섭시킴으로써 영상을 복원할 수 있다. 위상 카드는 광세기 검출기로 볼 수 없을 뿐만 아니라 복제할 수도 없어서 개인 정보보호 및 인증시스템에 매우 유용하게 사용될 수 있다. 간단한 영상에 대한 광실험을 통하여 제안한 시스템의 타당성을 확인하였다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.25-42
• /
• 2005

The study was to investigate kinematic difference between flexed and extended type of knee during Jigeo-Cha-Gi in Taekwon-Do. For this subjects participated were consisted of weights of fin (1), bantam (1) and welter class(1) of male 3 national representative level skilled in two type(flexed and extended type) of Jigeo-Cha-Gi. 3D cinematography analysis was performed for motion analysis and Kwon 3D ver. 3.1) was used for 3D coordinates & analysis variables calculation. In Temporal variable there was no significant difference statistically in all phases & total elapsed time between flexed and extended type, but flexed type was delayed more 0.016 sec than extended type. In displacement of COG there was significant difference in level of p<.05 showing longer mean 6.13 cm in case of flexed type than extended type in displacement of COG during all phase and too significant difference in level of p<.01 showing longer mean 4.4 cm in case of flexed type than extended type in displacement of COG in follow through phase. In velocity of COG there was significant difference in level of p<.001 showing higher mean 15.53cm/s in case of flexed type than extended type in velocity of COG(Y direction) during targeting phase and peak velocity(Y) was more fast 8.74 cm/s in extended type than flexed type. In velocity of leading leg in forward direction(Y) there was significant difference in level of p<.05 showing higher thigh mean value in case of flexed type than extended type but showing higher foot mean value in extended type at level of p<.001 than flexed type in velocity of COG(Y direction). In velocity of leading leg in vertical direction(Z) there was no significant difference in the second & third phase in case of vertical velocity level, but momentum transferred efficiently form proximal to distal endpoint. In front-back & right-left orientation angle of trunk there was possibility of more stable Jigeo-Cha-Gi in extended than flexed type by decreasing in right-left orientation angle of trunk. In relative angle of lower leg(hip, knee, ankle) there was significant difference in level of p<.001 showing longer mean 32.74 deg. in case of flexed type than extended type in hip joint during the second phase but maintained insufficient extended knee of mean 168 deg. in targeting phase.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.142-155
• /
• 1992

본 연구에서는 실제 빙축열 시스템의 해석을 위한 기초 모델로서 수직원관 주 위의 응고과정에 대하여 밀도차와 자연대류 효과 및 최대 밀도점을 나타내는 밀도-온 도 관계식을 도입한 수치해석과 실험을 통하여 여러가지 매개변수들이 상변화에 미치 는 영향을 알아 보았다.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2006

Unsteady lift measurements were carried out in order to investigate the effects of phase difference and reduced frequency of a dragonfly-type model with two pairs of wing. A load-cell was employed to measure the lift generated by a plunging motion of the dragonfly-type model with the incidence angles of 0$^{circ}$. Experimental conditions are as follows: phase differences between fore- and hind-wings are 0$^{circ}$, 90$^{circ}$, 180$^{circ}$, and 270$^{circ}$, and reduced frequencies are 0.075, 0.15 and 0.225, respectively. The freestream velocity was 143 m/sec and corresponding chord Reynolds number was $3.4{\times}10^3$. The variation of phase-averaged lift coefficients during one cycle of the wing motion is presented. Results show that the total value of the positive lift coefficient during one cycle of the wing motion is the largest at the phase difference of 90$^{circ}$, and that the maximum lift coefficient and lift coefficient per unit of time increases with reduced frequency.

• 태양에너지
• /
• 제5권2호
• /
• pp.77-83
• /
• 1985

An analysis is performed to investigate the influence of the buoyancy force and the thickness variation of melting layer in the containment that is filled with phase-change Material surrounding a cylindrical heating tube during melting process. The phase-change material is assumed to be initially solid at its phase-change temperature and the remaining solid at any given time is still at the phase-change temperature and neglecting the effect of heat transfer occuring within the solid. At the start of melting process, the thickness of melting layer is assumed to be a stefan-problem and after the starting process, the change of temperature and velocity is calculated using a two dimensional finite difference method. The governing equations for velocity and temperature are solved by a finite difference method which used SIMPLE (Semi Implicit Method Pressure linked Equations) algorithm. Results are presented for a wide range of Granshof number and in accordance with the time increment and it is founded that two dimensional fluid flow occurred by natural convection decreases the velocity of melting process at the bottom of container. The larger the radius of heating tube, the higher heat transfer is occurred in the melting layer.