• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.19-31
• /
• 2006

이 연구의 목적은 각 분절의 마커세트와 무릎관절 중심 정의가 3차원 무릎 관절각을 산출하는데 얼마나 민감하게 영향을 미치는지를 연구하였다. 자료수집은 1명을 실험대상자로 하여 두 가지 형태의 각기 다른 분절의 정의와 무릎관절의 중심을 나타내는 반사마커들을 동시에 오른쪽 하지에 부착시켜 실험을 실시하였다. 실험대상자의 달리기동작 중 좌측으로 45도 방향전환동작의 지지기를 분석하였다. 이를 위해서 8대의 고속카메라들을 이용하였고 달리기속도는 4m/$sec{\pm}(10%)$로 통제하였다. 하지분절의 발분절에는 하나의 마커세트를, 정강이와 대퇴분절에는 두 가지의 다른 마커세트들을 부착시켰다. 발분절에는 3개의 마커를 신발의 뒷부분에 부착하였고 정강이분절을 정의하기 위하여 첫 번째 마커세트는 경골을 중심으로 3개의 마커들을 두 번째 마커세트는 비골을 중심으로 3개의 마커를 부착하였다. 대퇴분절의 마커세트를 정의하기 위하여 첫 번째 마커세트에는 대퇴골을 중심으로 3개의 마커를 두 번째 마커세트에는 대퇴근육을 중심으로 3개의 마커들을 부착하였다. 무릎관절중심을 정의하는데 두 가지 다른 정의가 적용되었다. 첫 번째 무릎중심을 무릎의 내측과 외측의 마커들을 통해 두 마커의 중심을 무릎관절의 중심으로 정의하였다. 두 번째 무릎중심정의는 무릎의 외측부분과 슬개골의 중심에 부착된 마커들로부터의 교차점을 무릎관절중심으로 산출하였다. 무릎관절의 각도를 산출하기 위해서 JCS(Joint Coordinate System)의 정의가 적용되었고 연구의 결과는 다음과 같았다. 두 가지의 다른 분절마커세트 사이에서 무릎의 신전(extension)과 굴곡(flexion)은 유사한 형태를 나타냈으며 최대 무릎굴곡(peak knee flexion)각에서 $4.746^{\circ}$의 차이를 나타냈다. 다른 분절마커세트 사이의 회전(rotation)각과 내전(adduction)/외전(abduction)에서는 서로 다른 형태를 나타내었고, 두 마커세트간 최대무릎외측회전(peak knee external rotation)각도에서는 $15.628^{\circ}$의 차이를 나타냈다. 또한, 각 분절마커세트 내에서 두 가지의 다른 무릎관절 중심의 정의가 얼마나 무릎도 산출에 영향을 미치는지를 비교했을 때 무릎의 최대외측회전(peak external rotation)각에서 차이를 나타내었다. 첫 번째 분절마커세트의 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.549^{\circ}$의 차이를 나타냈고, 두 번째 분절마커 세트에서 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.309^{\circ}$의 차이를 나타냈다. 이와 같이 분절을 나타내는 마커세트와 무릎관절중심정의의 형태변화에 따라 무릎간을 계산하는데 있어서 결과가 다르게 산출되었다. 즉, 관절각의 계산이 분절에 부착되는 마커의 정의 혹은 위치에 매우 민감하게 영향을 받았다. 따라서 연구자가 여러 실험대상자들을 대상으로 실험시 마커세트 혹은 마커들을 동일한 위치에 가깝게 부착하는 것이 마커부착으로부터 발생하는 실험오차를 줄일 수 있을 것이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.8
• /
• pp.1156-1164
• /
• 2010

Structured lipids (SLs) were synthesized by enzymatic interesterification with evening primrose oil (EPO) and rice bran oil (RBO) in a batch-type reactor. The interesterification was performed using a water shaker for 24 hr at $55^{\circ}C$. Mixing speed was set at 200 rpm and Lipozyme RM IM (immobilized lipase from Rhizomucor miehei, 10% by weight of total substrates) was used as a biocatalyst. Rice bran oil and evening primrose oil were interesterified with various molar ratios (RBO : EPO, 1:3, 1:4, and 1:5 mol/mol). Reversed-phase high performance liquid chromatography connected with evaporative light-scattering detector was performed to separate the triacylglycerol (TAG) species of SLs. In the fatty acid analysis, $\gamma$-linolenic acid (7.9 mol%), linoleic acid (67.3 mol%) and oleic acid (13.2 mol%) were the most abundant fatty acids in the SLs. During 24 hr reaction, most of the reaction occurred within 3 hr. TAG compositions, tocopherols and phytosterols were also analyzed. In the TAG species analysis, LLL (ECN=42, L=linoleic acid) dramatically decreased when the reaction time increased.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.829-834
• /
• 2011

Lysozyme in egg white functions as bacteriolysis agent and ovalbumin plays a role as antigen in immune system. Egg white analysis methods usually include electrophoresis, gel permeation chromatography and reversed-phase HPLC(RP-HPLC). Among them, RP-HPLC was selected for rapid analysis and C18 column(Agilent, USA) was used as HPLC column. Optimum conditions were searched by changing mobile phase and temperature. Capacity factor and resolution were calculated and compared for various elution conditions. In the isocratic elution, mobile phase volume ratio was changed from 30/70/0.1 to 60/40/0.1(Acetonitrile(ACN)/Distilled water(DW)/Trifluoroacetic acid(TFA)). ACN composition was increased by 10% and temperature was set as $20^{\circ}C$. In the gradient elution, ACN/DW ratio was changed from 10/90 to 60/40 during 20 minute and temperature was varied as 20, 30 and $40^{\circ}C$. In the isocratic elution, three peaks were separated at 50/50/0.1. Lysozyme and ovalbumin were confirmed as first and third peak in three peaks respectively. In the gradient elution, four peaks were separated at $30^{\circ}C$. Lysozyme and ovalbumin were confirmed as first peak and third peak in four peaks respectively.

• Smart Structures and Systems
• /
• v.9 no.3
• /
• pp.253-271
• /
• 2012

Finite element (FE) model updating is a useful tool for global damage detection technique, which identifies the damage of the structure using measured vibration data. This paper presents the application of a finite element model updating method to detect the damage of a small-scale reinforced concrete building structure using measured acceleration data from shaking table tests. An iterative FE model updating strategy using the least-squares solution based on sensitivity of frequency response functions and natural frequencies was provided. In addition, a side constraint to mitigate numerical difficulties associated with ill-conditioning was described. The test structure was subjected to six El Centro 1942 ground motion histories with different Peak Ground Accelerations (PGA) ranging from 0.06 g to 0.5 g, and analytical models corresponding to each stage of the shaking were obtained using the model updating method. Flexural stiffness values of the structural members were chosen as the updating parameters. In model updating at each stage of shaking, the initial values of the parameter were set to those obtained from the previous stage. Severity of damage at each stage of shaking was determined from the change of the updated stiffness values. Results indicated that larger reductions in stiffness values occurred at the slab members than at the wall members, and this was consistent with the observed damage pattern of the test structure.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.2
• /
• pp.224-233
• /
• 2014

In this study, instead of arrowroot starch sesame mook(Gomadoufu) used in the manufacture of expensive sesame mook the quality of the material characteristics and commercialized for to find out the possibility of replacement of other starch, propose. Potato starch RVA analysis was quick pasting temperature $70.3^{\circ}C$, peak viscosity 740 RVU, break down 579.9 final viscosity 433.8, set back 275.7 arrowroot starch than 4.5 times, sweet potato starch than 6.9 fold the highest value showed Japanese sesame results starch (Atarigoma) concentration increased, the measured starch, different kinds of manufacturing quality characteristics of sesame mook tended to increase the moisture content, texture measurements on the hardness and springiness, gumminess and chewiness was gradually decreased. Sesame mook in sensory evaluation, color and aroma, taste, texture and overall-acceptability, sweet potato starch, arrowroot starch 60% addition, 50% added, potato starch 40% group containing most symbols highest was, and the experimental results used in the manufacture of arrowroot starch instead of expensive replacement of other starch is deemed.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.778-788
• /
• 2013

The objective of this study was to investigate the effects and availability of arrowroot powder in making white bread. The characteristics of pasting, farinogram and alveogram of the dough containing arrowroot powder were analyzed. Further, the physicochemical properties of white bread were analyzed by different mixing ratios (0, 3, 5 and 7%) of arrowroot powder during storage periods. When 7% of arrowroot powder was added, the initial pasting temperature of the dough by using a RVA (rapid visco analyzer) was significantly increased. Peak viscosity, holding strength, break down, final viscosity and set back were decreased by increasing added arrowroot powder. With the increasing amounts of arrowroot powder, the values of farinogram and alveogram parameter for the dough showed a tendency to decrement. The texture profile analysis of the white bread revealed that hardness, springiness, cohesiveness and gumminess were increased by adding arrowroot powder and further, the storage time was longer. By increasing the amount of added arrowroot powder, the L value of the white bread was decreased, whereas the a, b value were increased. In the sensory evaluation, the white bread of the control and that of the added 3% arrowroot powder showed the highest preference in total score.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2203-2205
• /
• 2003

KIRAMS-13, the first medical cyclotron developed by domestic technique, is used to produce radio-isotope such as $^{18}F$ whose life time is relatively short through test operation. For high-power operation of charged particle accelerators, the power coupler must withstand enormous stresses due to charging induced by high RF power passing through. High-power RF testing with peak power in excess of 30kW has been performed on prototype power coupler for KIRAMS-13 normal conducting cavities. CST MICROWAVE STUDIO(CST MWS) is used for fundamental RF Design, and power coupler is manufactured according to fundamental power coupler design requisite. The qualification of the couplers has occurred for the time being only in a limited set of conditions as the available RF system and control instrumentation are under improvement.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.181-187
• /
• 2017

Objective: The aim of the study was to compare & analyze on the variations of ground reaction force during ascending and descending of bus stair. Method: Simulated wooden stair of bus (raiser: 37.66 cm, width: 109 cm, tread: 29 cm) and GRF system (AMTI-OR-7/ AMTI., USA) was set up within experimental room. Adult female (n=8) performed ascending & descending of simulated bus stair, and variables analyzed consisted of TT (transfer-time), PVF (peak vertical force), LR (loading rate), DR (decay rate), CV (coefficient of variation) and AI (asymmetry index). Sample data from GRF cut off at 1,000 Hz. Results: TT showed shortest variation at phase 1 during descending, but longest variation at phase 1 during ascending of stair. PVF19 (Fz2, 100%) showed large pattern during descending than that of ascending, but rather showed small pattern during ascending of stair in case of PVF2 (Fz4). LR showed larger pattern during descending than that of ascending, but rather during ascending of stair in case of DR. Variation of CV (%) did not show difference between LR and DR, but showed higher possible occurrence of variation during descending of stair. Also AI (%) showed higher index during ascending than that of descending of stair. Conclusion: Because introduction of lowered bus stair has various realistic problems, if lined up at designated bus stopage exactly, rather can solve problems of inconvenience, reduce impulsive force and secure a stability of COG during ascending & descending of stair.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.31-36
• /
• 2020

An investigation was conducted to determine whether the ratio of the fluid to the charged particles affects the panel reflexibility rate and the drifting current flowing in the panel, in electrophoretic-based electronic paper. In this regard, three panels were produced in this study with the ratio of the charged particles to the fluid set as 1:5, 1:1, and 5:1. Each sample was driven using an identical input pulse, for which the current flowing in the panel and the output voltage of the photodiode were measured for the panel reflexibility rate. Consequently, the drifting current initially exhibited a peak value and a saturated value at a later point. This value was proportional to the ratio of the charged particles, and it was similar to this ratio when it is higher than 1:1. The output voltage of the photodiode due to the panel reflexibility rate was proportional to the ratio of the charged particles. However, the response speed decreased if the ratio was higher than 1:1. It is expected that the results of this study will contribute to the analysis of the charging of charged particles in electrophoretic-based electronic paper, and the selection of an appropriate concentration.