• Korean Membrane Journal
• /
• v.2 no.1
• /
• pp.36-47
• /
• 2000

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.36-36
• /
• 1992

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.68-74
• /
• 2015

Superduplex stainless steels are important materials to the oil and gas industry, especially for off-shore production. TIG welding of super duplex stainless steels to obtain the optimal phase balance between austenite and ferrite is mainly achieved by controlling the cooling rate and the weld chemistry. The latter depends on the filler wire chosen and the shielding gas used. If TIG welding of superduplex stainless steels is performed with argon shielding gas only, then nitrogen gets lost from the weld pool, which can result in a ferrite-rich weld metal, with an inferior corrosion resistance than parent metal. In the present study, nitrogen permeation model from the shield gas which gets into the weld metal in DCEN-TIG welding has suggested. This plasma stream model shows characteristics of permeation of nitrogen ions into the molten metal due to the strong physical effect of plasma stream which formed by the arc pressure rather than the permeation of nitrogen ions caused by electric effect.

• Archives of Pharmacal Research
• /
• v.25 no.3
• /
• pp.392-399
• /
• 2002

The effects of vehicles and penetration enhancers on the in vitro permeation of melatonin through dorsal hairless mouse skin were investigated. Propylene glycol laurate (PGL), isopropyl myristate (IPM), propylene glycol monolaurate (PGML) and propylene glycol monocaprylate (PGMC) showed high permeation fluxes and PGL, PGML and PGMC decreased lag time significantly. In both of the binary co-solvents of diethylene glycol monoethyl ether (DGME)-PGL and DGME-IPM, the highest fluxes were achieved at 20% of DGME, which were $10.5{\pm}1.5$ and $9.1{\pm}2.4{\;}{\mu\textrm{g}}/cm^2/h$, respectively. Among fatty acids used as a permeation enhancer, capric acid and oleic acid in DGME-PGL (80:20 v/v) showed relatively high enhancing effects. Capric acid also shortened the lag time of melatonin from $2.4{\pm}0.7{\;}to{\;}1.3{\pm}0.2{\;}h$. Oleic acid, however, failed to shorten the lag time. Therefore, for effective solution formulations in terms of permeation flux and lag time, capric acid-containing DGME-PGL (80 : 20 v/v) could be used to enhance the skin permeation of melatonin.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.165-169
• /
• 1998

The effect of various vehicles on the permeation of a model drug, ketoprofen in solution formulation was evaluated using a flow-through diffusion cell system at $37^{\circ}C$. To investigate the mechanism of permeation rate enhancement, the effects of pretreatment with various vehicles on the permeation of the drug were evaluated using 5 mg/ml solution and saturated solution. The order of permeation rate of ketoprofen across hairless mouse skin after pretreatment with various vehicles was similar to the case where the vehicles and the drug were coadministered except ethanol and oleic acid. The results indicate that the mechanism of enhancement can be direct action of the vehicles on the barrier property of the skin and/or carrier mechanism.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.4
• /
• pp.313-319
• /
• 2002

Rat skin permeation of various nonsteroidal antiinflammatory drugs (NSAIDs) was investigated in vitro using Franz diffusion cell at $37^{\circ}C$. The effect of various skin permeation enhancers was also observed as a preliminary study of developing transdermal delivery systems of NSAIDs. Lipophilicity of NSAIDs was determined from thε partition coefficient (log P) in 1-octanol/water and 1-octanol/IPB mutual-saturated solutions. The solubility was determined in water, isotonic phosphate buffer (IPB), and propylene glycol (PG) at $37^{\circ}C$. The rat skin permeation rate of acetaminophen, piroxicam, and aceclofenac was almost negligible, although they were saturated in PG. Addition of 1 % permeation enhancer increased the permeation rate of ketoprofen, ketorolac, and diclofenac. However, the skin permeation rate of ibuprofen did not increase with the addition of various enhancers. Among the permeation enhancers testεd, oleic acid was the most effective for various NSAIDs. Based on the daily dose, lipophilicity, and the skin permeation ratε achieved in this study, ketoprofen and ketorolac seem to be the most promising drug candidates for transdermal delivery systems, especially when formulated with unsaturated fatty acids, such as oleic acid.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.181-184
• /
• 2001

The purpose of this study was to develop transdermal drug delivery system (TDDS) for the combination of physostigmine and procyclidine. The effects of various pressure sensitive adhesives (PSA) on the percutaneous absorption of procyclidine across hairless mouse skin were evaluated to select an appropriate PSA. In addition, the influences of various vehicles on the percutaneous absorption of procyclidine from PSA matrix across hairless mouse skin were evaluated using flow-through diffusion cell system at $37^{\circ}C$. Physostigmine did not have any influence on the permeation rate of procyclidine. The flux of procyclidine was the highest in silicone and PIB and was relatively lower in SIS, Acryl, and SBS adhesive matrices, however, their use was limited by the crystallization of the drug in the matrix. Among acrylic adhesives, the permeability of procyclidine was the highest from poly (ethylene oxide) grafted acrylic adhesive. Some enhancers show different enhancing effect depending on the drug, however, many of the tested enhancers showed enhancing effect for the permeation of both procyclidine and physostigmine to some extent. $Crovol^{\circledR}$ EP 40 showed the highest enhancing effect on the permeation of both compounds. The size of TDDS to provide required permeation rate was estimated to be $35\;cm^2$ based on available information.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.212-217
• /
• 2003

The memory effect of silver and aqua regia in the vessel by their permeation was studied during the microwave digestion of samples under the operating conditions of high temperature and pressure. The extent of permeation in vessels with the solution containing silver 5 mg has been shown to be $0.97{\mu}g/mL$ for the digestion of $HNO_3$ solution and $0.47{\mu}g/mL$ for the digestion of oil sample under condition of MDS 180T program ($180^{\circ}C$, 220 psi).

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.173-177
• /
• 2007

The purpose of this study was to investigate the effect of salt formation on the percutaneous absorption of meloxicam through hairless mouse skin from a pressure sensitive adhesive (PSA) matrix. In addition, the influences of enhancers on the permeation of meloxicam or meloxicam-ethanolamine (MX-EA) salts across the hairless mouse skin were evaluated using a flow-through diffusion cell system. The salt formation of meloxicam resulted in lower permeation rate than the parent drug. $Span^{(R)}$ 80 provided the highest enhancing effect for meloxicam and meloxicam monoethanolamine salt. The maximum amount of the drug that can be loaded without retarding permeation rate was different depending on the compound. No relationship was found between the fluxes of meloxicam or MX-EA salts from saturated solutions and those from PSA matrices containing the same enhancer.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.234.1-234.1
• /
• 2003

The effects of vehicles and penetration enhancers on the in vitro permeation of ketorolac tromethamine (KT) across excised hairless mouse skins were investigated. Among pure vehicles examined, propylene glycol monolaurate (PGML) showed the highest permeation flux, which was 94.3${\pm}$17.3 mg/cm$^2$/hr. Even though propylene glycol monocaprylate (PGMC) alone did not show high permeation rate, the skin permeability of DT was markedly increased by the addition of diethylene glycol monoethyl ether (DGME); the enhancement factors were 19.0 and 17.1 at 20 and 40% of DGME, respectively. (omitted)