• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.423-428
• /
• 2002

Due to various advantages over the conventional linear motion device such as ball-screw, linear motors have been used in wide variety of industrial applications for years. Driven by increased demand for precision machine tools, the importance of high positioning accuracy, high stiffness and high thrust are greatly increasing. The merits of linear motor are high speed, high acceleration and good positioning accurcy. In addition, Linear motor for high quality machine tool call for high thrust, high stiffness. In this paper, thrust ripple, detent force and thermal behavior are considered for the development of high performance linear motor whose thrust is up to 4,000N. This paper presents a comprehensive study for an iron core type linear motor characteristics that include the influence of PM position on thrust, thrust ripple by detent force and motor dynamics as well.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1795-1800
• /
• 2000

One of the principal sources of vibration and noise in permanent magnetic machines is cogging torque, which is induced by interaction between the rotor poles and the stator teeth. For its analysis, using finite element analysis is very time consuming and the calculation of performance factors is extremely sensitive to the discretization. Especially, Maxwell stress tensor method is sensitive to the location of integral path. In this paper, a cogging permeance fuction is defined and replaced by the straight line. And it is assumed that the flux density acting on the stator's tooth side is the euqal to the flux density of the slot area. Using this definition and assumption, analytical calculation of cogging torque is presented and validated. And several reduction method is introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.22-24
• /
• 2005

This paper is intended to introduce a set of static and dynamic experiments for a better characterization of the linear permanent magnet oscillatory machine. The experiment have been peformed on two prototypes; one with buried permanent magnets with flux concentration while the other with surface permanent magnets. Though the testing arrangement allows for it, temperature, noise and vibration have not been in this paper.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1945-1955
• /
• 2018

High frequency signal injection (HFI) is an alternative method for estimating rotor position of interior permanent magnet synchronous motor (IPMSM). The general method of frequency and amplitude selection is based on error tolerance and experiments, and is usually set with only one group of HF parameters, which is not efficient for different working modes. This paper proposes a novel rotor position estimation scheme by HFI with optimized frequency and amplitude, based on the mathematic model of IPMSM. The requirements for standstill and low-speed operational modes are met by applying this novel scheme. Additionally, the effects of the frequency and amplitude of the injected HF signal on the position estimation results under different operating conditions are analyzed. Furthermore, an optimization method for HF parameter selection is proposed to make the estimation process more efficient under different working conditions according to error tolerance. The effectiveness of the propose scheme is verified by the experiments on an IPMSM motor prototype.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.543-551
• /
• 2019

영구자석 동기 전동기는 출력 밀도가 높고 효율이 높다는 장점 때문에 적용 범위가 넓어지고 있다. 자동차나 로봇과 같은 고전력밀도, 고성능 전동기 구동 시스템뿐만 아니라 세탁기, 에어컨, 냉장고와 같은 비용 절감이 매우 중요한 시스템에도 영구자석 동기 전동기가 사용되고 있다. 비용 절감을 위해 회전자 위치 센서를 제거하는 센서리스 제어가 필요한데, 일반적으로 센서리스 제어는 전동기를 기동하는 조건에서는 사용하기 어렵다. 따라서 초기 기동에서는 전류 벡터를 임의의 속도로 회전시키는 I-F 속도 제어를 사용하고, 특정 속도 이상이 되면 센서리스 속도 제어로 절환해야 한다. I-F 속도 제어와 센서리스 속도 제어에서의 속도 제어 성능도 중요하지만 두 제어 기법이 절환되는 과도 상태에서도 속도 제어 성능을 유지해야 한다. 본 논문에서는 영구자석 동기 전동기의 센서리스 속도 제어를 위해 I-F 속도 제어에서 센서리스 속도 제어로의 절환 기법을 제안한다. 제안된 기법의 성능을 확인하기 위해 세탁기 구동 시스템에서 실험을 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1082-1087
• /
• 2003

In this paper, we address the development of magnetic levitation positioning system. This planar magnetic levitator employs four permanent magnet liner motors. Each motor generates vertical force for suspension against gravity, as well as horizontal force for drive levitation object called a platen This stage can generate six degrees of freedom motion by the vertical and horizontal force. We derived the mechanical dynamics equation using lagrangian method and used coenergy to express an electromagnetic force. We proposed control algorithm for the position and posture control from its initial value to its desired value using sliding mode control. Some simulation result is provided to verify the effectiveness of the proposed control scheme.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.399-404
• /
• 2016

This paper presents a new permanent magnet (PM) assisted topology for a recently introduced brushless wound rotor synchronous machine (BL-WRSM) [1]. The BL-WRSM had a dual-inverter configuration for generating a composite magneto motive force (MMF) with a fundamental component and a subharmonic component. The subharmonic component of the MMF is used for brushless excitation of the rotor. In this paper, additional PMs were introduced on the rotor of the BL-WRSM, making it a hybrid BL-WRSM. We also discussed the flux weakening operation for the hybrid BL-WRSM. The hybrid BL-WRSM offered advantages for starting the machine and provided better performance under full-load conditions. The finite element method (FEM) was used to analyze the performance of the hybrid BL-WRSM, and we compared its performance with BL-WRSM. Finally, prototypes were built with and without the PM-assistance, and experiments were conducted to demonstrate their performance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권6호
• /
• pp.301-308
• /
• 1999

According to the development of power electronic element(GTO, IGBT) and material for electrical machines(permanent magnet, super conductor), the technology for electrical machines is now a day rapidly developing. Here with, a novel electrical machine, based on the new conception of transverse flux configuration leads to a considerable increase in power density and enables simultaneously high efficiency. The designed and measured performance of transverse machine for railway traction system revealed a great potential of system improvements to reduce linear motor mass.

• 한국자기학회지
• /
• 제25권6호
• /
• pp.189-197
• /
• 2015

최근 차량의 연비규제 강화로 인해, 기존 내연기관의 차량 부품 구동방식이 유압방식 대신 전동방식으로 대체되어 가고 있다. 이러한 부품의 대표적인 예가, Electronic Power Steering(EPS)이며, 현재 대부분의 차량에 적용되고 있다. EPS의 핵심 부품으로서는 전동기가 있으며, EPS의 조향감 개선 및 진동/소음 저감을 위해 전동기의 Cogging torque 및 Torque Ripple 저감이 요구된다. 일반적으로 Cogging torque 및 Torque ripple을 저감하기 위해서, 고정자 또는 회전자에 스큐를 적용한다. 본 연구에서는 고정자에 스큐가 적용된 Bushless PMSM(Permanent Magnet Synchronous Motor)의 설계 방법 및 해석방법에 대해 소개한다. 고정자 skew가 적용된 EPS용 PMSM에 대해 초기 설계를 진행하고, RSM(Response Surface Methodology)을 이용한 최적설계를 수행한다. 유한요소해석을 통해 역기전력, Inductance, Load torque 등의 성능을 확인한다. 마지막으로 시제품 제작 및 실험을 통해 설계 방법에 대한 신뢰성을 검증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.779-784
• /
• 2001

For electrical vehicles, switched reluctance drives present a promising alternative-compared to asynchronous and synchronous (permanent magnet) concepts. For these applications, a very wide field weakening range is a key issue. Other requirements include high torque output from a small machine and low current ripple at the DC-side without the use of bulky filters - when powered from fuel cells or advanced Lithium-Ion-batteries. A new converter and control strategy according to these requirements is presented and compared to existing designs. The comparison is done for a drive system with a continuous power rating of 30 to 40 kW.