• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.93-98
• /
• 2012

The engine oil is an oil used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in Korea. In this case, it is possible to cause environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and four-ball test for fresh engine oil and used engine oil after vehicle driving (5000 km, 10000 km). The test result showed that the total acid number and wear scar by four-ball test of used engine oil had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000 km) had similar physical properties.

• Carbon letters
• /
• v.16 no.3
• /
• pp.171-182
• /
• 2015

Mesophase pitch is an important starting material for making a wide spectrum of industrial and advanced carbon products. It is produced by pyrolysis of petroleum residues. In this work, mesophase formation behavior in petroleum residues was studied to prepare environmentally-benign mesophase pitches, and the composition of petroleum residues and its influence on the mesophase formation was investigated. Two petroleum residues, i.e., clarified oil s (CLO-1, CLO-2) obtained from fluid catalytic cracking units of different Indian petroleum refineries, were taken as feed stocks. A third petroleum residue, aromatic extract (AE), was produced by extraction of one of the CLO-1 by using N-methyl pyrrolidone solvent. These petroleum residues were thermally treated at 380℃ to examine their mesophase formation behavior. Mesophase pitches produced as a result of thermal treatment were characterized physico-chemically, as well as by instrumental techniques such as Fourier-transform infrared spectroscopy, nuclear magnetic resonance, X-ray diffraction and thermogravimetry/derivative thermogravimetry. Thermal treatment of these petroleum residues led to formation of a liquid-crystalline phase (mesophase). The mesophase formation behavior in the petroleum residues was analyzed by optical microscopy. Mesophase pitch prepared from CLO-2 exhibited the highest mesophase content (53 vol%) as compared to other mesophase pitches prepared from CLO-1 and AE.

• Journal of Hydrogen and New Energy
• /
• v.31 no.2
• /
• pp.223-233
• /
• 2020

Fast pyrolysis is one of the most promising technologies for converting biomass to liquid fuels. Pyrolysis bio-oil can replace petroleum-based fuels used in various thermal conversion devices. However, pyrolysis bio-oil is completely different from petroleum fuels. Therefore, in order to successfully use pyrolysis bio-oil, it is necessary to understand the fuel characteristics of pyrolysis bio-oil. This paper focuses on fuel characteristics and upgrading methods of pyrolysis bio-oil and discusses how these fuel characteristics can be applied to the use of pyrolysis bio-oils. In addition, the fuel quality standards of fast pyrolysis bio-oil were examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.581-582
• /
• 2013

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.562-571
• /
• 2014

In these days, many countries carry out many renewable energy policies to increase the renewable energy portion and to reduce the GHG(Green House Gas). In Korea, RPS(Renewable Portfolio Standards) focused on over 500MW power producers is conducting. And they are using the bio-fuel oil to meet their RPS quota. The oil is a mixture of animal and vegetable fat or fatty acid ester of them and should satisfy some specifications to use the power generation such as viscosity, pour point, acid number. Depends on the raw materials, quality characteristics of power bio-fuel oil are changed. By adding the power bio-fuel oil, pour point, density, sulfur content and viscosity are decreased and acid number, iodine number, oxygen content are increased. In this study, we test the quality characteristic of power bio-fuel oil and the property changes by the blending ratio of power bio-fuel oil & conventional fuel oil.

• Journal of Hydrogen and New Energy
• /
• v.26 no.5
• /
• pp.484-492
• /
• 2015

As our government is actively introducing the RPS (Renewable Portfolio Standards) as a national renewable energy obligation policy, power producers are using the various renewable energy to meet the RPS supply quota since 2012. Recently, it is appling to use power bio-fuel oil in bio-fuel oil demonstration project with power companies. In general, power bio-fuel oils are composed of mixture products of vegetable oil, animal fat, fatty acid ester and waste oil. It is already developing for a power plant as a renewable energy abroad. In Korea, it is studying a 100% combustion and blended combustion of heavy fuel oil and bio-fuel oil. In this study, we investigated fuel characteristics of mixed power bio-fuel oil and its emission performance. Especially, it was reduced emissions of bio-oil in industrial boilers due to bio-fuel properties as compare with fuel oil.

• Geosystem Engineering
• /
• v.21 no.6
• /
• pp.335-343
• /
• 2018

Alkali-surfactant polymer flooding has become an important technique to improve oil recovery following the development of oil fields while the function of emulsification in enhanced oil recovery is rarely considered in the existing mathematical model for numerical simulation. In this paper, the mechanism of improving the recovery of the emulsification was analyzed in ASP flooding, and a relatively perfect mathematical model with deep filtration-theory was established, in which oil-water volume equation, saturation equation, viscosity equation, and permeability reduction equation are included. The new model is used to simulate the actual block of an oil field; the simulated results of the new model and an old model without considering the emulsification are compared with the actual well history. It is found that new model which is easy to be realized in numerical simulation has a high precision fitting, and the effect of adding oil and decreasing water is obvious. The sensitivity of emulsification was analyzed, and the results show that the water reducing funnel becomes wider and the rate of water cut decreases rapidly with the increase of emulsifying capacity, and then the rate of recovery slows down. The effect of increasing oil and decreasing water is better, and the degree of recovery increases. The emulsification of the ASP flooding is maintained at a moderate level, which corresponds to ${\Phi}=0.2$ in the new model, and the emulsification is applied to realize the general mathematical quantitative description, so as to better guide the oilfield development.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.453-465
• /
• 2014

The paper provides a review on bio-oil production technology from biomass by using fast pyrolysis to use heating fuel, power fuel and transport fuel. One of the most promising methods for a small scale conversion of biomass into liquid fuels is fast pyrolysis. In fast pyrolysis, bio-oil is produced by rapidly heating biomass to intermediate temperature ($450{\sim}600^{\circ}C$) in the absence of any external oxygen followed by rapid quenching of the resulting vapor. Bio-oil can be produced in weight yield maximum 75 wt% of the original dry biomass and bio-oils typically contain 60-75% of the initial energy of the biomass. In this study, it is described focusing on the characterization of feedstock, production principle of bio-oil, bio-oil's property and it's application sector.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1310-1311
• /
• 2003

Oil Field Geographical Information System (OFGIS) manages multiple spatial data, attribute data, and topographic data, which include almost every kind of ground info rmation and underground information. Subsystems managed by OFGIS include petroleum exploration subsystem (PESS), petroleum development and engineering subsystem (PDESS), petrochemical subsystem (PCSS), petroleum storage and transportation subsystem (PSTSS), petroleum sale subsystem (PSSS), etc. A basic OFGIS framework consists of oil field infrastructure coverage (OFIC), oil field specialized information coverage (OFSIC) and oil field synthesis and decision service coverage (OFSDSC). Basic function of OFGIS includes database management, geographic information management, spatial information processing and application.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.253-255
• /
• 2015

Crude oil is the world's most actively traded commodity and also one of the most significant resources in the world. The impact of oil price volatility has great influences on macroeconomic activities. This presentation is to review and analyze the oil price fluctuation and to examine the effects especially on the offshore oil production and thereafter to look over the challenges and opportunities in this sector focusing on the petroleum logistics.