• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.347-352
• /
• 1992

Physicochemical properties of native and defatted nonwaxy(Dongjin byeo) and waxy(Sinseunchalbyeo) rice starches were investigated. The granule shapes of rice starches were polygonal and X-ray diffraction patterns were A types, but relative crystallinity was decreased by defatting. The amylose content of defatted starches slightly increased, but water binding capacity of defatted starches decreased. Swelling power and solubility of starches increased with the increase of temperature, at each temperature increased by defatting. Transmittance of Dongjinbyeo and Sinseunchalbyeo starch suspensions showed a rapid increase at $60{\sim}65^{\circ}C$, $55{\sim}60^{\circ}C$ respectively. The initial pasting temperature by amylograph of Dongjinbyeo and Sinseunchalbyeo starches were $66^{\circ}C$ and $64^{\circ}C$, respectively. The gelatinization temperature of defatted starches was higher than that of the nondefatted starches. Dongjinbyeo starch decreased peak viscosity and breakdown by defatting, but Sinseunchalbyeo starch unchanged.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.570-574
• /
• 2010

A diamond-like carbon (DLC) film deposited on a WC disk was investigated to improve disk wear resistance for injection molding of zirconia optical ferrule. The deposition of DLC films was performed using the filtered vacuum arc ion plating (FV-AIP) system with a graphite target. The coating processing was controlled with different deposition times and the other conditions for coating, such as input power, working pressure, substrate temperature, gas flow, and bias voltage, were fixed. The coating layers of DLC were characterized using FE-SEM, AFM, and Raman spectrometry; the mechanical properties were investigated with a scratch tester and a nano-indenter. The friction coefficient of the DLC coated on the WC was obtained using a pin-on-disk, according to the ASTM G163-99. The thickness of DLC films coated for 20 min. and 60 min. was about 750 nm and 300 nm, respectively. The surface roughness of DLC films coated for 60 min. was 5.9 nm. The Raman spectrum revealed that the G peak of DLC film was composed of $sp^3$ amorphous carbon bonds. The critical load (Lc) of DLC film obtained with the scratch tester was 14.6 N. The hardness and elastic modulus of DLC measured with the nano-indenter were 36.9 GPa and 585.5 GPa, respectively. The friction coefficient of DLC coated on WC decreased from 0.2 to 0.01. The wear property of DLC coated on WC was enhanced by a factor of 20.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.276-282
• /
• 2003

OFDM is effective for the high speed data transmission. However, the nonlinear distortion is a serious problem because of the high PAPR due to many subcarriers. The conventional SLM selects the OFDM signal with the lowest PAPR. In this method, OFDM data can be correctly recovered only if the side information about the phase sequence is transmitted to receiver. This paper proposes a new method of side information insertion into the conventional SLM and reduces the computational complexity by adaptive method. Performances are compared in case that three kinds of phase sequences are used for phase rotation factor. The adaptive SLM method has the same PAPR reduction as the conventional SLM method. The required BER can be guaranteed by the proposed method. When subcarrier number N=32, computational complexity is reduced to 48 %, 72 % and 51 % for the branch number U=4, 8 and 16, respectively.

• Journal of architectural history
• /
• v.2 no.1 s.3
• /
• pp.9-24
• /
• 1993

The objective of this study is to describe more positively and concretely the entity of traditional village through the quantitative and scientific analysis process using positive data. Dan-Gye, a traditional village in San-Cheong, has been populated since more than 500 years ago because of its ideal conditions for settlement. In this study, the fluctuations on the numbers of households in Dan-Gye were analyzed from the first settlement era to the present, and the transformations of housing sites and roads since 1913 were also analyzed. The results are as follows. 1) The village Dan-Gye has a history of more than 500 years, and the first inhabitants were the Ryus. As time went by, the Ryus' power became weak gradually, but the powers of the Kwons and the Parks who had flowed later into this village became prosperous to make up a prominent family village in the late period of Cho-Sun dynasty. Such powers had reached the peak in the early period of Japanese occupation, and although the powers became weak gradually after that time, those two families have overwhelmed other families in population and possession of large houses until now. But as the confucianism in every-day life fell off and the inhabitants moved to cities, the existence of a family community became meaningless. 2) The Kwons and the Parks have possessed the large parts of the village's housing sites. As time went by, the sites have been divided and fields have been changed to housing sites for the increasing families, and such division and change have been made chiefly on perimeter areas. 3) The characteristics of the road in Dan-Gye where traditional roads existed began to be destroyed by Japanese construction of new roads, and such destruction has continued due to the bank construction after a flood and the road constructions after 1970s.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.66-72
• /
• 2007

This paper describes the characteristics of power loss and leakage currents flowing through new and used 18[kV] zinc oxide(ZnO) surge arrester under the mixed DC and AC voltages. The mixed DC and AC voltage generator of 50[kV] peak was designed and fabricated. The I-V curves of ZnO surge arrester were measured as a function of the voltage ratio K. The I-V curves under the mixed DC and AC voltages lay between the pure DC and AC characteristics, and the cross-over phenomenon in both I-V curves and R-V curves was observed at the low current region. As a result, the increase of DC component in the mixed voltages causes the increase of resistive component of total leakage current of ZnO surge arrester. Also, in the case of same applied voltage, the leakage current flowing through the used ZnO surge arrester was higher than that of the new ZnO surge arrester.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.6
• /
• pp.585-590
• /
• 2001

The purpose of this study was to examine physical properties of the addition of Plantago powder on bread flour and dough fheology of white pan bread. Four levels(0.3, 0.6, 0.9 and 1.2%) of each Plantago powder with bread flour were tested for their effects in dough mixing using rapid visco analyzer, alveogram, farinogram and sensory test. Addition of Plantago powder(0.3, 0.6 and 0.9% ) showed almost same tendency on the initial pasting temperature but 1.2% increased it. Increment of Plantago powder showed increment of peak viscosity and final viscosity, L(extensibility) and G(swelling index) value in alveogram showed decrement with increasing Plantago powder. In farinogram the use of Plantago powder increased consistency and water absorption but decreased development time and stability. White pan bread using Plantago powder had higher value of Max. G and gardeness in rheometer than without using it. Sensory evaluation of white pan bread with 0.6% Plantago powder had the highest score.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.3
• /
• pp.247-254
• /
• 2008

The double-peak normal distribution function (DPDF) suggested by Cho et al.(2004) has the problems that the extremely high and low tidal elevations are frequently generated in the Monte-Carlo simulation processes because the upper and lower limits of the DPDF are unbounded in spite of the excellent goodness-offit results. In this study, the modified DPDF is suggested by introducing the upper and lower value parameters and re-scale parameters in order to remove these problems. These new parameters of the DPDF are optimally estimated by the non-linear optimization problem solver using the Levenberg-Marquardt scheme. This modified DPDF can remove completely the unrealistically generated tidal levations and give a slightly better fit than the existing DRDF. Based on the DPDF's characteristic power, the over- and under estimation problems of the design factors are also automatically intercepted, too.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.53-60
• /
• 2010

This paper presents a novel gain control system composed of a feedback circuit, Two stage Low Noise Amplifier (LNA) using 0.18 um CMOS technology for 5.2 GHz. The feedback circuit consists of the seven function blocks: peak detector, comparator, ADC, IVE(Initial Voltage Elimination) circuit, switch, storage, and current controller. We focus on detecting signal and designing storage circuit that store the previous state. The power consumption of the feedback circuit in the system can be reduced without sacrificing the gain by inserting the storage circuit. The adaptive front-end system with the feedback circuit exhibits 11.39~22.74 dB gain, and has excellent noise performance at high gain mode. Variable gain LNA consumes 5.68~6.75 mW from a 1.8 V supply voltage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.347-354
• /
• 1999

Generally, transceiver is operated to the remote control for the purpose of breading the traffic zone which is established on a mountain peak, island and building top using private line. Therefor, the remote control system of public radio station have been the very important role that is decision the quality relate to the quickness, accuracy, safety of communication on old type transceiver of SSB, VHF etc. In the case of using the only 1 private line which is exchanged voice signal with data signal had mixed or interrupted for up/down of channel, PTT control and monitoring of transmission channel and power. The up/down of channel and PTT control is according to the ASK and the data of monitoring is transfered to the FSK modulation, additional algorithm is studied on the serial protocol and traffic sequence using the MCS-51 processor in the simplex communication methode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2251-2257
• /
• 2006

We fabricated ZnO thin film successfully by using RF magnetron sputtering and investigated its potential for being utilized as the key material of piezoelectric device with the characterization of ZnO thin film such as such as crystallinity, surface morphology, c-axis orientation, film density. In thin study, $Ar/O_2$ gas ratio is fixed 70/30, RF power 125W, working pressure 8mTorr, distance between substrate and target 70mm, but the substrate temperature is varied from room temperature to $400^{\circ}C$. The relative intensity ($I_{(002)}/I_{(100)}$) or (002) peak in ZnO thin film deposited at $300^{\circ}$ was exhibited as 94%, then its FWHM was $0.571^{\circ}C$. Also, from the surface morphology evaluated by SEM and AFM, the film deposited at $300^{\circ}C$ showed uniform particle shape and excellent surface roughness of 4.08 m. The tendency of ZnO thin film density was exhibited to be denser with increasing substrate temperature but slightly decreased at near $400^{\circ}C$.