• 품질경영학회지
• /
• 제22권1호
• /
• pp.122-132
• /
• 1994

So far, the Taguchi Method has dealt with multiple quality characteristics under the assumption that they are independent. Since the relationships between quality characteristics are practically important, this study proposes a new performance measure considering the correlation among characteristics. In this paper, we impose weight on each characteristic and correlation among characteristics. The loss function of multiple characteristics is defined in accordance with combination of simple characteristic types, and it is divided into terms of loss that characteristic itself and the correlation among characteristics cause. And the proposed method uses the expected loss of multiple characteristics as the new performance measure. The data in literature are used to compare with the existing performance measures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.782-791
• /
• 1998

This paper presents a computer simulation of five types of triple effect absorption cycles employ-ing the refrigerant absorbent combinations of NH3/LiNO3 low-pressure type NH3/LiNO3+H2O/LiBr binary two-stage type series flow cycle and two types of parallel flow cycle for H2O/LiBr. The absorption systems is investigated through cycle simulation to obtain the system characteristics with the cooling water inlet temperature approach temperature of absorber loss temperature of absorber and chilled water outlet temperature. The most important characteristic temperature of absorber and chilled water outlet temperature. The most important characteristic of NH3/LiNO3 low-pressure type and a NH3/LINO3+H2O/LiBr binary two-stage type is that it obtains a coefficient of performance higher than the sum of the performance coefficients of its part operating independently. As a result of this analysis the optimum designs and operating conditions were determined based on the operating conditions and the coefficient of performance.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.497-502
• /
• 2005

In this study. the effect of volute area distribution on the performance of a centrifugal pump were numerically studied using a commercial CFD code. To reduce the shutoff head, maintaining head and efficiency at a design flow rate. the flat head-capacity characteristic curves in which the head varies only slightly with capacity from shutoff to design capacity are frequently required. In order to control the shutoff head of a pump, several volute cross-sectional area distributions were proposed as a main parameter with the same impeller geometry. The calculation results show that the slope of the performance characteristic curve of the centrifugal pump can be controlled by modifying the area distribution from volute tongue to volute outlet with fixed volute outlet area and also varied volute outlet area.

• 품질경영학회지
• /
• 제22권3호
• /
• pp.34-53
• /
• 1994

Taguchi's robust design methodology has focused only on a single performance characteristic or response, but the quality of most products is seldom defined by a characteristic, and is rather the composite of a family of characteristics which are often interrelated and nearly always measured in a variety of units. The multiple performance characteristics problem is how to compromise the conflicts among the selected levels of the design parameters for each individual performance characteristic. In this paper, the modified desirability function using SN ratio which can be optimized by univariate technique is proposed and a parameter design procedure to achieve the best balance among several different response variables is developed We reanalyze two existing case studies by the proposed method and compare these results with ones by the sum of SN ratios and the expected weighted loss.

• Journal of Construction Engineering and Project Management
• /
• 제2권1호
• /
• pp.1-4
• /
• 2012

The importance of project performance management as an alternative for solving problems is rising, which are followed by the hardships of managing construction project in the construction industry. This research classifies and applies the improvements made by the operator's work, in order to apply factors of success on the construction project, as performance management factors. In addition, in order to predict the results reflecting the project characteristic of performance management factor un-improvable by the operator in the initial stage of construction, the effect of project characteristic to the performance was drawn by performance difficulty. Also, in order to improve the predicted performance, researches on setting valid best practices according to the performance territory through a correlation analysis between the best practices improvable through the operator's work, and the performance was made.

• 수산해양교육연구
• /
• 제27권1호
• /
• pp.1-12
• /
• 2015

This article starts with a review of the system characteristic(easiness, flexibility, reliability) and individual characteristic(self-efficacy, achievement motive, computer ability) through education satisfaction especially in relation to the education performance(perceived usefulness, educatee value). We found that all variables significantly affect the education satisfaction, but only computerized ability doesn't significantly affect the education satisfaction. Education satisfaction significantly affect the education performance. This paper suggests that the followings; first, response time of systems is valuable factor in KcLep. Second, self-efficacy and achievement motive are more important then computer ability in KcLep educatee. Finally, software developer and teacher always think about rapid response time of systems and exchange of data for the education performance in KcLep.

• 복식문화연구
• /
• 제18권1호
• /
• pp.1-12
• /
• 2010

This study diagnosed difference of preference about demand performance with design of men's suit according to demographic characteristic and figured out Needs of adult man consumers for men's suit. This study is survey research. In order to collect data, a questionnaire was used. To analyze the collected data, fact analysis, $\chi^2$, ANOVA, Duncan's multiple comparisons and the rest were carried out with using SPSS 14.0. Result of this study could get as following. According to silhouette and color, there was difference to age, attainments in scholarship and preference according to job. Also young people preferred fitted-silhouette and in occasion of color, all of them preferred best black. It was no difference according to demographic characteristic in preferring pattern but preferred best solid on the whole. Demand performance of men's suit appeared by five main causes of design, practicality, comfort, appearance appropriateness, another person awareness and functional materials. And most main causes showed difference according to demographic characteristic.

• 한국항공우주학회지
• /
• 제42권2호
• /
• pp.144-149
• /
• 2014

우주발사체 자세제어용 하이드라진 추력기의 추력실 특성길이($L^*$) 변화에 따른 연소성능을 확인하기 위해 개발모델 추력기에 대한 지상연소시험을 수행하였다. 각각의 추력기에 대한 성능특성이 추진제 주입압력 2.41 MPa (350 psia)에서의 정상상태 추력, 비추력, 응답특성 및 특성속도 등과 같은 성능변수로 분석되었다. 시험결과, 표준모델 대비 추력실 특성길이의 증가와 감소에 따라 특성속도 및 비추력성능이 공히 감소하였던 바, 표준모델의 추력실 형상이 요구성능에 대하여 가장 적합하게 설계되었다는 사실이 확인되었다.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.59-62
• /
• 2012

This test method covers a procedure for measuring particle removal characteristic of equipment fan filter unit(EFFU) installed inside of semiconductor process equipments, FPD manufacturing equipments and so on. Since EFFU is a combination of air filter and the assembly of fan, motor and frame, the integrity of these parts is very important for the performance of EFFU. So a conventional particle removal test method for air filters is not suitable for EFFU particle removal performance. This test method defines an evaluation method for EFFU which is installed inside an enclosed space to remove particles that are generated inside process equipment. The particle removal performance of EFFUs is usually depending on the performance of filter media and air flow rate. To understand a performance of an EFFU, the filter media characteristic, air flow rate and the integrity of EFFU parts should be considered simultaneously. This test method is intended to demonstrate the system performance of an EFFU and successfully evaluated EFFU performance characteristics.

• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2022

In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effect on the aerosol generation characteristics. The product of these three parameters was set as a characteristic parameter and particle generation characteristics according to the change of the characteristic parameter were observed. As a result, it was confirmed that the input amount of test particles and beads was not suitable as a characteristic parameter and a characteristic parameter expressed as a product of the mass mixing ratio and the air flowrate was newly defined. When the new characteristic parameter is applied, it can be confirmed that the total amount of particles generated from the particle generator is a function of the characteristic parameter. As a result of measuring the amount of particle generation by adjusting the characteristic parameter, it was confirmed that the performance required for the test particle generator for the field inspection equipment of PM-2.5 sensors could be satisfied.