• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.61-74
• /
• 2012

Industrial complexes in Korea have been vigorously established by economic development plan and development policy of industry in 1960s. Recently, Korean government has promoted Eco Industrial Park (EIP) project to recycle by-products and wastes in industrial park In this study, we analyzed the physical and chemical properties for the sludges discharged from A industrial complex. And we investigated the economic feasibility and environmental impact of sludge to energy facilities. The analysis results indicated that the petrochemical industry were 92% in sludge production, the highest treatment amount was landfill, followed by incineration and recycling and then ocean disposal. Wastewater sludge and process sludge samples are collected and analyzed to use as basic data on economic feasibility and environmental impact. Weighted average heating value of sludge samples was 3,891kcal/kg. Based on this data, installation and operation costs, operation returns of operating the drying facility are estimated, compared with cogeneration facility. And this study examines how the payback period of each simulation(total 8 case) with the important parameter changes. As a result, it was found that what needs the shortest payback period is 3years with connection of drying facility and cogeneration facility based on the government's financial subsidy system.

• Korea-Australia Rheology Journal
• /
• v.20 no.3
• /
• pp.175-184
• /
• 2008

Chemical engineering (ChE) was conceived at the close of the 19th century as a new discipline which was designed to support then the newly-emerging industries, oil and petrochemical, by supplying the competent engineers equipped with the pertinent engineering fundamentals and skills. It helped the said industries meet the various demands and ramifications of the new pattern of the human civilization spurred by the advent of automobile transportation at the turn of the 20th century. Now ChE once again is ready to fulfill its societal responsibility as probably the most important discipline and profession in sustaining the $21^{st}$ century human civilization providing the needed engineers (ChErs) and technologies. In this study, it is attempted to analyze the role of ChE and ChErs in this context, focusing on the macroeconomic connections embedded in the discipline that allow us to envision the big pictures of the 21st century civilization where the wellbeing of the mankind invariably hinges on five essential industries, i.e., medical, pharmaceutical, energy, environment and materials. It can be argued that ChE is the only discipline that can encompass simultaneously all those five industries indispensable to sustain the 21 st century human civilization that can be termed the era of "enjoy-healthy-living-longer". It is also believed that the historical mission ChE and ChErs are supposed to fulfill now is even bigger than that they took on a hundred years ago and subsequently accomplished with remarkable success in food, clothing, shelter and entertainment industries introducing various technological innovations. The macroeconomic viewpoints are called upon in this study as were in the 2006 article (Hyun, 2006) but focusing on ChE and ChErs this time to view the connections embedded in ChE as the essential components in understanding the historical nature of the role and responsibility of ChE and ChErs. The new paradigm for ChE is also pondered over together with the frequently-cited technology concepts such as IT, BT, NT, ET and ST which are regarded intimately germane to the characteristics and perspectives of the $21^{st}$ century civilization.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.37-37
• /
• 2009

Due to their high corrosion resistance and improved mechanical properties super-duplex stainless steel (SDSS) are extensively used in petrochemical plants such as facilities in modern oil platform and off-shore process equipment. It is well known that the best mechanical and corrosion resistance properties of super-duplex stainless steel are obtained with a microstructure having approximately equal amounts of austenite and ferrite. And it is also known that sigma($\sigma$), chi($\chi$), secondary austenite(${\gamma}2$), chromium carbides and nitride affected adversely their properties. Therefore these phases must be avoided. However, effects of succeeding weld thermal cycle on the change of microstructure of weldment at multi-pass weld were not seldom experimentally researched. Therefore in the present work, the change of weldmetal microstructure and the effect of microstructure on pitting corrosion property at $40^{\circ}C$ by succeeding each weld thermal cycle were researched. The thermal history of root side was measured experimentally and the change of microstructure of root weld according to thermal cycle of each weld layer was evaluated. And the relationship between microstructure of root weld and pitting corrosion property at $40^{\circ}C$ was also investigated. Results of the present work are show as below. 1. The ferrite contents of root weld are gradually reduced by succeeding weld thermal cycle. 2. The 2nd phases such as sigma($\sigma$), chi($\chi$), secondary austenite(${\gamma}2$), chromium carbides and nitride are increased gradually by succeeding weld thermal cycle. 3. The pitting corrosion was detected in root weld part and weight loss by pitting corrosion is increased in proportional to the time exposed over $600^{\circ}C$ of the root weld. 4. The succeeding weld thermal cycles affect the microstructure of the former weldments and promote the formation of 2nd phases. That is, the more succeeding welds are added, the more 2nd phases are gradually increased. Consequently, it is thougth that this adversely affects pitting corrosion property.

• Membrane Journal
• /
• v.25 no.3
• /
• pp.223-230
• /
• 2015

We synthesized novel polyimides with high gas permeability and selectivity for application of gas separation membrane. 2,2-bis(3,4-carboxylphenyl) hexafluoropropane dianhydride (6FDA) and two kinds of amines with high permeability and solubility were used to prepare the novel polymide. 2,4,6-Trimethyl-1,3-phenylenediamine (DAM) was used to improve gas permeability and 4,4-Methylenedianiline was used to improve the gas selectivity respectively. The polyimide copolymers were synthesized by commercial chemical imidization method using Triethylamine and Acetic anhydride and their average molecular weights were over 100,000 g/mol. The glass temperature (Tg) and the thermal degradation temperature were characterized using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The synthesized copolymers showed high Tg over $300^{\circ}C$ and high thermal degradation temperature over $500^{\circ}C$. The gas permeation properties were measured by time-lag equipment. Although general polyimides showed very low gas permeability, synthesized polyimide copolymer showed high $O_2$ permeability of 10.1 barrer with high $O_2/N_2$ selectivity around 5.3. From this result, we confirm that these membranes have possibility to apply to gas separation membrane.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.325-331
• /
• 2014

We synthesized novel polyimides with high gas permeability and selectivity for application of on board inert gas generation system (OBIGGS). 2,2-bis(3,4-carboxylphenyl) hexafluoropropane dianhydride (6FDA) and two kinds of amines with high permeability and solubility were used to prepare the novel polymide. 2,3,5,6-Tetramethyl-1,4-phenylenediamine (TMPD) was used to improve gas permeability and various kinds of diamines were used to improve the gas selectivity respectively. The polyimide copolymers were synthesized by commercial chemical imidization method and their average molecular weights were over 100,000g/mol. The glass temperature ($T_g$) and the thermal degradation temperature were characterized using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The synthesized copolymers showed high $T_g$ over $300^{\circ}C$ and high thermal degradation temperature over $500^{\circ}C$. The gas permeation properties were measured by time-lag equipment. Although general polyimides showed very low gas permeability, synthesized polyimide copolymer showed high $O_2$ permeability of 36.21 barrer with high $O_2/N_2$ selectivity around 4.1. From this result, we confirm that these membranes have possibility to apply to OBIGGS.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.313-319
• /
• 2004

The distribution and characteristics of acidotolerant heterotrophic and naphthalene-degrading bacteria were investigated in two forest areas, one near Ulsan petrochemical industrial complex (Sunam) and the other in countryside (Daeam). Average values of soil pH at Sunam and Daeam were 3.8 and 4.6, respectively. When het­erotrophic and naphthalene-degrading bacteria were enumerated by most probable number (MPN) procedures at Sunam, the median values of heterotrophs growing at pH 7.0 and pH 4.0 were $5.3{\times}10^7\;and\;3.3{times}10^7$ MPN/g, whereas those of naphthalene-degraders were $5.6{\times}10^4\;and\;4.0{times}10^5$ MPN/g, respectively. While the medians of heterotrophs at Daeam were larger than those at Sunam, the concentrations of naphthalene-degraders were higher at Sunam compared to those at Daeam. From the MPN tubes and enrichment cultures, we obtained 17 isolates of naphthalene-degraders which were identified as Sphingomonas paucimobilis, Brevundimonas vesic­ularis, Burkholderia cepacia, Ralstonia pickettii, Pseudomanas fluorescens, and Chryseomonas luteola. Among them, 6 isolates showed higher naphthalene-degrading activity on minimal media of pH 4 compared to pH 7, whereas the extent of growth was not greater at pH 4 than at pH 7 when they were inoculated on nutrient-rich media. It is plausible that the pH may affect naphthalene-degrading activity of the isolates by changing fatty acid composition of bacterial membrane.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.320-328
• /
• 2005

The most common five chlorophenols (4-chloro-3-methylphenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol, pentachlorophenol) were determined from the industrial wastewater by GC/MS. The samples were collected from the petrochemical company, textile company and leather making company. The developed analytical method was modified by USEPA Method 3510. The samples were extracted with dichloromethane under pH 2 and pH 5-6, and determined by the GC/MS with SIM mode. There were good linearities (above $R^2=0.9943$) on e ranges of the 0.1 ng/mL~10 ng/mL and 0.5 ng/mL~10 ng/mL, and the limit of detection were between 0.1 ng/mL and 0.5 ng/mL. The absolute recoveries were measured at the concentration of 1, 5, and 10 ng/mL, and the recovery was 71.6~98.9% except for PCP. The relative standard deviation (RSD) was 1.2~14.3% and it gave a good reproducibility for the assay. The bias, which shows the accuracy, was a good although it was a little high values (11.3~22.1%) at the low concentration (1 ng/mL).

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.1041-1051
• /
• 2003

Neutron induced prompt gamma activation analysis (PGAA) offers a nondestructive, sensitive and relatively rapid method for the determination of trace and major elements and is proven to be convenient for online analysis of minerals, metals, coal, cement, petrochemical, coating, paper as well as many other materials and products. The technique has found many uses in medicine, industry, research, security and the detection of contraband items. This report reviews the present status and future trends of the PGAA techniques. Requirements for the system are neutron source, high resolution HPGe detectors with a high-voltage power supply, an amplifier, analog-to-digital converter, and a multichannel analyzer for the detection and measurement of prompt ${\gamma}$-ray emit form the neutron capture elements. Introducing a ${\gamma}$-${\gamma}$ coincidence system also improves the quality of the ${\gamma}$-ray spectrum by suppressing the background created from the Compton scattering of high energy prompt ${\gamma}$-rays. A PGAA system using a $^{252}Cf$ neutron source is currently under construction for the on-line measurement of several elements in aqueous samples at KAERI. The system can be applied for the detection of chemical weapons and explosives as well as various narcotics.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.127-137
• /
• 1991

The dissociation and partial oxidation of $CH_3OH$ on polycrystalline $MoO_3$ powder catalyst were studied using thermal desorption spectrometry(TDS) under high vacuum condition. $CH_3OH$ was dissociatively adsorbed on $MoO_3$ in the forms of surface methoxy($-OCH_3$) and atomic hydrogen(-H). $CH_3OH$ desorbed at 425 K via the re-association of methoxy and adsorbed hydrogen atom, and HCHO desorbed at 545 K through the bond breakage of C-H in methoxy. Water TDS spectra showed two desorption peaks, that is, ${\alpha}$-peak at 428 K and ${\beta}$-peak at 586 K. It was suggested that ${\alpha}$-peak was due to the hydroxyl formed on $MoO_3$ surface during the dissociation of $CH_3OH$, and that ${\beta}$-peak was from the association of lattice oxygen and surface hydrogen atom formed by the bond breakage of C-H in methoxy. Pre-adsorbed oxygen on the surface of $MoO_3$ catalyst increased the amount of adsorption of $CH_3OH$ by promoting the dissociation of $CH_3OH$ on the surface, whereas pre-adsorbed water decreased the amount of adsorption of $CH_3OH$ by blocking of adsorption sites for $CH_3OH$.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.75-95
• /
• 2002

The Andong pluton in the Andong Batholith is composed of comagmatic plutonic rocks, in which the lithofacies comprise hornblende biotite tonalite in the central paft biotite granodiorite in the marginal paft and porphyritic biotite granite at the topside (noJthea~tern paft) of the pluton. The pluton is petrographically and petrochemically zoned, having more mafic center than margin and topside. Distribution pallern of the lithofacies represents a reverse zoning in the pluton. Modal and chemical data in the pluton show progressive and gradual compositional variations from the centrer via the margin to the topside. Quartz and K-teldspar increase toward the topside of the pluton, whereas hornblende, biotite and color index increase toward the center. The bulk composition in the pluton is also reversely zoned, with high $Si0_2$ and $K_{2}O$ in the topside facies, and high MnO, CaO, $Ti0_2$, $Fe_{2}O_{3}$t, MgO and $P_{2}O_{5}$ in the central facies. The reverse zoning is also evident in higher Cr. V, Ni, Sc and Sr of the more mafic tonalite in the interior. The reversely zoned pluton results from remobilization (resurgence) of the lower more mafic compositional zone into the upper more felsic zones of the pluton modified by thennogravitational diffusion and fractional crystallization. In the initial stages of evolution, the pluton was a petrochemical system that fonned chemical compositional zonation with mafic tonalitic magma in the lower. granodioritic one in the middle and granitic one in the upper paft of the magma chamber. Periodic influxes of more mafic magma from the ba~e resulted in mingling of liquids and redistribution of minerals, and may have triggered the remobilil.ation of the lower compositional zone into the upper more felsic zones.