• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.475-480
• /
• 2001

The purpose of this study is to evaluate the validity of seismic performance evaluation using static analysis. For this purpose, Ordinary Moment Resisting Steel Frames(OMRSF) for different heights(3, 6 ,9, 12 story) and seismic zones(Zone 2A, 2B, 3, 4) were designed in compliance to AISC LRFD 1993 Seismic Provisions and NEHRP 1994 Guidelines. Nonlinear Static Procedure(NSP) and Nonlinear Dynamic Procedure(NDP) with a set of ground motion record were used to evaluate seismic demands in OMRSFs. Using the DRAIN-2DX program, this study compares peak displacement demands(Target Displacement) proposed by FEMA 273 with the peak roof displacement demands obtained from the inelastic time history analyses. Based on the results, the validity of procedure of seismic demand evaluation using Target Displacement is discussed.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.

• 대한전기학회논문지
• /
• 제36권2호
• /
• pp.73-79
• /
• 1987

This paper describes a new algorithm to evaluate the production cost for a generation system including energy-limited hydroelectric plants. The algorithm is based upon the analytical production costing model developed under the assumption of Gaussian probabilistic distribution of random load fluctuations and plant outages. Hydro operation and pumped storage operation have been dealt with in the previous papers using the concept of peak-shaving operation. In this paper, the hydro problem is solved by using a new version of the gradient projection method that treats the upper / lower bounds of variables saparately and uses a specified initial active constraint set. Accuracy and validity of the algorithm are demonstrated by comparing the result with that of the peak-shaving model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1131-1133
• /
• 1996

In this paper, we consider the mixed $L_1/H_{\infty}$ problems of finding internally stabilizing controllers which minimize the peak-to-peak gain of a certain closed loop transfer function with $H_{\infty}$-norm constraint on other closed loop transfer function(or vise versa). This problem is a useful framework for designing a controller with the norm constraints upon time and frequency domain. We formulate the mixed $L_1/H_{\infty}$ problem as LMI problems by using the reachable set. This paper offers the sufficient condition for the existence of suboptimal state feedback controller, and shows that suboptimal solution can be obtained by solving a finite-dimensional convex optimization and a line search.

• Restorative Dentistry and Endodontics
• /
• 제28권4호
• /
• pp.334-340
• /
• 2003

This study was performed to evaluate the actual temperature rise on the surface of Buchanan plugger using thermocouple. The heat carrier system 'System B Heatsource'(Model 1005, Analytic Technologies, Redmond, WA, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200^{\circ}C on digital display and the power level on it was set to 10. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 mm increments from the tip to the 4 mm length of shank. The heat control spring was touched for 5 seconds. and the temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01 using Data Logger. The data were statistically analyzed by one-way ANOVA. The results were as follows. 1. The position at which the temperature peaked was approximately at 1~2 mm far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was $215.25{\pm}2.28^{\circ}C$ in F plugger. $185.94{\pm}2.19^{\circ}C$ in FM plugger, $169.51{\pm}9.12^{\circ}C$ in M plugger, and 160.79{\pm}1.27^{\circ}C in ML plugger and the peak temperature was highest in F plugger and followed by. in descending order. FM plugger. M plugger. ML plugger showed the lowest peak temperature (p<0.01). 3. The temperature on the plugger was decreased with the increase of touching time. This results suggest that the actual temperature on the surface of the pluggers does not correlate well with the temperature set on digital display. Heat concentrates around the tip. The larger plugger reveals lower temperature rise relatively.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• 한국식품과학회지
• /
• 제28권6호
• /
• pp.1171-1176
• /
• 1996

레토르트 살균처리시 일어나는 계육 모형식품의 휘발성분 변화를 GC 및 GC-MS로 분석한 후 그 데이터를 활용하여 통계분석을 행하였다. 먼저, 분산분석으로 통계적으로 유의한 42개 peak를 선택하였으며 이를 독립변수로 하여 다변량 통계분석을 실시하였다. 단계적 판별분석법으로 두 시료집단의 차이를 명확히 구분하는 GC peak로서 2-heptanone 등 8개 peak를 순차적으로 얻었다. 이어서 선택된 8개 peak를 독립변수로 주성분 분석을 한 결과, 3개 주성분으로, 96.1%의 높은 판별이 가능함을 알 수 있었으며, 특히 PC1은 76.5%의 판별이 가능한 것으로 나타났다. 또한, 주성분을 이용한 요인분석(Factor Analysis)을 행하여 8개 peak 상호간의 관계를 검토한 결과 11, 20, 21번 peak는 그 방향성 및 크기가 거의 같았으며, 11, 20, 21번 peak 그룹과 9, 32, 39번 peak 그룹은 방향성이 서로 반대이며 크기도 매우 큰 것으로 밝혀졌다.

• 전자공학회논문지B
• /
• 제30B권12호
• /
• pp.51-58
• /
• 1993

This paper presents a design of the fuzzy decision maker which infers set value for fuel rate in the rotary kiln of making CaO. The fuzzy decision maker proposed are divided into two groups whose functions are different each other. The one operates when production demand is constant. The other deals with the status of varying production demand. We have chosen several variables used for composing condition and action part by investigating ingerent features of the rotary kiln and skilled operators`manual method of inferring fuel rate. Membership function of each variable was designed by analyzing experimental data and field data collected during two months. On-line operation with fuzzy rules suggested was done safely like human operators' action.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 춘계학술대회
• /
• pp.21-24
• /
• 1990

This paper presents a new algorithm for P-wave detection in the ECG signal, we get the peak, onset and offset point by using significant point extraction algorithm with 5-point derivative. To these set of extracted significant points, we apply amplitude and duration threshold criterion. we define the set of significant point meeting the criterion as P-wave candidate. Then P-wave candidate is classified through match-process with template. The template with maximum number or P-wave candidate is selected to be the P-wave.

• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.158-163
• /
• 2008

The MB-OFDM based UWB communication system is a personal area network specification aiming to provide 480Mbps peak data rate over 528 MHz spectrum. As the corresponding baseband modem operates at high clock rate, its complexity should be optimized for low power consumption. A set of modem design parameters is suggested including the AD bit width, the clipping level and the quantization level at the Viterbi decoder input as well as the trace-back depth of the Viterbi decoder. The data throughput is used to evaluate the performance of the receiver and a recommended set of design parameter values is presented to aid efficient modem implementation.