• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1441-1447
• /
• 2014

A robust new algorithm for R wave detection named for Multiscale-based Peak Detection(MSPD) is assessed in this paper using MIT/BIH Arrhythmia Database. MSPD algorithm is based on a matrix composed of local maximum and find R peaks using result of standard deviation in the matrix. Furthermore, By reducing needless procedure of proposed algorithm, improve algorithm ability to detect R peak efficiently. And algorithm performance is assessed according to detection rates about various arrhythmia database.

• Journal of Magnetics
• /
• v.17 no.3
• /
• pp.206-209
• /
• 2012

Peak interval for reversible permeability is presented for nondestructively evaluating the remanent life of 1Cr-0.5Mo steel. The method to measure the peak interval of reversible permeability is based on the value of reversible permeability is the same as the differential value of the hysteresis loop. The measurement principle is based on the first harmonics voltage induced in a sensing coil using a lock-in amplifier tuned to a frequency of the exciting voltage. Results obtained for the peak interval of reversible permeability and Rockwell hardness on the aged samples decrease as aging time and the Larson-Miller parameter increase. We could estimate the remanent life of 1Cr-0.5Mo steel by using the relationship between the peak interval of reversible permeability and the Larson-Miller parameter, nondestructively.

• Wind and Structures
• /
• v.36 no.1
• /
• pp.15-29
• /
• 2023

To better estimate the non-Gaussian extreme wind pressures for high-rise buildings, a data-driven revised Hermitetype peak factor estimation model is proposed in this papar. Subsequently, a comparative study on three types of methods, such as Hermite-type models, short-time estimate Gumbel method (STE), and new translated-peak-process method (TPP) is carried out. The investigations show that the proposed Hermite-type peak factor has better accuracy and applicability than the other Hermite-type models, and its absolute accuracy is slightly inferior to the STE and new TPP methods for non-Gaussian wind pressures by comparing with the observed values. Moreover, these methods generally overestimate the Gaussian wind pressures especially the STE.

• Journal of Korean Academy of Nursing
• /
• v.39 no.4
• /
• pp.584-593
• /
• 2009

Purpose: The purpose of this study was to investigate the effect of stretching, muscle strengthening, and walking exercise on the cardiopulmonary function and health-related quality of life in hemodialysis patients. Methods: Twenty-one patients in the intervention and the control group participated in the exercise respectively on maintenance hemodialysis at four university hospitals. The exercise was composed of 20 to 60 min per session, 3 sessions a week for 12 weeks. The effect of exercise was assessed by cardiopulmonary function (peak oxygen uptake, peak ventilation, peak respiration rate, maximal heart rate, and exercise duration) using a cycle ergometer. Grip strength was measured by dynamometer, and flexibility was measured by sit and reach measuring instrument. Health-related quality of life was measured using Medical Outcomes Study Short Form-36. Results: Peak oxygen uptake, peak ventilation, peak respiration rate, exercise duration, grip strength, flexibility, and physical component scale were significantly improved in the intervention group after 12 week's exercise compared to the control group. Conclusion: These findings indicate the exercise can improve cardiopulmonary function, grip strength, flexibility, and physical component scale of health-related quality of life in hemodialysis patients.

• Journal of the Korea society of information convergence
• /
• v.5 no.2
• /
• pp.49-58
• /
• 2012

Korea has entered into an aging society at an exceptionally high speed. Increasing aged workers give pressure on Korean companies with seniority based pay system with labor costs. The wage peak system has been introduced to Korean companies as an alternative to early retirements. The wage peak system currently adopted in Korea is mainly the aging-limit-security model. But in the future we should actively adopt the employment-extension model. To operate wage peak system successfully, I suggest introduction of the individual wage peak system, development of suitable jobs for the aged, selective application by job classification, incentive graded by performance evaluation, and working hour reduction with the decreased rate of wage.

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.372-378
• /
• 2013

This paper presents an approximate model for computing the peak demand power in a metro railway system. The peak demand of substations can be calculated using the current vector iteration method. But the existing method requires many repeated calculations to determine the peak demand power, which makes it difficult to apply to the real-time peak power control problem. In this paper, we assume that none of the conditions vary except source impedance and make an approximate model for rapid calculation based on changes in the impedance of the power substation. The proposed model result is approximately the same as the existing model, which is demonstrated through simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.518-524
• /
• 2001

We report the current limiting properties of superconducting fault current limiters (SFCL). Our SFCL was patterned in a spiral type on a YB $a_2$C $u_3$$O_{7-x}$(YBCO) film deposited using rf sputtering techniques and was coated with a gold shunt layer in order to disperse the heat generated at hot spots in the YBCO film. Current increased up to 13.5 $A_{peak}$ at 60 Hz for the voltage of 13 $V_{peak}$, which is the minimum quench point, and increased up to 17.6 $A_{peak}$ at 60 Hz fo the voltage fo 141.4 $V_{peak}$. The quench completion time was 5 msec at 13 $V_{peak}$ and 4 msec at 141. $V_{peak}$ respectively. we think that this architecture using spiral-type SFCL can be useful for the protection of the power delivery systems from fault currents.s. currents.s.

• Water for future
• /
• v.25 no.3
• /
• pp.115-124
• /
• 1992

The peak flood discharge at a downstream station and the flood travel time between a pair of dams due to a specific flood release from the upper reservoir are computed using a hydraulic river channel routing method. The study covered the whole reservoir system in the Han River. The computed peak flood discharges and the travel times between dams were correlated with the duration and the magnitude of flood release rate at the upstream reservoir, and hence a multiple regression model is proposed for each river reach between a pair of dams. The peak flood discharge at a downstream location can be converted to the peak flood stage by rating curve. Hence, the proposed regression model could be used to forecast the peak flood stage at a downstream location and the flood travel time between dams using the information on the flood release rate and duration from the upper dam.

• The Journal of Korean Physical Therapy
• /
• v.27 no.6
• /
• pp.434-438
• /
• 2015

Purpose: The purpose of this study was to determine the effects of calcaneal taping on peak plantar pressure of rearfoot and forefoot while walking. Methods: Fifteen healthy subjects with normal feet participated in this study. Inclusion criteria were as follows: (1) no disturbance of gait and foot pain, (2) normal range of motion of ankle joint, (3) no foot deformity. Pedoscan was used for recording of plantar pressure data during walking. The participants walked along a 12-m walkway before and after application of calcaneal taping. The plantar pressure gait was measured 3 times under barefoot and calcaneal taping conditions randomly at a speed practiced with the metronome during gait. The peak plantar pressure data were calculated for medial and lateral areas of the rearfoot and forefoot. The paired t-test was used to determine significant differences in peak plantar pressure of rearfoot and forefoot before and after application of calcaneal taping. A p-value less than 0.05 was accepted as significant. Results: The calcaneal taping resulted in statistically significant decreases in peak plantar pressure of the rearfoot (medial side: p=0.03; lateral side: p=0.01). However, there were no significant changes in peak plantar pressure of the forefoot (medial side: p=0.45; lateral side: p=0.40). Conclusion: The calcaneal taping is recommended to reduce plantar pressure of the rearfoot in weight-bearing activities in subjects with plantar heel pain caused by atrophy of the fat pad.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.38-40
• /
• 1988

This paper was a study on dielectic characteristics of polypropylen film which were annealled in air and qunched in nitorgen after aging for 5[Hr]. Dielectric characteristics of specimen were measured in temperature of the range of 15-120[$^{\circ}C$], and in frequency of the range of $30-1{\times}10^6$[Hz.] As the result, for dielectric relaxation $\beta$-peak was observed in 20[$^{\circ}C$], and $\alpha$-peak was observed in 90[$^{\circ}C$]. Also, it was explained that $\alpha$-peak attributed due to armorphous region and $\beta$-peak attributed due to crystalline region and activation energy from dielectric loss spectra was obtained 34.5[kcal/mole] for $\alpha$-peak and 80.5[Kcal/mole] for $\beta$-peak, respectively.