• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2900-2922
• /
• 2021

In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1004-1010
• /
• 2020

본 논문은 단상 영구자석 동기전동기의 초기 회전자 자극 검출 기법을 제안한다. 대상 전동기는 저속 및 정지 상태에서 역기전력을 기반으로 위치 정보를 얻을 수 없다. 따라서 초기 개루프 기동이 필요하며 이 과정에서 저 전류 및 소프트 기동을 위한 초기 회전자 위치 정보가 필요하다. 제안하는 초기 회전자 자극 검출 알고리즘의 경우 비대칭 공극의 영향 및 영구자석 자속의 영향을 고려하였으며, 고주파 전압 신호 주입을 기반으로 정확한 검출을 위한 오프셋 전압을 이용하였다. 이때 고주파 전압 신호로부터 유도된 고주파 전류의 경우 가상의 dq축을 이용하여 유도된 전류의 최댓값 취득을 통해 회전자 영구자석 자극을 판별한다. 본 논문에서는 센서리스 운전의 저전류 및 소프트 기동을 위해 제안된 초기 회전자 자극 검출 알고리즘을 홀센서 신호를 근거로 효용성 및 타당성을 다수의 실험을 통해 검증하였다.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.182-187
• /
• 2015

In the three-phase power system, when any one-phase or two-phases is open-phase, the unbalanced current flows and the single-phase power supplies to three-phase loads. Specially, motor coil and transformer coil receive over-current. As a result, great damage as well as electrical fire can occur to the power system. In order to improve these problems, this paper proposes that an open-phase detection device is designed by a new algorithm using electric potential difference between the resultant voltage of neutral point and ground, and a control circuit topology of open-phase protector is composed of highly efficient semiconductor devices. It improves response speed and reliability. The control algorithm circuit also operates the cut-off of a conventional residual current protective device (RCD) which flows an enforced leakage current to ground wire at open-phase accident. Furthermore, time delay circuit is added to prevent the incapable operation of open-phase protector about instantaneous open-phase not open-phase fault. The time delay circuit improves more reliability.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.114-120
• /
• 2008

In the vision-based recovery phase, a terminal guidance for the blended-wing UAV requires visual information of high accuracy. This paper presents the light source target design and detection algorithm for vision-based UAV recovery. We propose a recovery target design with red and green LEDs. This frame provides the relative position between the target and the UAV. The target detection algorithm includes HSV-based segmentation, morphology, and blob processing. These techniques are employed to give efficient detection results in day and night net recovery operations. The performance of the proposed target design and detection algorithm are evaluated through ground-based experiments.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.234-239
• /
• 2014

This paper proposes a new automatic detection method to inspect mura defects on display film surface using morphological image processing and labeling. This automatic detection method for mura defects on display films comprises 3 phases of preprocessing with morphological image processing, Gabor filtering, and labeling. Since distorted results could be obtained with the presence of non-uniform illumination, preprocessing step reduces illumination components using morphological image processing. In Gabor filtering, mura images are created with binary coded mura components using Gabor filters. Subsequently, labeling is a final phase of finding the mura defect area using the difference between large mura defects and values in the periphery. To evaluate the accuracy of the proposed detection method, detection rate was assessed by applying the method in 200 display film samples. As a result, the detection rate was high at about 95.5%. Moreover, the study was able to acquire reliable results using the Semu index for luminance mura in image quality inspection.

• The Journal of the Acoustical Society of Korea
• /
• 제26권1E호
• /
• pp.21-26
• /
• 2007

In this paper, we propose a modified Viterbi algorithm to compensate for endpoint detection error during the decoding phase of an isolated word recognition task. Since the conventional Viterbi algorithm explores only the search space whose boundaries are fixed to the endpoints of the segmented utterance by the endpoint detector, the recognition performance is highly dependent on the accuracy level of endpoint detection. Inaccurately segmented word boundaries lead directly to recognition error. In order to relax the degradation of recognition accuracy due to endpoint detection error, we describe an unconstrained search of word boundaries and present an algorithm to explore the search space with efficiency. The proposed algorithm was evaluated by performing a variety of simulated endpoint detection error cases on an isolated word recognition task. The proposed algorithm reduced the Word Error Rate (WER) considerably, from 84.4% to 10.6%, while consuming only a little more computation power.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.204-209
• /
• 2019

In an optical interferometer that uses sinusoidal modulation and quadrature detection, the amplitude and offset of the interference signal vary with time, even without considering system noise. As a result, the circular Lissajous figure becomes elliptical, with wide lines. We propose and experimentally demonstrate a method for compensating quadrature detection error, based on digital signal processing to deal with scaling and fitting. In scaling, fluctuations in the amplitudes of in-phase and quadrature signals are compensated, and the scaled signals are fitted to a Lissajous unit circle. To do so, we scale the average fluctuation, remove the offset, and fit the ellipse to a unit circle. Our measurements of a target moving with uniform velocity show that we reduce quadrature detection error from 5 to 2 nanometers.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.392-400
• /
• 2021

Unlike optical equipment, SAR(Synthetic Aperture Radar) has the advantage of obtaining images in all weather, and object detection in SAR images is an important issue. Generally, deep learning-based object detection was mainly performed in real-valued network using only amplitude of SAR image. Since the SAR image is complex data consist of amplitude and phase data, a complex-valued network is required. In this paper, a complex-valued ResNet network is proposed. SAR image object detection was performed by combining the ROI transformer detector specialized for aerial image detection and the proposed complex-valued ResNet. It was confirmed that higher accuracy was obtained in complex-valued network than in existing real-valued network.

• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.56-64
• /
• 2006

PM BLDC 전동기를 구동하려면 회전자 위치를 검출하는 센서가 필수적으로 요구된다. 그러나 주변 온도나 습도 등 작업 환경에 제한을 받는 곳에서는 센서의 고장 및 오동작으로 인한 전동기의 운전 정지 및 회전자 위치 검출오차에 의한 제어의 어려움이 발생할 수 있다. 따라서 3상 PM BLDC 전동기의 경우 3개의 센서를 이용하는 것이 일반적인 방법으로 사용되고 있지만 본 논문에서는 기존의 회전자 위치 검출 시 1개 또는 2개의 홀 센서만을 사용하여 기존의 방법과 동일한 성능을 가질 수 있는 알고리즘을 제안하였다. 그 결과 기존의 방법과 동일한 성능을 가지며 저가격, 보호회로 역할의 효과를 기대할 수 있다.

• 분석과학
• /
• 제14권5호
• /
• pp.392-399
• /
• 2001

생물시료에 존재하는 휘발성 유기화합물 중 n-butylbenzene과 1,2-dibromo-3-chloropropane (DBCP)를 기체크로마토그래피/질량분석기-선택이온검색법에 의해 수행하였다. 시료 중 휘발성 유기화합물은 $100{\mu}m$ polydimethyl siloxane (PDMS) fiber를 사용하여 headspace solid phase microextractio (SPME) 및 purge & trap 방법에 의해 추출 및 비교하였다. SPME에 의한 회수율은 n-butylbenzene의 경우 85.8%, DBCP의 경우 92.4%로 나타났고 검출한계는 각각 $0.15{\mu}g/kg$, $0.05{\mu}g/kg$로 나타났다. 반면, purge & trap의 경우 회수율은 n-butylbenzene의 경우 115.2%, DBCP의 경우는 80.9%로 나타났고 검출한계는 각각 $0.04{\mu}g/kg$ 및 $0.70{\mu}g/kg$로 나타나 두 방법에 있어 국내에서 규제하는 검출한계측면에서 큰 차이는 없었다.