• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2329-2337
• /
• 2009

Three heteroleptic ruthenium sensitizers, Ru(L)($L^1)(NCS)_2$ [L = 4,4'-dicarboxylic acid-2,2'-bipyridine, Ru-T1: $L^1$ = (E)-2-(4'-methyl-2,2'-bipyridin-4-yl)-3-(thiophen-2-yl)acrylonitrile, Ru-T2: $L^2$ = (E)-3-(5'-hexyl-2,2'-bithiophen-5- yl)-2-(4'-methyl-2,2'-bipyridin-4-yl)acrylonitrile, and Ru-T3: $L^3$ = (E)-3-(5"-hexyl-2,2':5',2"-terthiophen-5-yl)-2- (4'-methyl-2,2'-bipyridin-4-yl)acrylonitrile)], were synthesized and used as photosensitizers in nanocrystalline dyesensitized solar cells (DSSCs). The introduction of the 3-(5-hexyloligothiophen-5-yl)acrylonitrile group increased the conjugation length of the bipyridine donor ligand and thus improved their molar absorption coefficient and light harvesting efficiency. DSSCs with the configuration of Sn$O_2$: F/Ti$O_2$/ruthenium dye/liquid electrolyte/Pt devices were fabricated using these Ru-$T1{\sim}T3$ as a photosensitizers. Among the devices, the DSSCs composed of Ru-T2 exhibited highest power conversion efficiency (PCE) of 2.84% under AM 1.5 G illumination (100 mW/$cm^2$).

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2963-2968
• /
• 2014

We report synthesis and photovoltaic properties of two new conjugated copolymers, PCPDTQxF and PDTSQxF, with 6,7-difluoro-2,3-dihexylquinoxaline unit prepared by Stille coupling reaction. The advantage of 6,7-difluoro-2,3-dihexylquinoxaline based copolymer are high PCEs due to lower HOMO energy level, long wavelength absorption and high hole mobility. The solid films of PCPDTQxF and PDTSQxF showed absorption bands with maximum peaks at about 623 and 493 nm and the absorption onsets at 711 and 635 nm, corresponding to band gaps of 1.74 and 1.95 eV, respectively. The oxidation onsets of the PCPDTQxF and PDTSQxF polymers were estimated to be 0.68 and 0.95 V, which correspond to HOMO energy levels of -5.48 and -5.75 eV, respectively. The PDTSQxF has lower HOMO energy level as compared to PCPDTQxF to lead higher $V_{OC}$ value. The device comprising PCPDTQxF:PCBM (1:2) dissolved to a concentration of 1 wt % in ODCB showed $V_{OC}$ value of 0.62 V, $J_{SC}$ value of $1.14mA/cm^2$, and FF of 0.35, which yielded PCE of 0.25%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3399-3404
• /
• 2013

A new accepter unit, pyrrolo[3,2-b]pyrrole-2,5-dione, was prepared and utilized for the synthesis of the conjugated polymers containing electron donor-acceptor pair for OPVs. Pyrrolo[3,2-b]pyrrole-2,5-dione unit, regioisomer of the known pyrrolo[3,4-c]pyrrole-1,4-dione, is originated from the structure of stable synthetic pigment. The new conjugated polymers with 1,4-diphenylpyrrolo[3,2-b]pyrrole-2,5-dione, thiophene and carbazole were synthesized using Suzuki polymerization to generate P1 and P2. The solid films of P1 and P2 show absorption bands with maximum peaks at about 377, 554 and 374, 542 nm and the absorption onsets at 670 and 674 nm, corresponding to band gaps of 1.85 and 1.84 eV, respectively. To improve the hole mobility of the polymer with 1,4-bis(4-butylphenyl)-pyrrolo[3,2-b]-pyrrole-2,5-dione unit, which was previously reported by us, the butyl group at the 4-positions of the N-substituted phenyl group was substituted with hydrogen and methyl group. The field-effect hole mobility of P2 is $9.6{\times}10^{-5}cm^2/Vs$. The device with $P2:PC_{71}BM$ (1:2) showed $V_{OC}$ value of 0.84 V, $J_{SC}$ value of 5.10 $mA/cm^2$, and FF of 0.33, giving PCE of 1.42%.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.253-269
• /
• 2017

This study identified fashion consumers disposal behavior and analyzed the effects of consumers pursuing values in disposal, environmental awareness, and sustainable fashion consumption attitudes in regards to fashion disposal behavior. A survey questionnaire was developed and data were obtained from 460 consumers in their 20's to 50's in Korea who had experienced fashion disposal behaviors during last 12 months. As a result, there were four different fashion disposal behaviors such as economical, practical, and social disposal as well as hoarding behaviors. Consumers pursuing values in disposal affected fashion disposal behavior. Practical and economical values had positively impacted economical disposal and hoarding behaviors. While hedonic value had a negative impact on economical disposal behavior, it had a positive impact on social disposal behavior. Also, environmental-social values had positively impacted practical and social disposal behaviors. Fashion-related environmental knowledge had positively impacted economical and practical disposal behaviors and PCE affected social disposal behavior, while environmental concerns had a negative impact on economical disposal behavior. Consumers attitude toward used-fashion items, fashion recycling, and fashion innovativeness affected all of fashion disposal behaviors. Although hoarding behavior has been an under researched area, the finding implied that hoarding behavior was affected by consumer's pursuing value in disposal and sustainable consumption attitude. Also, environmental-social values and attitudes toward used-fashion items would induce practical disposal behavior such as reuse by alteration or reform. Consumers economical and hedonic values can promote donations or exchange/resale of unwanted fashion items, which can lead to sustainable consumption.

• Korean Journal of Materials Research
• /
• v.27 no.4
• /
• pp.211-215
• /
• 2017

Reactive Ion Etching (RIE) and wet etching are employed in existing texturing processes to fabricate solar cells. Laser etching is used for particular purposes such as selective etching for grooves. However, such processes require a higher level of cost and longer processing time and those factors affect the unit cost of each process of fabricating solar cells. As a way to reduce the unit cost of this process of making solar cells, an atmospheric plasma source will be employed in this study for the texturing of crystalline silicon wafers. In this study, we produced the atmospheric plasma source and examined its basic properties. Then, using the prepared atmospheric plasma source, we performed the texturing process of crystalline silicon wafers. The results obtained from texturing processes employing the atmospheric plasma source and employing RIE were examined and compared with each other. The average reflectance of the specimens obtained from the atmospheric plasma texturing process was 7.88 %, while that of specimens obtained from the texturing process employing RIE was 8.04 %. Surface morphologies of textured wafers were examined and measured through Scanning Electron Microscopy (SEM) and similar shapes of reactive ion etched wafers were found. The Power Conversion Efficiencies (PCE) of the solar cells manufactured through each process were 16.97 % (atmospheric plasma texturing) and 16.29 % (RIE texturing).

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.393-400
• /
• 2017

This study was investigated on pH, heavy metals, oils and solvents in 34 surface soil samples and the samples are collected at two times for 17 farmland sites around 7 industrial areas in Northern Gyeonggi Province. As a result of pH for soil contamination monitoring network, the range of pH showed 4.4~8.4 and average was 6.3. The range of pH for Agricultural land around industrial area was 6.7~7.5 and average indicated 7.1 that mostly showed neutral condition in this area. he average concentrations of Cu, Pb, Ni, As and $Cr^{6+}$ are lower than Korea soil contamination worrisome levels at region 1 and the mean levels of farmland from the soil quality monitoring network. The average concentrations of Zn, Cd and Hg didn't exceed the soil contamination worrisome levels at region 1 but slightly higher than the mean levels of farmland from the soil quality monitoring network. The heavy metal levels of all samples are within Korea soil contamination worrisome levels at region 1. The results showed that the detected heavy metal concentrations ranged from N.D. to ~32.7% of Korea soil contamination worrisome levels at region 1. BTEX, TPH, TCE and PCE were not detected in all samples and thus the farmland around the industrial areas were free from oils and solvents contamination.

• Journal of Environmental Science International
• /
• v.8 no.6
• /
• pp.685-690
• /
• 1999

The pollution characteristics of groundwaters in Taegu City and correlation coefficients(r) between water pollution indicators were investigated for two years from January 1996 to December 1997. Volatile organic compounds such as TCE(tri-chloroethylene), PCE(tetrachloroethylene), l,l,l-trichloroethane, THM(trihalo-methane), dichloromethane, pesticides such as diazinon, parathion, malathion, and toxic inoganic matters such as As, Hg, Se, Pb, Cd, $Cr_6^+,$ CN were not detected in the groundwaters. Mean values of groundwater pollution indicators were below drinking-water standards, but hardness, $KMnO_4-C(potassium$ permanganate consumption), evaporate residues, $SO_4^{-2},\;Fe,\;NO_3^{-}-N,$ color and turbidity exceeded a little in some samples. As groundwater became deeper, hardness and evaporate residues remarkably increased, but $KMnO_4-C,\;NO_3^{-}-N,\;Cl-,$ color, turbity and bacteria decreased. $KMnO_4-C,$ evaporate residues, $Cl^-\;and\;SO_4^{-2}$ were very high at industrial and commercial areas, and $NO_3^--N$ and $NH_4^+-N$ were very high at agricultural and forest areas. It showed high positive significances in the relationships between hardness and each of evaporate residues, $SO_4^{-2}$, Zn and Mn, $KMnO_4-C$ and each of color, turbidity and Zn, color and each of turbidity, Cu, Zn and Mn, turbidity and each of Fe, Cu, Zn and Mn, and evaporate residues and each of $Cl^-,\;SO_4^{-2}$ and Zn.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1226-1235
• /
• 2016

For wearable health monitoring systems, a fundamental problem is the limited space for storing energy, which can be translated into a short operational life. In this paper, a highly efficient active voltage doubling rectifier with a wide input range for micro-piezoelectric energy harvesting systems is proposed. To obtain a higher output voltage, the Dickson charge pump topology is chosen in this design. By replacing the passive diodes with unbalanced-biased comparator-controlled active counterparts, the proposed rectifier minimizes the voltage losses along the conduction path and solves the reverse leakage problem caused by conventional comparator-controlled active diodes. To improve the rectifier input voltage sensitivity and decrease the minimum operational input voltage, two low power common-gate comparators are introduced in the proposed design. To keep the comparator from oscillating, a positive feedback loop formed by the capacitor C is added to it. Based on the SMIC 0.18-μm standard CMOS process, the proposed rectifier is simulated and implemented. The area of the whole chip is 0.91×0.97 mm², while the rectifier core occupies only 13% of this area. The measured results show that the proposed rectifier can operate properly with input amplitudes ranging from 0.2 to 1.0V and with frequencies ranging from 20 to 3000 Hz. The proposed rectifier can achieve a 92.5% power conversion efficiency (PCE) with input amplitudes equal to 0.6 V at 200 Hz. The voltage conversion efficiency (VCE) is around 93% for input amplitudes greater than 0.3 V and load resistances larger than 20kΩ.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1861-1866
• /
• 2012

The new semiconducting copolymers with 4,4-dialkyl-$4H$-cyclopenta[2,1-$b$:3,4-$b^{\prime}$]dithiophene and 2,2-dimethyl-$2H$-benzimidazole units were synthesized. The fused aromatic rings, such as cyclopentadithiophene (CPDT) unit, can make the polymer backbone more rigid and coplanar, which induces long conjugation length, narrow band gap, and strong intermolecular ${\pi}-{\pi}$ interaction. The stacking ability was controlled through attaching of linear or branched alkyl side chains. The spectra of PEHCPDTMBI and PHCPDTMBI in the solid films show absorption bands with maximum peaks at 401, 759 and 407, 768 nm, and the absorption onsets at 925 and 954 nm, corresponding to band gaps of 1.34 and 1.30 eV, respectively. The devices comprising PHCPDTMBI with $TiO_X$ showed a $V_{OC}$ of 0.39 V, a $J_{SC}$ of 1.14 $mA/cm^2$, and a $FF$ of 0.34, giving a power conversion efficiency of 0.15%. The PHCPDTMBI with linear alkyl chain on CPDT shows good solubility in organic solvent with higher PCE value than that of PEHCPDTMBI.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.87-103
• /
• 1995

Since being granted permission for self-assessment of the work environment by the Department of Labor in 1992, POSCO's Industrial Hygiene Laboratory has participated in domestic and Foreign Quality Control Programs 8 times and has obtained remarkable results. It has made a lot of effort to be a proficient laboratory with the ability to observe and analyse environmental monitoring data. The summary of results is as follows: 1. POSCO's Industrial Hygiene Laboratory has received a "P(Proficient)" grade from the round 115 to round 119 of AIHA/NIOSH PAT Program for analysis of such metals as lead, cadmium, zinc, and chromium, and also has received a "P(Proficient)" grade from its round 119 of for organic solvent analysis, i,e,. Trichloroethylene(TCE), Carbon Tetr-achloride(CTC), 1,2-Dichloroethane(DCE), 1,1,1-Trichloroethane(MCM), Tetrachloroethylene (PCE), Chloroform(CFM), Benzene(BNZ), toluene(TOL), and O-xylene(OXY). 2. In the Quality Control Evaluation Program performed by the Industrial Health Research Institute,Korea Industrial Safety Corporation, POSCO has passed impressively in the3-metal analysis test for lead, cadmium, cupper, and in the 6 organic solvent analysis test for Benzene(BNZ), toluene(TOL), O-xylene(OXY), Trichloroethylene(TCE) and Methyl isobutyl keton(MIBK), n-Hexane with 2 standard deviations. These analytic techniques should be practically applied to various fields, and reliable results of environmental monitoring should be considered to improve the work environment and to keep workers from occupation related diseases.