• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.478-487
• /
• 1996

A " plucking rolls device" was developed in this study to improve the quality of harvested tea leaves. In this report, the outline of the system and the results of performance experiments in our laboratory are discussed. Tow kinds of performance experiments were carried out. The first experiment checked harvesting accuracy by using a plucking unit that was developed for harvesting machine installation. The second experiment was a harvesting experiment which utilized a fron bar in order to prevent cutting of the tea buds which had been a problem in precious experiments . As a results of the first experiments , it was confirmed that selective harvesting obtained high quality tea leaves. but a cutting problem that, when the harvesting seed was faster than the working speed, which was non-selective harvesting , was also seen. In the second experiment, the cutting rate decreased to a maximum of 50% level, when tea buds most bent ahead by the front bar. The effect was seen that cutt ng problem was alleviated from this.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.802-811
• /
• 2020

Objective: Two experiments were conducted to investigate the effects of dietary sucralose on diet preference and growth performance of weaned piglets, and a third experiment was a 28-d safety study to examine if high-dose sucralose could affect the health state of weaned piglets. Methods: In experiment one, 48 piglets had free access to a corn-soybean based diet and the same diet supplemented with 150 mg/kg sucralose for 15 d. In experiment two, 180 piglets were blocked into 5 treatments with 6 replications. They were fed basal diets supplemented with 0, 75, 150, 225, and 300 mg/kg sucralose for 28 days. In experiment three, 108 piglets were randomly assigned to 3 treatments and fed diets supplemented with 0, 150 (suitable level), and 1,500 (ten-fold suitable level) mg/kg sucralose for 28 d. Results: The experiment 1 showed that piglets preferred (p<0.05) diets containing sucralose during experimental period. In experiment 2, piglets fed a diet supplemented with 150 mg/kg sucralose had a higher average daily gain (ADG) and average daily feed intake (ADFI) than pigs in the control group and other treatment groups during the experiment period. The concentrations of sucralose over 150 mg/kg may decrease feed intake. However, no difference in feed conversion ratio was observed. In experiment 3, piglets fed diet supplemented with 150 mg/kg sucralose had a higher ADG and ADFI than that of pigs in the control group and 1,500 mg/kg treatment groups during the experiment period. Clinical blood metabolites, organ index and histological morphology were not significantly different between sucralose treatments. Conclusion: Sucralose can promote feed intake and thereby improve growth performance of weaned piglets. Moreover, inclusion of 1,500 mg/kg sucralose was demonstrated to have no observed adverse effects. Supplementing 150 mg/kg sucralose for weaned piglets is recommended in this study.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.333-339
• /
• 2004

This paper is concerned with an experimental investigation about tractive performance of a tracked vehicle on extremely soft soil. A tracked vehicle model with principal dimensions of $0.9\;m(L)\;{\times}\;0.75\;m(B)\;{\times}\;0.4\;m(H)$ and the weight of 167 kg was constructed with a pair of driving chain links driven by two AC-servo motors. The tracks are configured with detachable grousers with variable span. Deep seabed was simulated by means of bentonite-water mixture in a soil bin of $6.0\;m(L)\;{\times}\;3.7\;m(B)\;{\times}\;0.7\;m(H)$. Slip of vehicle and driving torque of motor were measured with respect to experimental variables; grouser span, grouser chevron angle, driving speed, drawbar-pull weight, position of center-of-gravity and weight. $L_8$ orthogonal array is adopted for DOE (Design Of Experiment). The effects of experiment variables on traction performance are evaluated.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.5
• /
• pp.449-457
• /
• 2013

Objective: The aim of this study is to investigate the effect of Hangul font on reading speed when texts are displayed on the computer screen. Background: Reading performance is influenced by fonts. However, there are few studies of Hangul font from a cognitive perspective. Fonts could affect reading performance directly and indirectly, interacting with other visual-perceptual factors such as size, word spacing, and line spacing. Method: In experiment 1, two variables were manipulated; a frame condition(square frame non-square frame) and a stroke condition(serif sans-serif). According to each condition, one of the four fonts was applied to the texts. The height of the four fonts was controlled. The participants were asked to read aloud the presented texts. In experiment 2, the non-square frame fonts were adjusted to have approximately the same size, width, letter spacing, and word spacing as the square frame fonts. The experimental design and task used in experiment 2 were identical with experiment 1. Results: In general, reading speed was faster in the square frame fonts than in the non-square frame fonts. The reading speed was not significantly different across stroke conditions. Conclusion: The frame of Hangul font significantly influenced reading speed. These results suggest that the type of Hangul font is a factor to affect reading performance. Application: The frame of fonts should be considered in designing of new fonts. The square frame fonts should be the preferred choice to enhance legibility.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.4
• /
• pp.559-566
• /
• 2013

PURPOSE: The present study examines how feedback respiratory exercise affects gait performance of stroke patients. METHODS: Forty stroke patients were randomly divided into an experiment group and a control group. For the former group, patients went through a half-hour of training therapy and a half-hour of feedback respiratory device exercise. For the latter group, patients went through 30 minutes of training therapy and a half-hour of motomed exercise. All participants had five training sessions each week for four weeks. For measurement, a GAITRite system was used to examine spatial parameters, and functional ambulation performance before and after the training. RESULT: In terms of spatial parameters, double support ratio, stance phase increased significantly in the experiment group after the walking exercise(p<.05). FAP rose more significantly in the experiment group than in the control group(p<.05). In comparison of two exercise groups, double support ratio, Stance phase, gait velocity, FAP was significant difference(p<.05). CONCLUSION: The experiment results showed that feedback respiratory exercise is effective in enhancing gait performance.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1096-1101
• /
• 2005

In this study, the experiment of thermal performance about closed-type hybrid cooling tower was conducted. A closed type cooling tower is a device similar to a general cooling tower, but with cooling tower replaced by a heat exchanger. The test section for this experiment has the process that the cooling water flows from top part of heat exchanger to bottom side in the inner side of tube, and spray water flows gravitational direction in the outer side of it. Air contacts of tube outer side are counterflow. The heat transfer pipe used in this experiment is a bare type tube having an outside diameter of 15.88mm. In this experiment, heat performances of the cooling tower are calculated such as overall heat transfer coefficient of between the process fluid and air, cooing capacity and pressure drop.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1300-1309
• /
• 2010

In the railway bridges, steel plate girder types are preferred due the high stability. Nevertheless, it has been pointed out that this type of bridge has problems such as, structural damages in the rail and girder seat, noise problem due to impact at the rail joint and excessive vibration. This vibration and/or deflection are mainly because insufficient stiffness of steel plate type of bridge. To resolve these problems, PC-Slab composite plate girder type which has simple process and economic cost, is proposed in this study. The static and dynamic experiment is performed by using the production of actual sized PC-Slab and abandoned steel plate girder. The object of this experiment is to verify the fact that girder stiffness increase and structural safety. The result of the experiment is used to analyze the effect of performance improvement of PC composite plate girder type. Using this method, economic rail maintainers, girder stiffness increase, and also speed/ride improvement even for existing rail could be expected by dynamic performance improvement. Additionally noise due to impact, deflection and vibration caused from long rails can be reduced.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.88-92
• /
• 2005

The experiment of thermal performance about closed-wet cooling tower was conducted in this study. A closed cooling tower is a device similar to a general cooling tower, but with cooling tower replaced by a heat exchanger. The test section for this experiment has the process that the cooling water flows from the top of the heat exchanger to the bottom side in the inner part of the tube, and spray water flows in the gravitational direction in the outer side. Air comes in direct contact with the spray water at the outer side of the tube while passing from the lower the upper part having a counterflow to the spray water. The heat transfer pipe used in this experiment is a bare-type tube having an outer diameter of 15.88mm. The heat exchanger is consisted of seven rows and fifteen columns. In this experiment, thermal performance of the cooling tower is derived from overall heat transfer coefficients between the process fluid and sprayed water and volumetric overall mass transfer coefficient between sprayed water and air.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.309-317
• /
• 2012

Objective: The aim of this paper is to inquire into the influences form factors and control types affect a search time and comfort at list menu of full touch phone. Background: Various studies have been proceeded that are related to the optimum touch area for enhancing usability of control and legibility in mobile touch device. In the environment of list menu which is widely used to provide various information effectively, however, not only comprehensive consideration for legibility and control is to be seek but also research for control type which is to scroll a list. Method: This study executed form factor experiment to inquire into the influence that font size, height of row and fixed area affect searching time and comfort in the while information processing even if the information on the list is unsorted in alphabetical order. Among the result of form factor experiment, control type experiment was executed by selecting shortest performance time, highest legibility comfort and control comfort. Control type experiment was implemented to figure out the influence which existing flicking type, scrolling bar type, newly established button page type and button raw types affect performance time and subjective comfort depending on location of the information. Results: Font size 12pt, height of row 7mm and fixed area 15mm was shortest performance time and got highest comfort and legibility score in form factor experiment. A Button page which was newly proposed type was shortest performance time and got highest comprehensive comfort in control type experiment. Conclusion: Form factor experiment showed similar results with the study through reading a long passage of character or controlling a grid icon type. However, height of row turned out to affect not only touch area for control but also legibility by ruling space between the lines. Button page type which was newly proposed showed shortest performance time and got highest comprehensive comfort. Because Button page type needs few finger movements than other control types and implements search in the fixed form, unlikely other type which list keeps moving. Application: This study should be applied in deciding form factors and control type for scroll when designing a list menu of full touch phone.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.133-139
• /
• 2008

With the increasing demand for higher production quality and growing competition in the global market, coordinate measuring machine(CMM) has been widely used in industry to improve the efficiency and effectiveness of measurement. In this paper the performance evaluation of coordinate measuring machine is proposed using design of experiments. A factorial design is applied to carry out the performance test proposed by ISO 10360 with a length bar and to investigate CMM measurement errors associated to orientation and length in the work volume. The determination of the significance of effects in an experiment is made through the analysis of variance(ANOVA). The results show that the proposed method is suitable to analyze the factors which affect the CMM measurement performance.