• 방송공학회논문지
• /
• 제21권4호
• /
• pp.472-483
• /
• 2016

본 논문에서는 MC-FRUC(Motion Compensated Frame Rate Up-Conversion) 에서 사용될 수 있는 주파수 영역에서의 블로킹 현상(blocking artifacts) 검출 알고리즘을 제안한다. MC-FRUC 알고리즘은 블록 단위로 움직임 벡터를 계산하여 움직임 보상을 수행함으로써 블록 경계선 주변에서 블로킹 현상이 발생할 수 있다. 본 논문에서는 효율적인 블로킹 현상 검출을 위해 보간된 영상(interpolated frame)의 주파수 성분을 분석하여 블록경계에서 블록킹 현상을 감소시킨다. 실험결과에서 제안된 알고리즘이 기존의 FRUC 방법보다 더 나은 주관적 화질을 보인다. 제안한 방법은 또한 기존의 BDMC(Bi-Directional Motion Compensation) 대비 평균 약 0.45 dB PSNR(Peak Signal to Noise Ratio)이 향상되었다.

• 한국의류학회지
• /
• 제47권3호
• /
• pp.577-592
• /
• 2023

In this study, nanofiber-based textile sensors were developed for motion detection and monitoring. Poly(vinylidene fluoride) (PVDF) nanofibers containing zinc oxide (ZnO) nanoparticles and silver nanowires (AgNW) were fabricated using electrospinning. PVDF was chosen as a piezoelectric polymer, zinc oxide as a piezoelectric ceramic, and AgNW as a metal to improve electric conductivity. The PVDF/ZnO/AgNW nanocomposite fibers were used to develop a textile sensor, which was then incorporated into an elbow band to develop a wearable smart band. Changes in the output voltage and peak-to-peak voltage (V_p-p) generated by the joint's flexion and extension were investigated using a dummy elbow. The β-phase crystallinity of pure PVDF nanofibers was 58% when analyzed using Fourier transform infrared spectroscopy; however, the β-phase crystallinity increased to 70% in PVDF nanofibers containing ZnO and to 78% in PVDF nanocomposite fibers containing both ZnO and AgNW. The textile sensor's output voltage values varied with joint-bending angle; upon increasing the joint angle from 45° to 90° to 150°, the V_p-p value increased from 0.321 V_p-p to 0.542 V_p-p to 0.660 V_p-p respectively. This suggests that the textile sensor can be used to detect and monitor body movements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.583-585
• /
• 2004

In this paper we will deal with a calibration method for low cost motion capture system using psd(position sensitive detection) optical sensor. To measure the incident direction of the light from LED emitted marker, the PSD is used the output current ratio on the electrode of PSD is proportional with the incident position of the light focused by lens. In order to defect the direction of the light, the current output is converted into digital voltage value by opamp circuits peak detector and AD converter with the digital value the incident position is measured. Unfortunately, due to the non-linearly problem of the circuit poor position accuracy is shown. To overcome such problems, we compensated the non-linearly by using least-square fitting method. After compensated the non-linearly in the circuit, the system showed more enhanced position accuracy.

• 한국방재안전학회논문집
• /
• 제11권2호
• /
• pp.53-60
• /
• 2018

본 연구에서는 강판에 발생한 국부적인 손상의 진단을 위해 강자성의 연속체 구조물에 적합한 비파괴진단 기법인 누설자속 기법을 적용하였다. 강판시편의 두께 변화에 따른 누설자속 기반 진단 기법의 민감도를 분석하기 위해 각각 다른 두께를 가지는 몇 가지의 강판시편을 준비하였고, 각각의 시편에 3가지 깊이의 인공결함을 가공하였다. 홀센서와 자화요크를 이용하여 일정한 자화밀도를 가지는 누설자속 센서헤드를 제작하여 강판시편으로부터 누설자속 신호를 계측하였다. 센서헤드로부터 수집된 자속신호의 품질향상을 위해 일련의 신호처리 과정을 거쳤으며, 각 손상지점으로부터 계측된 누설자속 신호의 확인을 통해 국부손상 감지의 가능성을 확인하였다. 강판두께에 따른 누설자속 기법의 손상감지 민감도의 분석을 위해 각각 다른 두께의 강판시편으로부터 검출된 MFL 신호에서 P-P value를 정량적으로 추출하였고 그 값을 비교 분석 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3357-3361
• /
• 2013

Alumina microfibers with porous structures were prepared through hydrothermal reaction, and then used to modify the surface of carbon paste electrode (CPE). After modification with alumina microfibers, the electrochemical activity of CPE was found to be greatly improved. On the surface of alumina microfibers-modified CPE, the oxidation peak current of salvianolic acid B, a main bioactive compound in Danshen with anti-oxidative and anti-inflammatory effects, was remarkably increased compared with that on the bare CPE surface. The influences of pH value, amount of alumina microfibers and accumulation time were studied. Based on the strong signal amplification effects of alumina microfibers, a novel electrochemical method was developed for the detection of salvianolic acid B. The linear range was from 5 ${\mu}gL^{-1}$ to 0.3 mg $L^{-1}$, and the detection limit was 2 ${\mu}gL^{-1}$ (2.78 nM) after 1-min accumulation. The new method was successfully used to detect salvianolic acid B in ShuangDan oral liquid samples, and the recovery was over the range from 97.4% to 102.9%.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.924-931
• /
• 1999

Most conventional protection relays are based on processing information in the spectrum that is close to or at power frequency. It is, however, widely known that faults on transmission lines produce frequency components of a wide range. High frequency signals caused by sudden changes in system voltage that occurs in the immediate post-fault period are generally outside the bandwidth of receptibility of most protection scheme. In this respect, a specially designed stack tuner is connected to the coupling capacitor of CVT, in order to capture the high frequency signals. Digital signal processing is then applied to the captured information to determine whether the fault is inside or outside the protected zone, and to discriminate the fault type. In this paper, modal transform is not applied to fault generated signals, because signals which are converted by modal transform are not have an information of each phase any longer. Instead, using peak voltage value of data windows is able to discriminate fault type. The paper concludes by presenting fault detection and discrimination of various faults on transmission line which are based on extensive simulation studies carried out on a typical 154kV Korean transmission line, using the EMTP software.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.475-490
• /
• 2019

The detection of structural damage without a priori information on the healthy state is challenging. In order to address the issue, the study presents a baseline-free approach to detect damage in beam structures based on an actual influence line. In particular, a multi-segment function-fitting calculation is developed to extract the actual deflection influence line (DIL) of a damaged beam from bridge responses due to a passing vehicle. An intact basis function based on the measurement position is introduced. The damage index is defined as the difference between the actual DIL and a constructed function related to the intact basis, and the damage location is indicated based on the local peak value of the damage index curve. The damage basis function is formulated by using the detected damage location. Based on the intact and damage basis functions, damage severity is quantified by fitting the actual DIL using the least-square calculation. Both numerical and experimental examples are provided to investigate the feasibility of the proposed method. The results indicate that the present baseline-free approach is effective in detecting the damage of beam structures.

• 대한의용생체공학회:의공학회지
• /
• 제44권2호
• /
• pp.118-124
• /
• 2023

Many recent studies have reported that the quality of input learning data was vital to the detection of regions of interest. However, due to a lack of research on the quality of learning data on lesion detetcting using gastroscopy, we aimed to quantify the impact of quality difference in endoscopic images to lesion detection models using Image Quality Assessment (IQA) algorithms. Through IQA methods such as BRISQUE (Blind/Referenceless Image Spatial Quality Evaluation), Laplacian Score, and PSNR (Peak Signal-To-Noise) algorithm on 430 sheets of high quality data (HQD) and 430 sheets of low quality data (PQD), we showed that there were significant differences between high and low quality images in lesion detecting through BRISQUE and Laplacian scores (p<0.05). The PSNR value showed 10.62±1.76 dB on average, illustrating the lower lesion detection performance of PQD than HQD. In addition, F1-Score of HQD showed higher detection performance at 77.42±3.36% while F1-Score of PQD showed 66.82±9.07%. Through this study, we hope to contribute to future gastroscopy lesion detection assistance systems that involve IQA algorithms by emphasizing the importance of using high quality data over lower quality data.

• 대한의생명과학회지
• /
• 제6권2호
• /
• pp.93-100
• /
• 2000

호르텐스극구흡충 피낭유충을 흰쥐 및 마우스에 경구 감염시킨 후 실험동물의 혈청 및 장액에 대한 IgA 및 IgE 항체가 변화 추이를 ELISA방법으로 비교 분석하였다. 감염 흰쥐에서 혈청의 경우 IgA와 IgE항체가를 대조군과 비교해 볼 때 유의한 차이를 나타내지 않았다. 그러나 장액의 IgA항체가는 감염 후부터 계속 증가하여 8주에서 최고치 (0.47$\pm$0.11)를 나타냈다. 감염 흰쥐에서 충체 회수율은 8주까지 계속 충체 수가 감소하는 경향을 보였는데 특히, 장액의 IgA 항체가 성적이 최고치를 나타낸 기간에 유의한 감소 성적을 나타냈다 감염 마우스 혈청에서의 IgA항체가는 감염 기간동안 계속적으로 증가하여 감염 8주에서 최고치 (0.45$\pm$0.01)를 보였으며, IgE의 경우는 감염 후부터 7주까지 증가하여 7주에서 그 최고치 (0.23$\pm$0.02)를 보였으나 그 이후 다시 감소되었다. 장액의 경우 IgA 항체가는 감염 후부터 증가하여 8주에서 최고치 (0.14$\pm$0.01)를 보였으며, 이는 혈청 IgA의 항체가 변화와 유사한 경향을 보였다. 감염 마우스의 충체 회수율은 감염 후부터 계속적으로 감소하였으며 7주와 8주에서 유의한 감소를 보였는데 (p＜0.05)이것은 장액에서의 IgA와 IgE, 혈청에서의 IgA의 항체가 최고치를 나타낸 기간과 일치하였다. 이상의 결과에서 호르텐스극구흡충 감염 마우스에 있어서, IgA 및 IgE 항체가의 유무는 충체의 배출(expulsion)에 일부 연관되어 있음을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.559-568
• /
• 2017

Harmonic/inter-harmonic detection and analysis is an important issue in power system signal processing. This paper proposes a fast algorithm based on matching pursuit (MP) sparse signal decomposition, which can be employed to extract the harmonic or inter-harmonic components of a distorted electric voltage/current signal. In the MP iterations, the method extracts harmonic/inter-harmonic components in order according to the spectrum peak. The Fast Fourier Transform (FFT) and nonlinear optimization techniques are used in the decomposition to realize fast and accurate estimation of the parameters. First, the frequency estimation value corresponding to the maxim spectrum peak in the present residual is obtained, and the phase corresponding to this frequency is searched in discrete sinusoids dictionary. Then the frequency and phase estimations are taken as initial values of the unknown parameters for Nelder-Mead to acquire the optimized parameters. Finally, the duration time of the disturbance is determined by comparing the inner products, and the amplitude is achieved according to the matching expression of the harmonic or inter-harmonic. Simulations and actual signal tests are performed to illustrate the effectiveness and feasibility of the proposed method.