• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.451-474
• /
• 2016

Analysis of the syntactic structure of the modern Chinese adverbs for time 'Cengjing (曾經)' and 'Yijing (已經)' was performed to examine the tenses and aspects of the terms. The corresponding Korean words were examined and the terms in both languages were compared. The syntactic structures used in China and South Korea were found to be different. We hope the study of the Chinese language will help Korean students. 'Cengjing (曾經)' specific projects with 'aspect' of, 'Past experience aspect', 'Past continuous aspect', 'Past continuous aspect' in the past tense. [ED: unclear, please reword] These correspond to '_었 (았)_', '_었었_' in the Korean language. 'Yijing (已經)' has 'finished phase' of concrete projects, 'Past experience aspect', 'Past continuous aspect', also has a specific project tense, the 'past tense', 'present tense', 'future tense', and so tense. [ED: unclear, please reword] Adjectives can also be modified with a 'change of status'. These correspond to '_었 (았)_', '_고_', '_었었_', '곧' etc. in Korean. 'Cengjing (曾經)' and the dynamic auxiliary 'Guo (過)' were compared to determine whether they have the aspect and tense features. However, 'Guo (過)' can only modify the predicate verb, so it possesses only aspect characteristics. 'Cengjing (曾經)' modifies the range more widely. 'Yijing (已經)' may be modified by the adverb 'Zai (在)' whereas 'Cengjing (曾經)' may not. Additionally, 'Yijing (已經)' can be modified by predicate adjectives and noun predicates, while 'Cengjing (曾經)' cannot.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.168-197
• /
• 2017

This paper considers two aspects of the wooden chamber tombs with stone mound that were constructed in Wolseong North Burial Ground, in Gyeongju: tomb form and the group tomb complex. The basic unit of a wooden chamber tomb with stone mound consisted of a single round mound, covered with an additional earthen layer and surrounded by a circle of protective stones, within which a single wooden chamber was located. The form of a wooden chamber tomb with stone mound could therefore 1) be round, consisting of a single tomb unit, 2) consist of two or more attached tomb units, 3) or consist of multiple attached chambers in a single mound. The single tomb contained the burial of a single individual, and the attached tomb contained two or more individuals who were blood relations or connected by marriage. Multiple attached chambers tombs usually consisted of wooden chamber burials of the lowest rank, and have only been identified in the royal burial area of Wolseong North Burial Ground. At the Jjoksaem Area of Wolseong North Burial Ground, which is currently, under investigation, tombs have been found in small clusters along the slightly raised ground. This is likely the result of small groups of kin relations, upon selecting points along the slightly raised ground as their burial area, having constructed midsized and large single tombs and attached tombs along the axis of the slightly raised ground, which were then surrounded by smaller 'satellite' tombs. It is through this process that the tomb complex of the different groups came to be formed. The tombs of the royal burial area of Wolseong North Burial Ground, including the Daereungwon Tomb Complex, also formed group tomb complexes. Forming the centers of the group tomb complexes of the royal tomb area were huge individual round tombs where the Maripgan rulers were laid to rest or a gourd-shaped dual mound tomb, which was the final resting place of the king and his queen consort. These central tombs were surrounded by large and smaller tombs. Of the individuals that were buried in the group tomb complexes, there would have been individuals that were of equal status or social position, such as husbands and wives or blood relations, but it is unlikely that all of the buried individuals were related by blood, given the significant difference in the sizes of the tombs. It is likely that the individuals buried in the lower ranked tombs included in the group tomb complexes were 'dependents' of the deceased of the central tomb and his or her direct family who maintained a subservient relationship. Such tomb forms and group tomb complexes that can be observed amongst the wooden chamber tombs with stone mounds of Wolseong North Burial Ground provide insights into the nature of the social groups of the Silla center during the Maripgan Period. It is hoped that future studies undertaking a more detailed analysis of the data may make further contributions to unveiling the various aspects of Silla society.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.97-104
• /
• 2019

This experiment was conducted to investigate the effect of whole crop rice (WCR) based TMR on growth performance and carcass characteristics of Hanwoo steers. WCR "Yeongwoo"was harvested at yellow ripen stage and ensiled for 60 days. The crude protein (CP), acid detergent fiber (ADF), neutral detergent fiber (NDF), in vitro dry matter digestibility (IVDMD) and total digestible nutrient (TDN) content was 8.4 %, 28.0 %, 53.8 %, 72.4 % and 66.8 %, respectively. For silage quality, pH was 4.37 and lactic and butyric acid content were 2.84 and 0.04 % in DM. Sixteen Hanwoo steers (8-mon-old) were allocated into either a control (commercial TMR) and WCR-TMR (WCR-based TMR) group. The TMR were fed according to the feeding stage phase: growing (Initiate~14 month), early fattening (15 month~21 month) and late fattening (22 month~30 month). The body weight of control group increased (P<0.05) until early fattening stage, but late growing stage of WCR-TMR group was higher than that of control (P<0.05). Average daily gain (ADG) was significantly greater (P<0.05) in WCR-TMR group (total 0.78 kg/head) compared to control (total 0.66 kg/head) except for late fattening stage. The marketing weight and carcass weight were higher in WCR-TMR group (726 vs 765 kg; 417.8 vs 450.4 kg). The back fat thickness (11.75 vs 13.00 mm), Longissimus dorsi area (88.00 vs $89.88cm^2$) and yield index (65.87 vs 64.30) were not different between the two groups (P>0.05) and also no difference in meat yield grade (A : B : C = 2 : 4 : 2). Marbling score (4.00 vs 4.13), meat color (4.75 vs 4.75), fat color (3.13 vs 2.88), texture (1.25 vs 1.50) and maturity (2.00 vs 2.00) were not significant difference between the two groups and meat quality grade ($1^{{+}{+}}:1^+:1:2:3=0:2:4:2:0$) was also not different. In conclusion, TMR feeding based on WCR silage showed superiority in carcass yield and ADG compared to control TMR. It is considered that the use of WCR for feed is a necessary option for the substitution of the imported forages and the government's policy for rice production adjustment.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1503-1517
• /
• 2018

Mt. Baekdu is a stratovolcano located at the border between China and North Korea and is known to have formed through its differentiation stage after the Oligocene epoch in the Cenozoic era. There has been a growing interest in the magma re-activity of Mt. Baekdu volcano since 2010. Several research projects have been conducted by government such as Korea Meteorological Administration and Korea Institute of Geoscience and Mineral Resources. Because, however, the Mt. Baekdu volcano is located far from South Korea, it is quite difficult to collect in-situ observations by terrestrial equipment. Remote sensing is a science to analyze and interpret information without direct physical contact with a target object. Various types of platform such as automobile, unmanned aerial vehicle, aircraft and satellite can be used for carrying a payload. In the past several decades, numerous volcanic studies have been conducted by remotely sensed observations using wide spectrum of wavelength channels in electromagnetic waves. In particular, radar remote sensing has been widely used for volcano monitoring in that microwave channel can gather surface's information without less limitation like day and night or weather condition. Radar interferometric technique which utilized phase information of radar signal enables to estimate surface displacement such as volcano, earthquake, ground subsidence or glacial movement, etc. In 2018, long-term research project for collaborative observation for Mt. Baekdu volcano between Korea and China were selected by Korea government. A volcanic specialized research center has been established by the selected project. The purpose of this paper is to introduce about remote sensing techniques for volcano monitoring and to review selected studies with remote sensing techniques to monitor Mt. Baekdu volcano. The acquisition status of the archived observations of six synthetic aperture radar satellites which are in orbit now was investigated for application of radar interferometry to monitor Mt. Baekdu volcano. We will conduct a time-series analysis using collected synthetic aperture radar images.

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.223-230
• /
• 2019

The calcination of oyster shells have been studied as the possible substitute for the limestone used as an absorbent of $SO_2$ gas. However, since pure shells can not be used in calcination process, some impurities are contained and the changes in the characteristics of the calcination products are expected. In this study, the surface characteristics of the calcination products are investigated by mineralogical analysis according to the contents of NaCl, which can be derived from sea water, and sediments on the surface of the shell as impurities. The marine sediments on the shells were mainly composed of quartz, albite, calcite, small amounts of amphibole and clay minerals such as ilite, chlorite and smectite. After calcination of oyster shells mixed with 0.2-4.0 wt% sediments at $900^{\circ}C$ for 2 hours, regardless of the dehydration, dehydroxylation, and phase change of these minerals at the lower temperature than this experiment, no noticeable changes were observed on the specific surface area of the calcined product. However, when mixed with 0.1 to 2.0 wt% NaCl, the specific surface area generally increases as compared with the shell sample before calcination. The specific surface area increases with increasing amount of salt, and then decreases again. This is closely related to the changes of surface morphology. As the amount of NaCl increases, the morphology of the surface is similar to that of gel. It changes into a slightly angular, smaller particle and again looks like gel with increasing amount of NaCl. Our results show that NaCl affects morphological changes probably caused by melting of some oyster shells, but may have different effects on the specific surface area of calcination product depending on the NaCl contents.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.170-187
• /
• 2020

Dolmens bearing the burial layout and stone coffin tombs of the late Bronze Age were excavated from Samdeok-ri, Goseong, Gyeonsangnsamdo, and grave items such as red-burnished pottery, arrowheads, and stone swords were also discovered. In the case of the red-burnished pottery that was found, it retains a pigment layer with a thickness of about 50 to 160㎛, but with most of the other items, exfoliation and peeling-off of pigment layers can be observed on the surface. The raw materials of the red-burnished pottery contained moderately sorted minerals such as quartz, feldspar, and hornblende, and partly opaque iron oxide minerals were also identified. In particular, the raw materials of the red-burnished pottery from stone coffin tomb #6 were different from those of the other pottery, containing large amounts of hornblende and feldspar. The pottery's red pigment was identified as hematite and showed similar mineral content of raw materials such as fine grained quartz, feldspar, and hornblende. The firing temperature is estimated to have been approximately 900℃, based on their mineral phase. The possibility exists that the raw materials had been collected from the Samdeok-ri area, because diorite and granite diorite with dominant feldspar and hornblende have been identified within 3km of that area. During the pottery manufacturing process, it is estimated that the pigment was painted on the entire surface of the red-burnished pottery after it had been molded and then finished using the abrasion technique. In other words, the red-burnished pottery was made by the process of vessel forming - semi drying - coloring - polishing. The surface and cross-section of the pottery appears differently depending on the concentration of the pigment and the coloring method used after vessels were formed. Most of the excavated pottery features a distinct boundary between pigment and body fabric. However, in the case of pottery in which fine-grained pigments penetrate the body fabric so that layers cannot be distinguished, there is the possibility that the fine-grained pigment layer was applied at a low concentration or immediately after vessel forming. Many cracks can be seen on the surface pigments in thickly painted pottery items, and in many cases, only a small portion of the pigment layers remain due to surface exfoliation and abrasion in the burial environment. It is reported that pottery items may be more easily damaged by abrasion if coated with pigment and polished, so it is believed that the red-burnished pottery of the Samdeok-ri site suffered from weathering in the burial environment. This damage was more extensive in the potsherds that were scattered outside the tomb.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.265-280
• /
• 2022

Hwangnyongsa Temple was the large Buddhist monastery of Silla that has existed for about 685 years. The temple underwent a series of excavations from 1976 to 1983, during which it was discovered that its layout consisted of one pagoda and three main dharma halls. This discovery also led to the production of four artistic depictions of the temple at various times from its foundation to its final phase. Previous studies on the architectural layout of Hwangnyongsa Temple are largely focused on the inner sanctuary ("Buddha's Land"). The studies on the temple's main architectural structures may be natural for those who are interested in the origins of and background to its establishment, but the studies on its outer sanctuary ("Sangha's Land") have to come first to acquire a deeper knowledge of the architectural layout of the temple as a whole. To gain a comprehensive understanding of the entire layout of Buddhist monasteries of the Silla dynasty, including both their inner and outer sanctuaries, the studies on Hwangnyongsa Temple are essential as it was once the kingdom's most highly honored temple. The studies on Korean Buddhist monasteries of the Three Kingdoms Period have produced only a limited amount of information concerning the outer sanctuary, resulting in little evidence about the exact scope of the temple's sanctuary. Meanwhile, the excavations of the Hwangnyongsa Temple site have revealed the archaeological features of the walls that divided the monastery and its neighboring facilities, thus helping to delineate the size of the temple site. The excavations have revealed the boundaries between the inner and outer sanctuaries of Hwangnyongsa Temple, as well as the entire temple precincts and the exterior, providing valuable information about the changes made to the layout of the temple. In this study, the main discussion focuses on the changes made to the sanctuary of Hwangnyongsa Temple during the Unified Silla and Goryeo Periods, particularly in relation to the architectural layout of the temple. The discussion is based on a review of the periods in which the Nammunji(South Gate site) was built, which provides tangible evidence about the expansion of the temple to the south, and the walls enclosing the temple precincts on the four sides and the changes that occurred afterwards. As a result, the study concludes that both the inner and outer sanctuaries of the temple probably changed through the 1 st and 3rd. It also concludes that the changes made to the architectural layout of Hwangnyongsa Temple were intended not only to alter the scope of the temple but were also closely associated with the politico-geographical significance of its location at the center of the royal capital of Silla and the urban archaeological remains around it.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.582-591
• /
• 2022

This study was conducted to eliminate Myocastor coypusMolina, 1782 (Nutria) from Jeju Special Self-Governing Province, South Korea. Habitat identification and eradication were carried out from September to November 2013, and a survey was carried out until June 2022 to check whether the eradication was successful. The habitat was identified with unmanned cameras, interviews, and literature surveys, and the capture was performed using the trapping method with food to attract nutria to the habitat area. The study area for the follow-up survey, which was set relatively wide considering nutria's home range, included wetlands and rivers within 4.0 km² of the habitat area (eradication area). As a result, nutria's habitat was confirmed only at Songdang Ranch, Songdang-ri, of Jeju Island, with traces of habitat (footprints, excrement, and burrows) confirmed in waterways and ponds within the pasture. Eight individuals were captured, including four females, three males, and one individual in too advanced a state of decay to identify the sex. The follow-up survey thoroughly investigated the habitat and its surroundings, focusing on three areas with permanent water, Seongeup Reservoir, Cheonmi Creek, and Molsuni Pond, but no signs of habitat were identified. Therefore, it is determined that nutria inhabiting Jeju Island has been completely eradicated. It is believed that the successful eradication of nutria in the Jeju Special Autonomous Region was possible due to a synergy between 1) the eradication of nutria at the beginning of the settlement phase through rapid capture after confirming the nutria habitat and 2) the delayed expansion period because of rare presence of wetlands, where water is constantly stagnant, on Jeju Island. These results imply that quickly identifying the ecological characteristics of the species and preventing disturbances before they or at the beginning of the ecological disturbance through control and eradication at the initial stage of settlement before the expansion stage is an effective measure to cope with the influx of alien species.