• Clinical and Experimental Pediatrics
• /
• v.49 no.11
• /
• pp.1186-1193
• /
• 2006

Purpose : Enterovirus infection is a type of viral infection that occurs relatively frequently in children during summer. It has clinical symptoms of non-specific fever, aseptic encephalomeningitis, gastrointestinal diseases, skin rash and, hand-foot-mouth disease. However, it can also occcaisionally, result in fatal symptoms like myocarditis, epicardial inflammation, transverse myelitis, quadriplegia and etc. There have been epidemic enterovirus studies, but not in the Chungnam area. Therefore, we undertook this study in order to comprehend the cause viruses in this area. Methods: We enlisted 157 children hospitalized with enteroviral infections at Soonchunhyang University hospital in Cheonan between May and August 2005. Cerebrospinal fluids or feces were collected during the acute phase after hospitalization, and observed the cytopathic effects caused by enterovirus and using reverse transcription polymerase chain reaction (RT-PCR). Results : The number of children hospitalized due to possible enteroviral infection during the period of study was 157. The number of children who tested positive with the reverse transcription polymerase chain reaction totalled 32 cases (20.4 percent). Among the children with entroviral diseases, 20 were male and 12 were female, thus the sex ratio of male to female was 1.67:1. Their clinical symptoms included fever most frequently (93.7 percent), was followed by headaches (90.0 percent), meningeal irritation signs (65.0 percent), and abdominal pain (30.0 percent). As for the type of isolated enterovirus, there were 17 cases of echovirus 18 and 6 cases of coxsackievirus B5. Furthermore, there were 2 cases of echovirus 9, 1 case of coxsackievirus A6 and coxsackievirus B3, respectively. But 5 cases were not determined by genotype. Conclusion : Echovirus 18 is circulating in Korea. We reported on identified enteroviruses, including echovirus 18, using RT-PCR in the Chungnam area during the summer of 2005.

• Clinical and Experimental Pediatrics
• /
• v.45 no.4
• /
• pp.466-472
• /
• 2002

Purpose : The diagnosis of Meckel's diverticulum is difficult and delayed because it presents with various clinical symptoms. We evaluated clinical, imaging and pathologic findings of Meckel's diverticulum to facilitate detection of Meckel's diverticulum in children. Methods : Review of clinical, imaging, surgical and pathological findings in 10 children aged 7 days to 14 years with Meckel's diverticulum during an 8-year period, 1993-2001, at Ewha Womans University Hospital was undertaken. Results : The male to female ratio was 2.3 : 1. The chief complaint was painless lower gastrointestinal( GI) bleeding; others were abdominal pain, abdominal distention and vomiting, in order of frequency. The diagonsis before surgery were Meckel's diverticulum in 5 patients, non-reducible intussusception in 3 patients and intestinal obstruction in 2 patients. The diverticulum was located between 35 cm to 70 cm proximal to the ileocecal valve. The length of the diverticulum ranged from 4 cm to 12 cm and 80% of it was within 5 cm. A Meckel scan($^{99m}Tc-pertechnetate$ scintigraphy) after cimetidine administration was done in 6 cases. All 5 cases that presented with lower GI bleeding had ectopic gastric mucosa confirmed on pathology. Out of 5 cases of ectopic gastric mucosa, only 4 cases were positive on the Meckel's scan. Conclusion : In cases of unexplained GI bleeding, obstruction, or inflammation diagnostic workup should be carried out to rule out Meckel's diverticulum. Laparoscopy, high resolution ultrasonography and computed tomography of the abdomen may be indicated in the assessment of pediatric patient with lower GI bleeding, especially in patients with suspected bleeding from Meckel's diverticulum showing negative Meckel's scan.

• Clinical and Experimental Pediatrics
• /
• v.46 no.12
• /
• pp.1224-1229
• /
• 2003

Purpose : Bacterial meningitis is a serious disease, especially in the neonatal period, and it carries a significant degree of mortality and morbidity. Group B streptococcus(GBS) is a common cause of neonatal bacterial meningitis. The purpose of this study was to evaluate the clinical manifestations, treatment results and complications of GBS meningitis. Methods : We analyzed 29 cases retrospectively who had been admitted to the pediatric ward or NICU in Asan Medical Center from May 1990 to January 2002. They had proven GBS in culture or latex agglutination test in CSF. Results : The male to female ratio was 1 : 1.9. There were two cases of early onset type and 27 cases of late onset type. All cases had normal birth weight with full term at delivery. The perinatal predisposing factors were premature rupture of membrane(two cases), and maternal colonization(two cases). The most common presenting symptoms were fever and irritability. Associated diseases were GBS sepsis(21 cases). There was relatively high sensitivity to penicillin derivatives. There were abnormal brain CT or MRI findings in 16 cases(64%), such as infarction, encephalomalatic change, effusion, hydrocephalus, hemorrhage and abscess. The intensive care unit admission rate and the incidence of DIC were higher in the group with complications. Two cases were discharged against advice. Conclusion : We recommend early detection and active treatment in Group B streptococcal meningitis to improve the prognosis.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.309-314
• /
• 2009

Incidence of rice stripe disease, caused by Rice stripe tenuivirus (RSV), was surveyed during 2002 to 2004. The incidence area and ratio of diseased fields were decreased gradually during those period. Rate of diseased plants were 45.8%, 45.0% and 43.7% in the susceptible cultivars Chucheong, Saechucheong and Ilpum, respectively. However, the rate was 4.4% in resistant cultivar Hwaseong. In addition, breakdown rate was also significantly high in the susceptible cultivars in Chucheong, Saechucheong and Ilpum showing 33.6, 33.2 and 31.9%, respectively. In Hwaseong, the breakdown rate was 0.8%. Collection efficiency was compared between two insect vector collection methods. Insect-sucking machine method was much more efficient than sweeping net method in collecting small brown plant hopper (SBPH). According to the survey of the population density of the insect vector during 2002 to 2004, the national average population density was gradually decreased year by year, 3.6, 2.3, and 1.3%, respectively. This result was significantly related with the decrease of the incidence of rice stripe disease. Control efficiency of rice stripe disease by treating several seedling box and water surface with insecticides against SBPH resulted that imidacloprid GR, Fipronil FG, Clothianidin+Probenazole GR and Thiamethoxam GR showed over 80% of control efficiency at 28 days after treatment at the early stage in nursery.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.427-438
• /
• 2015

The effects of different feeding times, using a diet containing 800 ppm betaine, on production, blood profile, and the short-chain fatty acid (SCFA), was investigated using 240 Cherry Valley (Anas platyrhynchos) meat ducks exposed to a scorching heat wave. The animals were randomly assigned to four groups, each of which was replicated three times with twenty ducks per replicate. The experimental period was 42 days for each group. Four groups were assigned into C (heat wave control group without betaine), T1 (ad libitum group fed a diet containing 800 ppm betaine), T2 (diet-restricted group fed twice daily between 05:00-10:00 and 17:00-20:00, using a diet containing 800 ppm betaine), and T3 (night-restricted group, fed from 17:00-10:00, with a diet containing 800 ppm betaine). At 42 days, body weight increased in order of T2, T1, T3 compared to the heat wave control group although. However, these differences were not found between the groups of T1 and T3. The heat wave control group, provided an ad libitum diet without betaine (C), showed an elevated feed conversion ratio compared to the groups fed a diet containing betaine. However, these differences were not found between the groups of T1, T2 and T3. RBC and platelet profiles except for PLT and MPV showed statistically significant differences between study groups fed a diet containing betaine. T2 presented significantly higher blood electrolytes $Na^+$ and $Cl^-$ than the other groups. T2 also showed a blood gas level that was generally higher than the other groups. Total SCFA, acetic acid and propionic acid concentration has been the increasing trend in T2, but butyric acid, isobutyric acid and valeric acid concentration has been the decreasing trend in T2 compared to the other groups. It is concluded that the feeding-restricted group, fed two times daily between 05:00-10:00 and 17:00-20:00, with a diet containing 800 ppm betaine may improve growth performance in meat ducks exposed to a scorching heat wave.

• Journal of Distribution Research
• /
• v.17 no.2
• /
• pp.93-115
• /
• 2012

This study empirically examines the impact of changes in market shares among retailing types on the price index. The retailing type is classified into 6 groups: department store, big mart, super market, convenient store, specialty merchant, and on-line store. The market shares of retailing types are calculated by the ratio of each retailing type monthly sales to total monthly retailing sales in which total retailing sales is the sum of each retailing type sales. We employed several price indices: consumer price index (CPI), CPI for living necessaries, and fresh food price index. In addition, this study used fundamental price indices based on 25 product families as well as 42 representative products. The empirical model also included several variables in order to control for the macroeconomic effects and those variables are the exchange rate, M1, an oil price, and the industrial production index. The data is monthly time-series data spanning over the period from January 2000 to December 2010. In order to test for the stability of data series, we conducted ADF test and PP test in which the model and length of lag were determined by the relevant previous literature and based on the AIC. The empirical results indicate that changes in market shares among retailing types have impacts on the price index. Table A shows that impacts differ as to which price index to use and which product families and products to use. For department store, it lowers the price of food and non-alcoholic beverages, home appliances, fresh food, fresh and vegetables, but it keeps the price high for fresh fruit. The big mart retailing type has a positive impact on the price of food, nut has a negative effect on clothing and foot wear, non-food, and fresh fruit. For super market, it has a positive impact on food and non-alcoholic beverages, fresh food, fresh shellfishes, but increases the price of CPI for living necessaries and non-food. The specialty merchant retailing type increases the price level of CPI for living necessaries and fresh fruit. For on-line store type, it keeps the price high for CPI for living necessaries and non-food as well as fresh fruit. For the analysis based on 25 product families shows that changes in market shares among retailing types also have different effects on the price index. Table B summarizes the different results. The 42 representative product level analysis is summerized in Table C and it indicates that changes in market shares among retailing types have different effects on the price index. The study offers the theoretical and practical implication to these findings and also suggests the direction for the further analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.457-468
• /
• 1995

In order to develop a more practical culture system from the present running seawater tank system, two experiments of environmental factors, growth, survival rate and rearing density of olive flounder (Paralichthys olivaceus) were carried out for two consecutive years. Two groups of fish in initially averaging 7.5cm of total length, and 3.4g of body weight (EXP. I) and 5.0cm and 1.8g (EXP. II) were reared in the semi-closed recirculating seawater system equipped with the rotating biological contactors with the commercial culture scale. The dissolved inorganic nitrogen concentrations is EXP. I ranged 0,247-0.512 ppm of $NH_4-N$ (0.010-0.043 ppm of$NO_2-N$, and 0.108-0.342 ppm of $NO_3-N$, and those in EXP. II were 0.091-0.715 ppm, 0.002-0.045 ppm, and 0.007-0.277 ppm, respectively. Daily feeding rates of the fish were $0.67-2.41\%$ in EXP. I and $0.69-2.22\%$ in EXP_ II, and teed efficiency were $34.8-59.8\%\;and\;40.5-88.4\%$ in EXP. I and II, respectively. The average total ten說h and body weight were 40.0-42.8cm and 695.0-852.69g after 340 days culture in EXP. I, and 36.7-39.7cm and 552.4-706.4 g after 365 days culture in EXP. II, respectively. Survival rates of the fish at the end of EXP. I and II were $92.0\%\;and\;96.0\%,$ respectively. The ratio to body surface area of non-ocular side in all fish to bottom area of rearing tank, so-called covering rate, was used as an indicator of rearing density. The highest cowering rate and weight density of fish per $m^2$ of rearing tank at the end of experimental period were 2.2 and 34.1kg in EXP. I, and 2.6 and 36.3kg in EXP. II, respectively. For the commercial culture of olive flounder, the semi-closed recirculating seawater system was found to be more effective than the running seawater tank system in aspect to the fish productivity and protection of marine environment.

• Journal of Intelligence and Information Systems
• /
• v.18 no.4
• /
• pp.43-57
• /
• 2012

To enhance the competitive advantage in a constantly changing business environment, an enterprise management must make the right decision in many business activities based on both internal and external information. Thus, providing accurate information plays a prominent role in management's decision making. Intuitively, historical data can provide a feasible estimate through the forecasting models. Therefore, if the service department can estimate the service quantity for the next period, the service department can then effectively control the inventory of service related resources such as human, parts, and other facilities. In addition, the production department can make load map for improving its product quality. Therefore, obtaining an accurate service forecast most likely appears to be critical to manufacturing companies. Numerous investigations addressing this problem have generally employed statistical methods, such as regression or autoregressive and moving average simulation. However, these methods are only efficient for data with are seasonal or cyclical. If the data are influenced by the special characteristics of product, they are not feasible. In our research, we propose a forecasting framework that predicts service demand of manufacturing organization by combining Case-based reasoning (CBR) and leveraging an unsupervised artificial neural network based clustering analysis (i.e., Self-Organizing Maps; SOM). We believe that this is one of the first attempts at applying unsupervised artificial neural network-based machine-learning techniques in the service forecasting domain. Our proposed approach has several appealing features : (1) We applied CBR and SOM in a new forecasting domain such as service demand forecasting. (2) We proposed our combined approach between CBR and SOM in order to overcome limitations of traditional statistical forecasting methods and We have developed a service forecasting tool based on the proposed approach using an unsupervised artificial neural network and Case-based reasoning. In this research, we conducted an empirical study on a real digital TV manufacturer (i.e., Company A). In addition, we have empirically evaluated the proposed approach and tool using real sales and service related data from digital TV manufacturer. In our empirical experiments, we intend to explore the performance of our proposed service forecasting framework when compared to the performances predicted by other two service forecasting methods; one is traditional CBR based forecasting model and the other is the existing service forecasting model used by Company A. We ran each service forecasting 144 times; each time, input data were randomly sampled for each service forecasting framework. To evaluate accuracy of forecasting results, we used Mean Absolute Percentage Error (MAPE) as primary performance measure in our experiments. We conducted one-way ANOVA test with the 144 measurements of MAPE for three different service forecasting approaches. For example, the F-ratio of MAPE for three different service forecasting approaches is 67.25 and the p-value is 0.000. This means that the difference between the MAPE of the three different service forecasting approaches is significant at the level of 0.000. Since there is a significant difference among the different service forecasting approaches, we conducted Tukey's HSD post hoc test to determine exactly which means of MAPE are significantly different from which other ones. In terms of MAPE, Tukey's HSD post hoc test grouped the three different service forecasting approaches into three different subsets in the following order: our proposed approach > traditional CBR-based service forecasting approach > the existing forecasting approach used by Company A. Consequently, our empirical experiments show that our proposed approach outperformed the traditional CBR based forecasting model and the existing service forecasting model used by Company A. The rest of this paper is organized as follows. Section 2 provides some research background information such as summary of CBR and SOM. Section 3 presents a hybrid service forecasting framework based on Case-based Reasoning and Self-Organizing Maps, while the empirical evaluation results are summarized in Section 4. Conclusion and future research directions are finally discussed in Section 5.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.89-117
• /
• 2018

The Korean companies are intensifying competition with not only domestic companies but also foreign companies in globalization. In this environment, it is essential activities not only for large companies but also Small and Medium Enterprises (SMEs) to get and develop the core competency. Particularly, SMEs that are inferior to resources of various aspects, such as financial resources etc., can make innovation through effective R&D investment. And then, SMEs can occupy a competency and can be survive at the environment. Conventionally, the method of "self-development" by using only the internal resources of the company has been dominant. Recently, however, R&D method through cooperation, also called "Open Innovation", is emerging. Especially SMEs are relatively short of available internal resources. Therefore, it is necessary to utilize technology and resources through cooperation with external companies(such as joint development or contract development etc.) rather than self-development R&D. In this context, we confirmed the effect of SMEs' factors on sales in Korea. Specifically, the factors that SMEs hold are classified as 'Technical characteristic', 'Company competency', and 'R&D activity' and analyzed how they influence the sales achieved as a result of R&D. The analysis was based on a two-year statistical survey conducted by the Korean government. In addition, we confirmed the influence of the factors on the sales according to the R&D method(Self-Development vs. Open Innovation), and also observed the influence change in 29 industrial categories. The results of the study are summarized as follows: First, regression analysis shows that twelve factors of SMEs have a significant effect on sales. Specifically, 15 factors included in the analysis, 12 factors excluding 3 factors were found to have significant influence. In the technical characteristic, 'imitation period' and 'product life cycle' of the technology were confirmed. In the company competency, 'R&D led person', 'researcher number', 'intellectual property registration status', 'number of R&D attempts', and 'ratio of success to trial' were confirmed. The R&D activity was found to have a significant impact on all included factors. Second, the influence of factors on the R&D method was confirmed, and the change was confirmed in four factors. In addition, these factors were found that have different effects on sales according to the R&D method. Specifically, 'researcher number', 'number of R&D attempts', 'performance compensation system', and 'R&D investment' were found to have significant moderate effects. In other words, the moderating effect of open innovation was confirmed for four factors. Third, on the industrial classification, it is confirmed that different factors have a significant influence on each industrial classification. At this point, it was confirmed that at least one factor, up to nine factors had a significant effect on the sales according to the industrial classification. Furthermore, different moderate effects have been confirmed in the industrial classification and R&D method. In the moderate effect, up to eight significant moderate effects were confirmed according to the industrial classification. In particular, 'R&D investment' and 'performance compensation system' were confirmed to be the most common moderating effect by each 12 times and 11 times in all industrial classification. This study provides the following suggestions: First, it is necessary for SMEs to determine the R&D method in consideration of the characteristics of the technology to be R&D as well as the enterprise competency and the R&D activity. In addition, there is a need to identify and concentrate on the factors that increase sales in R&D decisions, which are mainly affected by the industry classification to which the company belongs. Second, governments that support SMEs' R&D need to provide guidelines that are fit to their situation. It is necessary to differentiate the support for the company considering various factors such as technology and R&D purpose for their effective budget execution. Finally, based on the results of this study, we urge the need to reconsider the effectiveness of existing SME support policies.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2197-2204
• /
• 2000

Lignin is a major component of wastewater generated in the chemical processing of wood. Because it is recalcitrant, it inhibits biological treatment of wastewater of pulp manufacturing, especially high concentration of lignin may inhibit the anaerobic digestion. The objective of this study was to evaluate the toxicity of high molecular hardwood lignin (lignosulfonate, MW $\geq$ 20,000) on aceticlastic methanogens in the batch reactors at different temperatures with different sludge concentrations, using anaerobic serum bottles. The hardwood lignin was found to inhibit anaerobic conversion of acetate to methane and carbon dioxide, shown with a long lag-phase before methanogenesis started. The methanogens assumed not to be able to acclimate to the lignin were found to be acclimated slowly in the batch experiments, finally reaching non-toxic levels in which methane production could start. The hardwood lignin was found not to be bacteriocidal but bacteriostatic to aceticlastic methanogens. Hardwood lignin(lignosulfonate) at 1.3, 2.6, and 3.9%(w/w) inhibited the acetateutilizing methanogens of anaerobic digester sludge by 14.5, 17.8, 21.1 days(in noninhibitory condition it took 10 days) to produce the same amount of methane. The inhibitory effect of lignin was examined at temperature ranges of $30^{\circ}C$ to $50^{\circ}C$. When 2.6% of lignin was contained in wastewater, methane production was highest at $30^{\circ}C$ during initial 8 days. At $4^{\circ}C$, methane production rapidly increased after 12 days of digestion, the value became higher than that at $30^{\circ}C$ after 14 days. However, the methane production was completely inhibited during whole digestion period at $50^{\circ}C$. High ratio of lignin concentration to initial anaerobic sludge concentration gave tolerance to the inhibition. In this experiment, high molecular hardwood lignin was not degraded and decolorized.