• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.169-174
• /
• 2010

A meta-analysis was conducted to summarize the results of studies which have described the profiles of hormones during the oestrous cycle in buffalo using a fixed effect model and a random effect model. Plasma progesterone concentrations were lowest (0.30${\pm}$0.06 ng/ml) during the peri-oestrous phase and increased (p = 0.067) through the early luteal phase to a maximum concentration (1.94${\pm}$0.03 ng/ml) during the mid-luteal phase. Circulating plasma inhibin and estradiol concentrations were lowest (0.31${\pm}$0.01 and 11.04${\pm}$0.13 ng/ml) during the mid-luteal phase, increased through the late luteal phase to maximum concentrations (0.44${\pm}$0.02 and 22.48${\pm}$0.32 ng/ml) during the peri-oestrous phase. Plasma FSH concentrations were lowest during the early luteal phase and increased through the mid-luteal phase to a maximum concentration during the peri-oestrous phase. Peripheral prolactin concentrations were lowest during the late luteal phase and increased to a maximum concentration during the peri-oestrous phase which then declined (p = 0.716) during the early luteal phase. Peripheral plasma cortisol concentrations decreased from 2.68${\pm}$0.14 ng/ml during the early luteal phase to 1.43${\pm}$0.27 ng/ml during the mid-luteal phase (p<0.001) which then increased to 2.06${\pm}$0.17 ng/ml during the late luteal phase. Plasma $T_{5}$ concentrations decreased from the late luteal phase to the peri-oestrous phase (p<0.001) which then increased during the early luteal phase. $T_{4}$ concentrations increased from the late luteal phase to the peri-oestrous phase which then decreased during the early luteal phase.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.365-368
• /
• 2004

The multi-phase flow analysis in a solid rocket motor is very important when performing the performance of a motor, and prediction of nozzle ablation. However, only in consideration of regular power, it has analyzed as power which a metal particle receives from a flow until now. We conduct analysis and an experiment about the virtual mass clause which will influence at the place where acceleration is big. We aim at the improvement in accuracy of multi-phase flow analysis from the result.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.162-169
• /
• 2014

The analysis and comparation of the half-coiled short-pitch windings with different phase belt are presented in the paper. The half-coiled short-pitch windings can supply the odd and even harmonics simultaneously, which can be applied in multiphase bearingless motor (MBLM). The space harmonic distribution of the half-coiled short-pitch windings with two kinds of phase belt is studied wi th respect to different coil pitch, and the suitable coil pitch can be selected from the analysis results to reduce the additional radial force and torque pulse. The two kinds of half-coiled short-pitch windings are applied to the five- and six-phase bearingless motor, and the comparation from the Finite Element Method (FEM) results shows that the winding with $2{\pi}/m$ phase belt is fit for the five phase bearingless motor and the winding with ${\pi}/m$ phase belt is suitable for the six phase bearingless motor. Finally, a five phase surface-mounted permanent magnet (PM) bearingless motor is built and the experimental results are presented to verify the validity and feasibility of the analysis. The results presented in this paper will give useful guidelines for design optimization of the MBLM.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.729-736
• /
• 2013

Power grids are large complicated networks in use around. An absolute phase value for a particular unknown-phase line at a local site should be identified for the operation and management of a 3-phase distribution network. The phase shift for a specific point in the line, as compared with a phase reference point at a substation, must be within a range of ${\pm}60^{\circ}$ for correct identification. However, the phase shift at a particular point can fluctuate depending on the line constants, transformer wiring method, line length, and line amperage, etc. Conducted in this study is a theoretical formulation for the determination of phase at a specific point in the line, Simulink modeling, and analysis for a distribution network. In particular, through evaluating the effects of unbalanced current loads, the limitations of the present phase identification methods are described.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.67-76
• /
• 1997

The seismic records of the main shock and two after shocks of the Yeongwol Earthquake are studied based on the phsase analysis. The travel time curves with 12 different possible phases are constructed to analysis the phases of the records. which were provided by KIGAM seismic network. The results of phase analysis show that 1) The main shock (Ms=4.5) shows clear Pn phase but two after shocks (Ms=4 and Ms=2.5) do not show Pn phase. 2) The Pg or PmP phases look as first arrival phase in the after shock records whose edicental distance is smaller or larger than 150 km. 3) It is very difficult to identity the phases related to the Conrad discontinuity even if the Conrad discontiuity arrival exists. 4) The record of GRE station located outside of the Kueongsan Basin shows different arrival time of Pn phase, P-S duration time and frequency compared with those of the other stations located within the Kyeongsan Basin.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.507-510
• /
• 2003

This paper presents a novel prototype of tile three-phase bridge power block module type a auxiliary resonant AC link snubber circuit, which is effectively used for the three-phase voltage source type sinewave soft switching PWM inverter using IGBTs. Its operating principle Is described for current source load model, along with its practical design approach based on the simulation data. The performance evaluation of the three-phase voltage source type snewave soft switching PWM inverter incorporating a single three-phase bridge mo여le of active auxiliary resonant AC link snubber treated here Is illustrated, which is concerned with power duality efficiency power loss analysis. This inverter is discussed as compared with those of tile three-phase voltage source type sinewave hard switching PWM inverter. The power loss analysis of this soft switching PWM Inverter using IGBT power modules is evaluated on the basis of the measured v-i characteristics and switching power losses of IGBT, and antiparaliel diodes. The practical effectiveness of this inverter is proven by the power loss analysis for distributed power supply.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.149-155
• /
• 2007

The counter emf(electromotive forces) of a permanent magnet multi-phase brushless motor is generally a non-sinusoidal wave or a non-ideal trapezoid. So, conventional modeling using a sinusoidal wave or an ideal trapezoid counter emf can result in errors. In order to reduce modeling errors for simulation and analysis the properties of a multi-phase brushless AC motor, this paper proposes a phase variable model that is a mixed modeling technique using both Finite Element Analysis(FEA) based circuits and motor voltage equations. The phase model parameters including the counter emf voltage waveform are obtained by using of FEA, and the mixed modeling technique based on circuits and equations is used to implement a simulation model for multi-phase brushless AC motors with any counter emf voltage waveforms. Adequacy of the proposed model is established from the simulation and experimental results for a seven-phase brushless motor.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.155-158
• /
• 2006

In the present paper, the scale effects of two-dimensional airfoil and three-dimensional wind turbine were investigated by using FLUENT software. For two dimensional analysis, flow around S809 airfoil with various Reynolds No. and Mach No. conditions were simulated. For three dimensional analysis, scaled NREL Phase VI wind turbine models from 6% to 1,600% were simulated under the same tip speed ratio condition. Finally, aerodynamic comparisons between two-dimensional flow and three dimensional wind turbine flow are made for the feasibility study of scale effect corrections. Currently, KARI(Korea Aerospace Research Institute) is preparing for the wind tunnel test of 12% NREL Phase VI wind turbine and the performance analysis of the scaled NREL wind turbine model will be validated by the wind tunnel test.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.11
• /
• pp.79-83
• /
• 2016

In this paper, we define four levels of analysis, design, implementation, and testing of the configuration of the development phase by S/W development life cycle. In particular, it dealt with the stage of the analysis phase to prepare an information system developed intensively. Details of the derivation of the information security requirements, it can be seen that comes from the perspective of confidentiality, integrity, availability and accountability, etc. It dealt with from the first manifestations of the projects planning to final planning to establish information security in activities of the Information Security requirements. As an example exhibited by assessing the information security analysis phase activities of S corporations, it can be seen that the improved sales rise in information security activities.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.1
• /
• pp.24-30
• /
• 2004

Analysis model for the two-phase catalytic reactor is presented. With the progress in development of micro thermofluidic devices, needs fur understanding of the phenomena in two phase reaction in cm scale has been arisen. To investigate thermal and reactive performance of down scaled two phase reactor simple analysis model that is a kind of lumped flow model is proposed. Analysis model presented is based on the experiment on mm scale model reactor. Target experiment is catalytic decomposition of 70wt％ hydrogen peroxide with existence of perovskite L $a_{0.8}$S $r_{0.2}$Co $O_3$ catalyst. It is composed of balance equations of mass and energy. Each phase is considered to be a species fur the simplicity. Axial diffusion and transversal distribution of properties are neglected. Two phase catalytic reaction is modeled as successive gasification of liquid lump around catalyst and reaction in gas phase. Heat transfer is modeled by model function ofNu number. Modeled Nu is expressed as Nu=N $u_{0}$ (1＋ $a_1$( $a_2$ $T^{-}$ $a_3$)exp( $a_4$ $T^{-1}$)exp( $a_{5}$ z). Transfer coefficients are determined by the comparison of experimental results. With the model, heat transfer characteristics are investigated. Also by the mass transfer coefficient, characteristics in mass transfer is investigated. With the result basic understanding on design and analysis of mm scale two-phase reactive device is obtained. Also it can be further applied to micro scale reactive device fabricated by micromachining.ing..