• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.416-421
• /
• 2005

Most of solar system dissemination has been focused on domestic hot water system of which utilization to a building is relatively simple and safe than solar heating system. Through the survey on a cause of solar house dissemination failure in Korea, we conclude that design integration and systematic approach method for technology application are the most important element for a successful solar house. KIER(Korea Institute of Energy Research) and Hanbat National University have started new project on a development of Zero energy Solar House, called ZeSH which can be sustained just by natural energy without the support of existing fossil fuel. This is the 1st phase research of 10 years long-term ZeSH plan which develops a low-cost and $100\%$ self sufficient ZeSH. The goal of 1st phase ZeSH research is to get a $70\%$ self sufficiency only in thermal loads. Actual demonstration house, named KIER ZeSH I was designed and constructed as a result of 1st phase research work in the end of 2002. Various innovative technologies such as super insulation, high performance window, passive and active solar systems, ventilation heat recovery system are applied and evaluated to the KIER ZeSH I. A lot of computer simulations had been conducted for the optimal design and system integration in every design steps. Considering all the results from detailed hourly computer simulation, it is expected that at least $70\%$ self-sufficiency in thermal loads which is 1st phase target value can be excessively achieved in actual demonstration house. Besides, many valuable findings from the design and analysis to construction could be established such as collaboration method among the participants, practical design and construction techniques for system integration and the others. The purpose of this paper is to introduce the main findings through the development of KIER ZeSH I project. Practical guidelines in every design step for new low- or zero- energy solar house is proposed as result.

• Health Policy and Management
• /
• v.24 no.4
• /
• pp.396-412
• /
• 2014

Background: As a reform plan of health care system, Accountable Care Organization (ACO) has became an object of attention in the United States after Patient Protection and Affordable Care Act was enacted. ACO is a group of various health care providers and provide coordinated care to its assigned beneficiaries. If ACOs improve the quality level and reduce the cost of care, they can get financial incentives. Under the discussion for a quite long time and demonstration projects, ACO has been established. We aimed to analysis and discuss the history, policy mechanism, contents, status and outcomes of ACO. Also, we intended to suggest political implication Korean health care system with regard to ACO. Methods: We searched the articles related ACO in PubMed and selected several available papers about ACO. Total 56 studies were reviewed and categorized three parts; demonstration projects for formation of ACO, policy mechanism and agenda, empirical results of ACO performance. Results: As a result, establishment of ACO was successful partly in the US. It seems to be due to various project and pilot test for verification in the long time. The empirical effect of ACO was also identified in a few study but it needs more evidences to judge its positive effect. Conclusion: In Korea, there are arguments for the application of ACO. However it is difficult to implement a ACO by different political conditions between Korean and US. Nevertheless ACO proposed us the necessity of paradigm shift in our health policy and could be significant to national policy orientation in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2008

[ $^{169}Yb$ ] industrial NDT sealed sources were developed by using $Yb_2O_3$ pellets as the target and demonstrated for their performance. To produce the pellets, optimal compacting and sintering conditions were determined experimentally. Source holders for $^{169}Yb$ were designed and fabricated. After assembling an active source produced from HANARO with the developed source holder, a demonstration experiment was performed to compare the quality of the radiographs from $^{192}Ir$ and soft X-rays. This demonstration study showed that the developed $^{169}Yb$ produced better radiographs than $^{192}Ir$ for a carbon steel with less than a 4 mm thickness.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.53-58
• /
• 2020

Korea Electric Power Corporation (KEPCO) uses large amount of SF₆, one of the potent greenhouse gases, in electric equipment for electrical insulation. KEPCO is developing SF₆ recovery and purification technology to minimize the release of SF₆ into the environment, to secure certified emission reduction, and to save purchase cost of new SF₆ by reusing the refined SF₆. A prototype SF₆ purification system using cryogenic solidification technology has been built in demonstration scale. To evaluate the feasibility of the commercialization, the system has been operated to purify large amount of used SF₆ in a long-term operation and the performance has been economically evaluated. The system was stable enough for commercial operation such that it was able to purify 5.4 tons of used SF₆ from power transmission equipment in 2-month operation. Over 99% of the SF₆ was recovered from the used gas and the purity of the purified gas was over 99.7 vol%. The operation cost, which is the cost of refrigerant (liquid nitrogen), electricity and labor, per kilogram of purified SF₆ was 6,526 KRW. Considering the price of new SF₆ in Korea is about 15,000 KRW per kilogram this year, about 56% of the purchase cost can be saved.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.61-64
• /
• 2008

Purpose: The analysis of individual eye model designed from clinical demonstration about emmetropia shows that the aberration would be changed by the wave change. Method: The model on the basis of clinical demonstration of eye ball is designed in a form of having 4 refraction surfaces and a constant refractive index. We analyzed designed twelve individual eye model into aberrations changes, as giving changes Fraunhofer lines's six wavelengths. Result: About individual eye model, change in the wavelength of the wavefront aberrations analysis using the Zernike coefficient. This data indicate that the shorter wave is, the more defocus increases and the deviation value of spherical aberration and RMS are widened. Conclusion: As quantity of defocus according to result wavelength change is shorter and shorter, inclination which is similar twelve individual eye model is bigger and bigger and individual eye model majority of cases, little change, and change is shown in part individual eye model is a significant performance degradation can be raised.

• Korean Journal of Optics and Photonics
• /
• v.22 no.3
• /
• pp.151-158
• /
• 2011

This paper reports design and demonstration of optical systems for reflective-type remote optical displacement sensors. Optical systems for light illumination sources and a position sensitive detector (PSD) for the displacement sensor were developed to sense displacement of bridges and instability of skyscrapers in a distance range from 10 m to 250 m to an accuracy better than a few mm. Performance of the optical systems was verified by composing a displacement sensor and by using it in measurement of displacement of a remote target with proper reflective optics depending on distance. The displacement sensor was composed of two LED light sources, each with collimating optics, and a two-dimensional PSD with telescope-type optics. Its displacement resolutions was measured to be 0.1 mm at a distance of 10 m and less than 3 mm at a distance of 250 m.

• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.555-561
• /
• 2023

In this study, we proposed a standard model for the design, construction and demonstration of the technology development and substantiation of small hydrogen powered vessel in order to respond to the alternative fuel-using vessel market that requires the use of low-carbon/carbon-free fuel as a greenhouse gas reduction measure. The hydrogen fuel cell-based electric propulsion system developed through this is optimized through performance and durability tests on the land-based test site (LBTS), and the electric propulsion system applied to this result is mounted on a small hydrogen propulsion vessel and operated. Simultaneously, through the digital twin technology between the LBTS and the hydrogen-propelled vessel on the sea, the technology that can predict and diagnose the problems that can occur in the electric propulsion system of the vessel is applied to carry out the empirical study of the hydrogen-propelled vessel. In addition, we propose a commercialization model by analyzing the economic feasibility of the demonstration vessel.

• Journal of The Korean Association of Information Education
• /
• v.25 no.2
• /
• pp.355-365
• /
• 2021

Online teaching has become a daily routine in schools after 2020, and at the same time, the ability to design and conduct classes using smart devices and apps is becoming more important to teachers. Therefore, in this study, we tried to find out how the demonstration of classes using smart devices and apps online has an effect on the intentions of prospective teachers who want to use them in the future. To this end, classes were designed according to the design principles for improving smart education capabilities of pre-service teachers, and the classes were conducted for pre-service teachers. Afterwards, the variables included in the UTAUT model, such as Performance Expectancy, effort Expectancy, social influence, Voluntariness of Use, Behavioral Intention, and Facilitating Conditions, were measured before and after classes, respectively, and the effectiveness of the class was verified through t-test of response samples. As a result, it was confirmed that all variables except the Facilitating Conditions had a significant positive(+) effect. These results suggest that online class demonstration education can be a way for pre-service teachers to more practically adapt to the educational field where smart education is required.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.113-123
• /
• 2022

The required density relationship according to the press pressure of the floating die method and the homogeneity of the density distribution in the buffer block was evaluated to analyze the manufacturing characteristics of engineering scale bentonite-sand buffer blocks. In addition, the thermal conductivity was measured and compared with that of the pure bentonite buffer block to evaluate the level of thermal conductivity performance improvement of the bentonite-sand buffer material. As a result, it was confirmed that the standard deviation of dry density decreased to 0.011 and showed a homogeneous density distribution under the condition of press pressure greater than 400 kg/cm². Furthermore, as a result of the thermal conductivity test, the thermal conductivity of the buffer with optimum moisture content conditions was 1.345 and 1.261 W/(m·K) under the press pressure of 400 and 600 kg/cm², respectively. It increased by 16.1% and 11.0% compared to the pure bentonite buffer material. Based on the results of this study, it is judged that it can be used as fundamental data for manufacturing a homogeneous bentonite-sand buffer block on an engineering scale.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.575-583
• /
• 2021

This study aims to analyze Taekwondo trends according to news articles by year by applying topic modeling. In order to examine the Taekwondo trend through media reports, articles including news articles and Taekwondo specialized media articles were collected through Big Kinds of the Korea Press Foundation. The search period was divided into three sections: before 2000, 2001~2010, and 2011~2020. A total of 12,124 items were selected as research data. For topic analysis, pre-processing was performed, and topic analysis was performed using the LDA algorithm. In this case, python 3 was applied for all analysis. First, as a result of analyzing the topics of media articles by year, 'World' was the most common keyword before 2000. 'South and North Korea' was next common and 'Olympic' was the third commonest topic. From 2001 to 2010, 'World' was the most common topic, followed by 'Association' and 'World Taekwondo'. From 2011 to 2020, 'World', 'Demonstration', and 'Kukkiwon' was the most common topic in that order. Second, as a result of analyzing news articles before 2000 by topic modeling, topics were divided into two categories. Specifically, Topic 1 was selected as 'South-North Korea sports exchange' and Topic 2 was selected as 'Adoption of Olympic demonstration events'. Third, as a result of analyzing news articles from 2001 to 2010 by topic modeling, three topics were selected. Topic 1 was selected as 'Taekwondo Demonstration Performance and Corruption', Topic 2 was selected as 'Muju Taekwondo Park Creation', and Topic 3 was selected as 'World Taekwondo Festival'. Fourth, as a result of analyzing news articles from 2011 to 2020 by topic modeling, three topics were selected. Topic 1 was selected as 'Successful Hosting of the 2018 Pyeongchang Winter Olympics', Topic 2 was selected as 'North-South Korea Taekwondo Joint Demonstration Performance', and Topic 3 was selected as '2017 Muju World Taekwondo Championships'.