• 대한임베디드공학회논문지
• /
• 제12권4호
• /
• pp.193-204
• /
• 2017

Various 3D-stacked DRAMs have been proposed to overcome the memory wall problem. Hybrid Memory Cube (HMC) is a true 3D-stacked DRAM with stacked DRAM layers on top of a logic layer. The logic die is mainly used to implement a memory controller for HMC, and it is connected through a high speed serial link called SerDes with a host that is either a processor or another HMC. In HMC, the serial link is crucial for both performance and power consumption. Therefore, it is important that the link is configured properly so that the required performance should be satisfied while the power consumption is minimized. In this paper, we propose a HMC system model included the high speed serial link to estimate performance accurately. Since the link modeling strictly follows the link flow control mechanism defined in the HMC spec, the actual HMC performance can be estimated accurately with respect to each link configuration. Various simulations are conducted in order to deduce the correlation between the HMC performance and the link configuration with regard to memory utilization. It is confirmed that there is a strong correlation between the achievable maximum performance of HMC and the link configuration in terms of both bandwidth and latency. Therefore, it is possible to find the best link configuration when the required HMC performance is known in advance, and finding the best configuration will lead to significant power saving while the performance requirement is satisfied.

• 한국음향학회지
• /
• 제43권4호
• /
• pp.445-454
• /
• 2024

소나를 이용한 수중 표적 탐지를 위해서는 해양환경 및 소나 특성이 반영된 탐지성능 분석이 수행되어야 한다. 수동 및 단상태 소나의 탐지성능 모델링은 해양환경을 고려하더라도 비교적 신속하게 수행될 수 있다. 하지만 양상태 및 다중상태 소나의 경우 수동 및 단상태 소나에 비해 계산 측면에서 높은 복잡성과 연산량이 요구되기 때문에 국내외에서는 음속구조나 해저지형과 같은 해양환경을 고려하지 않거나 단순화된 형태로 양상태 및 다중상태 탐지성능 분석이 수행되고 있다. 따라서 본 연구에서는 동해 울릉분지 해역에서의 음파전달 특성 분석을 통해 잔향음과 해양환경이 양상태 탐지 성능에 미치는 영향을 분석하였다. 수평 방위 해상도 변화 및 소음제한환경 가정 여부에 따른 탐지성능 모델링을 수행하였다. 이로부터 소나운용 수심이 최소음속층에 가까워질수록 해저지형의 영향이 줄어들며 잔향음 제한환경은 비교적 근거리에서만 형성된다는 것을 관찰하였다. 이러한 경향은 단순화하여 계산한 탐지성능 모델링의 결과와 정교하게 계산된 양상태 탐지성능 모델링 결과의 비교를 통해서도 확인 가능하였다.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1043-1049
• /
• 2012

The FEM analysis of machine tools is the general analysis process to evaluate machine performance in the industry for a long time. Despite advances in FEM software, because of difficult simplicity of CAD drawing, little experience of joints stiffness modeling and troublesome manual contact area divide for bindings, the industry designers think the FEM analysis is still an area of FEM analysis expert. In this paper, the automation of modeling process with simplicity of drawing, modeling of joints and contact area divide is aimed at easy FEM analysis to enlarge utilization of a virtual machine tools. In order to verify the effects of modeling automation, a slant bed type model with tilting table is analyzed. The results show FEM modeling automation method only needed 45 minutes to complete the whole modeling process, while manual modeling method requires almost one month with 8200 calculations for coordinate transformations and stiffness data input.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.47-51
• /
• 2015

Faces play a key role in revealing the personalized attributes such as the identity, emotion, health condition, etc. Due to the importance of faces, computer-assisted face modeling and reconstruction have been actively studied both in computer vision and graphics community. Especially, face reconstruction and realistic face synthesis are well-grounded research problems and various approaches have been proposed during the last decade. In this paper, we discuss a wide range of existing work in face modeling by introducing their target applications, categorizing them upon their methodology and addressing their strength and weakness on performance. Finally, we introduce remaining research issues and suggest the future research direction in face modeling. We believe that this paper provides a high-level overview on face modeling techniques and helps understand the major research issues and the trends of methodology.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.194-205
• /
• 2009

In geotechnical engineering, the mechanical characteristics of soil, the main material of geotechnical engineering, is highly related to the confining stress. Reduced-scale physical modeling is often conducted to evaluate the performance or to verify the behavior of the geotechnical systems. However, reduced-scale physical modeling cannot replicate the behavior of the full-scale prototype because the reduced-scale causes difference of self weight stress level. Geotechnical centrifuges are commonly used for physical model tests to compensate the model for the stress level. Physical modeling techniques using centrifuge are widely adopted in most of geotechnical engineering fields these days due to its various advantages. In this paper, fundamentals of geotechnical centrifuge modeling and its application area are explained. State-of-the-art geotechnical centrifuge equipment is also described as an example of KOCED geotechnical centrifuge facility at KAIST.

• 전력전자학회논문지
• /
• 제25권3호
• /
• pp.227-234
• /
• 2020

This paper presents the methods for the modeling and parameter optimization of the electric vehicle battery. The state variables of the battery are defined, and the test methods for battery parameters are presented. The state-space equation, which consists of four state variables, and the output equation, which is a combination of to-be-determined parameters, are shown. The parameter optimization method is the key point of this study. The least square of the modeling error can be used as an initial value of the multivariable function. It is equivalent to find the minimum value of the error function to obtain optimal parameters from multivariable function. The SIMULINK model is presented, and the 10-hour full operational range test results are shown to verify the performance of the model. The modeling error for 25 degrees is approximately 1% for full operational ranges. The comments to enhance modeling accuracy are shown in the conclusion.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.364-371
• /
• 2013

Because of the increases in international oil prices and the level of global warming, the automotive industry has much interest in developing green cars with high fuel efficiencies. In addition, researchers in Korea are actively responding to high oil prices and $CO_2$ emission regulations in many ways. One example is, the multi-mode hybrid system, which is being studied to improve its performance. Because a multi-mode hybrid system is able to overcome the weaknesses of a system that uses simple planetary gears, excellent fuel efficiency and driving performances are the key features of the system. This paper analyzes the driving performance of the power-train system of GM-2MT70, which consists of one engine, two electric motors, one simple planetary gear, one double planetary gear, two clutches, and two brakes. The driving performance of the system's steady state is analyzed using performance modeling. The dynamic performance is analyzed using Matlab Simulink.

• 한국식생활문화학회지
• /
• 제27권4호
• /
• pp.354-366
• /
• 2012

The objective of this study was analyze the relationship among emotional intelligence, job attitude (job satisfaction, organizational commitment, turnover intention), and organizational performance in kitchen staff. A survey collected data from foodservice employees (N=611). Statistical analyses were completed using SPSS Win (17.0) for descriptive analysis, reliability analysis, factor analysis, t-test, correlation analysis, and AMOS (7.0) for confirmatory factor analysis and structural equation modeling. The main results of this study were as follows. The four EI (Emotional Intelligence) dimensions significantly correlated with age. The mean of the job satisfaction score was 3.24. The organizational commitment score was 3.54. The organizational commitment score was higher for 'loyalty' factor than for 'sense of belongs' factor. The mean of organizational performance score was 3.61. The four EI(Emotional Intelligence) factors were significantly correlated with job satisfaction (organizational commitment, organizational performance, and turnover intension). Structural equation modeling found that emotional intelligence had positive effects on job satisfaction, organizational commitment, and organizational performance, whereas job satisfaction and organizational performance had positive effects on organizational performance. Therefore, this study found that emotional intelligence had direct and indirect effects on organizational performance.

• 보건행정학회지
• /
• 제16권4호
• /
• pp.1-23
• /
• 2006

There is general consensus in the research literature that market orientation is related to organizational performance. The study examines this relationship in the Korean hospital industry. One feature of this study is to examine the differences between large and small hospitals in terms of their market orientation, performance and the relationship between these constructs. The other feature is that both market orientation and performance are conceptualized as being multi-dimensional constructs. Hence a structural equations modeling (SEM) technique is used to examine the dimensionality of market orientation and performance and to examine the nature of this relationship. Data for this study are collected using a questionnaire that is mailed to the top marketing-related managers of 1,048 hospitals. Usable responses are obtained from 230 hospitals for a response rate of 21.9%. The SEM results confirm the multi-dimensional nature of both market orientation and performance, and the strong relationships between the constructs. Interestingly, this relationship is found to be much stronger for smaller hospitals than for larger hospitals. For smaller hospitals, this study shows that market orientation has a tremendous influence on performance, with almost 73.9% of the variance in performance being attributed to market orientation.

• 한국추진공학회지
• /
• 제13권5호
• /
• pp.57-63
• /
• 2009

본 논문에서는 항공기 POD용 환경조절장치의 개발을 위한 모델링 및 시뮬레이션에 관한 연구를 수행하였다. 먼저, 시스템 요구성능을 분석하여 ACM 방식의 환경조절장치를 구성하고 성능모사를 위한 모델링을 수행하였다. 다음으로 각 구성품의 개념설계를 위해 주요구성품의 성능변화에 따른 민감도를 분석하고 시스템 요구성능을 만족하는 설계점 성능을 결정하였다. 다양한 비행환경에서의 탈설계 성능 모사를 통해 전체 운용영역에서의 개념설계 타당성을 검토하고 천이 성능해석을 통해 동적 거동특성을 분석하였다.