• YAKHAK HOEJI
• /
• v.14 no.3_4
• /
• pp.45-50
• /
• 1970

Anti-infalmmatory action of p-methoxycinnamic acid (p-MCA) was investigated. p-MCA showed a significant decrease in carrageenin and acetic acid induced edema of the rat hind paw, and increased capillary permeability by anaphylaxis and chemical mediators of pontamine sky blue in the mouse peritoneal cavity. It, however, showed only weak inhibitory effect on cotton pellet-induced granuloma formation of the rat.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.709-710
• /
• 2002

Cancer angiogenesis is simulated using a two dimensional model. Governing equation of angiogenesis is a TAE (Tumor angiogenesis factor) conservation equation in time and space. A stochastic process model is utilized to simulate vessel formation, proliferation, and migration to a cancer pellet. Numerical results are presented especially in case of growing cancer.

• YAKHAK HOEJI
• /
• v.31 no.3
• /
• pp.154-163
• /
• 1987

Daidzein and its methyl derivatives were synthesized and their anti-inflammatory activities were examined. Daidzein suppressed the carrageenin-induced edema, but its methyl derivatives showed decrease or abolition of the anti-inflammatory effect. Daidzein did not significantly suppress the complete Freund's adjuvant-induced arthritis, and the mixed phlogistics (histamine+serotonin)-induced edema. Daidzein inhibited the leukocyte emigration and protein exudation when it was administered into the CMC pouch at low doses (5,25mg/pouch). Daidzein significantly suppressed the cotton-pellet granuloma formation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.203-220
• /
• 1989

Ever since the expression of new tumor-specific antigens was reported during malignant transformation, studies on separation, purification and characterization of these proteins have been so activated recently. Following experiment was performed to observe tumor-specific antigens by implanting DMBA pellet into submaxillary gland of rat for inducing salivary gland tumor. After dividing 280 rats into 2 groups, in control group, sham operation was performed on right submaxillary gland and, in experimental group, DMBA pellet (5mg) was implanted into right submaxillary gland. Then proteins from excised submaxillary gland by killing 10 rats every two weeks for 28 weeks were extracted with 3M KCl, and SDS-PAGE and PAS-staining were carried out for biochemical examination. The obtained results were summarized as follows; 1) At 12th week since implantation of DMBA pellet, tumor mass formation was inspected. And dysplasia at 6th week and invasive epidermoid carcinoma at 10th week were observed by microscope. 2) In control group, the weight ratio of both submaxillary glands had no any change, however, in experimental group, the ratio was increased remarkably. And at 28th week after DMBA implantation, there was more than 15 times of differences in weight between control and experimental group. 3) There was no DMBA remnant after 22nd experimental week. 4) In the SDS-PAGE, high molecular protein bands (more than 100 kd) were appeared much, and new prominent protein bands (66, 48, 41.5, 39, 37, 37.5 kd) were appeared after 4th week since DMBA implantation. However, 38, 27, 22kd protein bands were disappeared. 5) In PAS-staining, high molecular proteins were proteins were all glycoproteins and 37.5kd protein was proved as to be glycoprotein. And 38kd glycoprotein was disappeared after 4th week since DMBA implantation.

• Advances in Traditional Medicine
• /
• v.8 no.2
• /
• pp.196-203
• /
• 2008

The methanol extract of the root of Artanema sesamoides Family Scrophuilariaceae (MEAS) was investigated for possible analgesic and anti-inflammatory effects in animals. Three models were used to study the extract effects on nociception, which were acetic acid-induced writhing response, hot-plate method and the tail flick test in mice. The antiinflammatory effects were evaluated using carrageenan, dextran, histamine and serotonin induced rat paw oedema (acute) and cotton pellet induced granuloma (chronic) models in rats. Results of the study revealed that the extract exhibited significant (P < 0.001) analgesic effect at a dose of 50, 100 and 200 mg/kg b.w p.o in mice in all the models. In acute model, the MEAS also exhibited significant (P < 0.001) antiinflammatory effect in all the above mentioned doses. In chronic model (cotton pellet induced granuloma) the MEAS 200 mg/kg and indomethacin 10 mg/kg showed that inhibition of granuloma formation 25.0% and 47.7% respectively (P < 0.001). The MEAS and indomethacin were effectively preventing the transudation of the fluid. Thus, the present study revealed that the methanol extract of the root of Artanema sesamoides exhibited significant analgesic and antiinflammatory activity.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.246-252
• /
• 2018

A series of simulated reactivity-initiated accident (RIA) tests on irradiated fully recrystallized boiling water reactor Zircaloy-2 cladding has been performed by means of the expansion-due-to-compression (EDC) test method. The EDC method reproduces fuel pellet-clad mechanical interaction (PCMI) conditions for the cladding during RIA transients with respect to temperature and loading rates by out-of-pile mechanical testing. The tested materials had a large variation in burnup and hydrogen content (up to 907 wppm). The results of the EDC tests showed variation in the PCMI resistance of claddings with similar burnup and hydrogen content, making it difficult to clearly identify ductile-to-brittle transition temperatures. The EDC-tested samples of the present and previous work were investigated by light optical and scanning electron microscopy to study the influence of factors such as azimuthal variation of the Zr-hydrides and the presence of hydride rims and radially oriented hydrides. Two main characteristics were identified in samples with low ductility with respect to hydrogen content and test temperature: hydride rims and radial hydrides at the cladding outer surface. Crack propagation and failure modes were also studied, showing two general modes of crack propagation depending on distribution and amount of radially oriented hydrides. It was concluded that the PCMI resistance of irradiated cladding under normal conditions with homogenously distributed circumferential hydrides is high, with good margin to the RIA failure limits. To further improve safety, focus should be on conditions causing nonfavorable hydride distribution, such as hydride reorientation and formation of hydride blisters at the cladding outer surface.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1354-1358
• /
• 2005

Nano- and microstructured indium nitride crystals were synthesized by the reaction of indium oxide ($In_2O_3$) powder and its pellet with ammonia in the temperature range 580-700 ${^{\circ}C}$. The degree of nitridation of $In_2O_3$ to InN was very sensitive to the nitridation temperature. The formation of zero- to three-dimensional structured InN crystals demonstrated that $In_2O_3$ is nitridated to InN via two dominant parallel routes (solid ($In_2O_3$)-to-solid (InN) and gas ($In_2O$)-to-solid (InN)). The growth of InN crystals with such various morphologies was explained by the vapor-solid (VS) mechanism where the degree of supersaturation of In vapor determines the growth morphology and the vapor was mainly by the reaction of $In_2O$ with ammonia and partially by sublimation of solid InN. The pellet method was proven to be useful to obtain homogeneous InN nanowires.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.

• Nuclear Engineering and Technology
• /
• v.30 no.6
• /
• pp.541-554
• /
• 1998

A computer code COSMOS has been developed based on the CARO-D5 for the thermal analysis of LWR UO$_2$ and MOX fuel rod under steady-state and transient operating conditions. The main purpose of the COSMOS, which considers high turnup characteristics such as thermal conductivity degradation with turnup and rim formation at the outer part of fuel pellet, is to calculate temperature profile across fuel pellet and fission gas release up to high burnup. A new mechanistic fission gas release model developed based on physical processes has been incorporated into the code. In addition, the features of MOX fuel such as change in themo-mechanical properties and the effect of microscopic heterogeneity on fission gas release have been also taken into account so that it can be applied to MOX fuel. Another important feature of the COSMOS is that it can analyze fuel segment refabricated from base irradiated fuel rods in commercial reactors. This feature makes it possible to analyze database obtained from international projects such as the MALDEN and RISO, many of which were collected from refabricated fuel segments. The capacity of the COSMOS has been tested with some number of experimental results obtained from the HALDEN, RISO and FIGARO programs. Comparison with the measured data indicates that, although the COSMOS gives reasonable agreement, the current models need to be improved. This work is being performed using database available from the OECD/NEA.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.119-125
• /
• 1995

The morphology of fungal growth, which is an important variable for separability and rheological property of fermented medium, was quantified with fractal geometry Fractal dimensions were determined for submerged growth of two industrially important fungi, Aspergillus niger and Aspergillus oruzae. The tendency of pellet formation was related to the fractal dimension of fungi.