• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.551-561
• /
• 2009

FH system is very robust to the jamming interference. OFDM system is very good for the high speed communication system. But, it has high PAPR. SC-FDMA system based on OFT-spread OFDM was proposed to reduce high PAPR. Therefore, in this paper, we like to introduce the FH system into SC-FDMA system, which can be best solution to the jamming hostile environment and for the high power efficiency. Also, OFDM is very sensitive to ICI. Especially, ICI generated by frequency offset and phase noise breaks the orthogonality among sub-carriers, which seriously degrades the system performance. We analyze the performance of the FH SC-FDMA system in the PBJ and MTJ channel. In this paper, the ICI effects caused by phase noise, frequency offset and Doppler effects are analyzed and we like to propose the PNFS algorithm in the equalizer to compensate the ICI influences. Through the computer simulations, we can confirm the performance improvement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.155-172
• /
• 1989

The purpose of this study is to measure the bonding strength at the enamel and dentin of extracted bovine incisors when they are irradiated by W Nd: YAG, EoQ Nd: YAG, and CW $CO_2$ laser, etched and then attached by composite resin. The laser-irradiated surface, the etched surface after the laser-irradiation and the interface of the treated surface and resin are observed by using scanning electron microscope. The NP Nd:YAG laser is used at the peam power of 207 KW. The EOQ Nd: YAG laser is used at the peak power of 1.15Mk. The CW $CO_2$ laser is used at the energy output of 5W and 10W in enamel; in dentin, at the energy output of 2W. The obtained results were as follows: 1. The shear bond strength of enamel decreased in the following order: EOQ Nd:YAG laser group, NP Nd:YAG laser group, CW $CO_2$ laser groups, unlased group. The unlased group showed a significant difference from EOQ Nd:YAG laser group (P<0.01), NP Nd:YAG laser group (P<0.05), but no significant difference from CW $CO_2$ laser group (P>0.05). 2. The shear bond strength of dentin decreased in the following order: CW $CO_2$ laser group, NP Nd:YAG laser group, unlased group, EOQ Nd:YAG laser group. The unlased group showed a significant difference from CW $CO_2$ laser group (P<0.01), but no significant difference from Nd:YAG laser groups (P>0.05). 3. The scanning electron microscope of enamel revealed irregular microcrack and pore at the surface in the NP Nd:YAG laser group and CW $CO_2$ laser group, but the crackless flat surface in the EOQ Nd:YAG laser group. 4. The scanning electron microscope of dentin revealed obstruction of in most of dentinal tubule and decrease of diameter. 5. The scanning electron microscope of the interface of resin and enamel revealed prominent penetration of resin tag in the EOQ Nd:YAG laser group.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.684-690
• /
• 2010

Recently, the NG(Next Generation) system is studied for supporting convergence of various services and multi mode of single terminal. And a demand of user for taking the various services is getting increased, for supporting these services, many systems being able to transmit a large message have been appeared. In the NG system, it has to be supporting the CDMA and WCDMA besides the tele communication systems using OFDM method with single terminal An intergrated system can be improved with adopting of SoC technique. For adopting SoC technique on the intergrated terminal, we have to solve the non linear problem of HPA(High Power Amplifier). Nonlinear characteristic of HPA distorts both amplitude and phase of transmit signal, this distortion cause deep adjacent channel interference. We adopt a polynomial pre-distortion technique for this problem. In this paper, a noble modem design for NG mobile communication service and a method using polynomial pre-distorter with PAPR technique for counterbalancing nonlinear characteristic of the HPA are proposed.

• Journal of Acupuncture Research
• /
• v.33 no.3
• /
• pp.45-66
• /
• 2016

Objectives : The purpose of this study is to find parameters to compare the effects of Sa-Am acupuncture with gall bladder jeonggyeok and seunggyeok on radial pulse in healthy subjects. Methods : 60 healthy subjects participated in this study and divided into the gall bladder jeonggyeok group (GB+ group), the gall bladder seunggyeok group (GB- group) and the control group. Radial pulse was measured by a 3 dimensional pulse imaging system (DMP-3000) before, immediately after, 30 minutes after and 60 minutes after acupuncture on the Cun, Guan and Chi in the GB+, GB- group and at the same time for the control group. Results : 1. The GB+ and GB- group exhibited significantly increased T, M4/M1 and decreased T1/T, T2/T, T5/T, M1, M2 compared to the control group. 2. The GB+ and GB- group exhibited significantly increased H4, Ad/Ap, RAI/HR and decreased As/Ap, Aw/Ap in the right Guan and decreased pulse power volume/min in the left Guan compared to the control group. 3. The GB- group exhibited significantly decreased M3, M3/M1 and increased M4/M1, M5, M5/M1 compared to the GB+ group. The GB+ group exhibited significantly decreased T4/(T-T4) compared to the GB- group. 4. The GB- group exhibited significantly decreased H1 in the right Guan, Chi, H4, pulse area in the right Chi, H5, pulse power volume/min in the left Chi, right Chi, and increased main peak angle in the right Guan, Chi compared to the GB+ group. Conclusion : The effect of gall bladder jeonggyeok and seunggyeok in healthy humans may be observed on various parameters. The parameters analyzed in this study may be used to differentiate effects between gall bladder jeonggyeok and seunggyeok on radial pulse. Further studies on the effects of Sa-Am acupuncture using radial pulse are needed.

• The KIPS Transactions:PartA
• /
• v.17A no.6
• /
• pp.265-274
• /
• 2010

As the process technology scales down and integration densities continue to increase, interconnection has become one of the most important factors in performance of recent multi-core processors. Recently, to reduce the delay due to interconnection, 3D architecture has been adopted in designing multi-core processors. In 3D multi-core processors, multiple cores are stacked vertically and each core on different layers are connected by direct vertical TSVs(through-silicon vias). Compared to 2D multi-core architecture, 3D multi-core architecture reduces wire length significantly, leading to decreased interconnection delay and lower power consumption. Despite the benefits mentioned above, 3D design technique cannot be practical without proper solutions for hotspots due to high temperature. In this paper, we propose three floorplan schemes for reducing the peak temperature in 3D multi-core processors. According to our simulation results, the proposed floorplan schemes are expected to mitigate the thermal problems of 3D multi-core processors efficiently, resulting in improved reliability. Moreover, processor performance improves by reducing the performance degradation due to DTM techniques. Power consumption also can be reduced by decreased temperature and reduced execution time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.77-83
• /
• 2012

Numerical analyses through Computational Fluid Dynamics have been performed to investigate the seawater flow field characteristics for various shrouds used in horizontal axis tidal current turbine systems. Seawater flow characteristics are largely influenced under constant tidal current velocity by the shroud geometry and there is considerable difference in fluid velocity distributions around the shrouds. Especially the location and magnitude of maximum seawater flow velocity directly affect turbine performance for power generation. For the cylinder-diffuser type shroud system whose cylinder and diffuser parts have the same length accelerated flow region is formed in the overall cylinder part while maximum velocity in the nozzle-diffuser type whose nozzle and diffuser parts have the same length with symmetry, locally appears near the minimum sectional area. In case of cylinder-diffuser type shroud fluid velocity increases rather high compared with current velocity. And fluid velocity at the centerline gradually increases from the entrance, and then decreases rapidly after reaching a peak close to the middle of the cylinder part unlike the nozzle-diffuser while there is not much variation near the rear of the shroud. These results of the seawater flow characteristics with various shroud geometries can be applied to optimal design for the development of efficient tidal current power generation systems.

• Korean journal of food and cookery science
• /
• v.7 no.4
• /
• pp.63-69
• /
• 1991

This study was undertaken for the purpose of studying the physicochemical propery of mungbean and texture of mungbean starch gels. Mungbean starch gel made with different levels of oil were tested to investigate the textural characteristics by mechanical test. The results are summerized as fallows: The content of moisture fat, protein, and ash in Seonwha mungbean were shown to be about 13.19%, 1.02%, 23.57% 3.13% respectively. Those of Seonwha mungbean crude starch were 12.48%, 0.63%, 0.94%, 0.13% respectively. The gain of dry crude starch from peeled mungbean was 22.48%. Water binding capacity of Seonwha mungbean crude starch was 183.1%. The pattern of change in swelling power of Seonwha mungbean crude starch for increasing temperature increased slowly to $70^{\circ}C$, and then increased rapidly. The pattern of change in solubility was similar to that of swelling power. The amylose and amylopectin content were 22.5%, 77.5%. Brabender hot-paste viscosities of mungbean crude starch at 8% and 10% showed the similar amylogram patterns with peak vicosity. By the Rheometer measurement result of 8% 10% mungbean starch gel, Hardness and Fractuability tended to be decreased as the addition level of oil increased. Elasticity, Adhesiveness, Chewiness, L, a, and b value tended to be increased as the addition level of oil increased.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.257-262
• /
• 2012

pasting characteristics. Their water contents, water holding capacities, solubilities, swelling power, amylose contents, damaged starches, particle sizes and pasting characteristics were measured. The water content and water holding capacities of various types of rice flours collected in the market were 7.64-14.97% and 95.22-232.94%, respectively. Their solubilities and swelling power were 1.97-37.40% and 1.33-5.76, respectively. Various types of rice flour had 32.11-305.67 ${\mu}m$ particle sizes. Among the various types of rice flour collected in the market, the lowest starch damaged content was 3.17%. The peak viscosities of the samples were 17.74-295.95 RVA. Among the rice flours that were collected in the market, the lowest pasting temperature was $69.72^{\circ}C$. As a result, it was shown that rice flour types with high starch damage contents tend to have higher expressed water holding capacities. Moreover, the samples with lower particle sizes tended to have final viscosities, and pasting temperatures.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.297-310
• /
• 1992

FLECHT SEASET unblocked forced reflood tests are assessed using Apollo version of RELAP5/MOD3 5M5. The main purpose of the study is to examine the code predictability under forced reflood conditions having different initial power levels and flooding rates. Among various test matrices, the assessment calculations are performed for the test numbers 31701 31302, 31203, 31805, 34524, 31021, 34006 and 35807 These have been selected because they have similar initial conditions but different initial peak rod powers or flooding rates. In addition, various sensitivity calculations are performed for test number 31203 on the improved models of RELAP5/MOD3. Those are for the effect of Counter Current Flow Limit (CCFL) option at the outlet junction of the test section, for the effect of grid modelling on the interfacial drag calculations as well as on the heat structure calculations, and for the effect of nodalization and the time step size. The results of sensitivity studies show that the improved models of RELAP5/MOD3 enhance the code predictability. The assessment results show that the RELAP5/MOD3 has a tendency to underpredict the turn around temperature and the turn around time. But RELAP5/MOD3 silghtly overpredicts the turn around temperature for high flooding rate. The results also show that the calculated quenching by RELAP5/MOD3 is delayed with the increase of the rod power or the decrease of the flooding rate.

• Physical Therapy Korea
• /
• v.25 no.3
• /
• pp.19-26
• /
• 2018

Background: Genu varum is also known as bow leg. It is a deformity wherein there is lateral bowing of the legs at the knee. it does give rise to pain, and persistent bowing can often give rise to discomfort in knees, hips and ankles. Objects: This study investigated the effect of narrow squats on the knee joint during a gait and distance between the knees of person with genu varum. Methods: This study analyzed 23 patient with genu varum that grade III, 12 narrow squat group and 11 genenal squat group in motion analysis laboratory. The subjects of experiment took gait before and after intervention, the range of joint motion, moment of knee joint adduction, power, distance of the knees were measured. And in order to make an analysis between groups, an paiered t-test and independent t-test was carried out. For statistical significance testing, it was decided that significance level ${\alpha}$ be .05. Results: It was shown that the group of narrow squat exercise significantly decreased in distance of knees (p<.05),In moment of adduction of knee joint, it was shown to significantly decrease in two groups (p<.05), was significantly decreased in adduction, abduction, and rotation (p<.05). In relation of peak-knee adduction moment and valgus angle, there was significant decrease in narrow squat group (p<.05). Conclusion: When the above result of study were examined, a narrow squat exercise given to the genu varum patients significantly decreased the distance between the knees, range of knee adduction and abduction, knee adduction moment, knee power. And stability gains through the decrease of excursion of knee medial part be effective for the correction of genu varum deformation.