• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.686-692
• /
• 2012

Solid free-form fabrication (SFF) technology was developed to fabricate three-dimensional (3D) scaffolds for tissue engineering (TE) applications. In this study, we developed a polymer deposition system (PDS) and created 3D microstructures using a bioresorbable polycaprolactone (PCL) polymer. Fabrication of 3D scaffolds by PDS requires a combination of several devices, including a heating system, dispenser, and motion controller. The system can process a polymer with extremely high precision by using a 200 ${\mu}m$ nozzle. Based on scanning electron microscope (SEM) images, both the line width and the piled line height were fine and uniform. Several 3D micro-structures, including the ANU pattern (a pattern named after Andong National University), $45^{\circ}$ pattern square, frame, cylindrical, triangular, cross-shaped, and hexagon, have been fabricated using the polymer deposition system.

• The Research Journal of the Costume Culture
• /
• v.6 no.3
• /
• pp.46-55
• /
• 1998

The purpose of this study was to develop the better fitting and more comfortable slacks pattern for women. 10 types of slacks pattern were made and worn compared with the sensory evaluations method. The main results of this study were as follows 1. Sensory evaluation for appearance; According to the result of means among the 10 slacks patterns, Type 2 method slacks was most satisfactory, and the next was the Type 4 slacks followed by Type 3, Type 5,6, Type 8, Type 1, Type 7, Type 9 Type 10 method slacks. 2. Sensory evaluation for comfort; The result of means showed that the Type 5 method slacks was most comfortable, and the next was the Type 3,8 slacks followed by Type 6,9 Type 7, Type 1,2,3, Type 10 method slacks.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1190-1197
• /
• 2003

The purpose of this study is to compare and analyze methods of women's apparel prototypes and provide for some useful fundamental data to improve the apparel prototype suitable for Korean women. Two different drafting methods, the Bunka pattern of Japan Bunka Women's University and the Secoli pattern of Italy istituto carlo secoli, an italian pattern drafting institute, were selected. The result and discussion are as follows; In the calculation formula, the Bunka was shown more comfort at arm-hole part, because of it's lower arm-hole depth, wider arm-hole width and lower cap height in comparison with the Secoli. At the shoulder angle, the Bunka is inclined more in front shoulder than the back shoulder, whereas the Secoli is inclined more in back shoulder than the front shoulder. It could explain that the Bunka is suitable for bendforward type and the Secoli is suitable for lean-back type. In the sensory test, the one-piece pattern of the Secoli with 4cm ease was highly estimated in ease. It seems young women's preference to body conscious clothes which reflected in many new elastic fabrics. At the bust point to neck, the Bunka was highly estimated, compared with the Secoli. It seems like to be caused that for the bust point to neck formula, the Bunka used bust girth, the Secoli used stature which has low correlation with the bust point to neck.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.637-646
• /
• 2016

The goal of this study is to provide basic data on developing circular knit basic pattern for women in their 20's. Production conditions of circular knit product pattern making among domestic women's apparel industry was researched, and collected data on sizes and ease amounts from woven and circular knit pattern were compared and analyzed. According to the result of the survey, product measurements adjusted to the actual body size fit for the brand's image were used, and the common problem among manufacturers and consumers regarding circular knit products turned out to be change in size and form due to stretching. For the basic pattern of circular knit, stretching quality was reflected in the woven basic pattern based on plain stitch(single knit) and then dart was removed and ease amount was reduced. The result of looking into size and ease amount about woven and circular knit torso & sleeve block shows that there is a significant difference among chest circumference, hip circumference, bi-shoulder length, interscye back, interscye front, scye depth, upper arm circumference and wrist circumference, and it was clear that circumference and width on the areas around the wrist tended to fit around the body more when circular knit was used instead of woven fabric.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.140-146
• /
• 2009

In this study, the ideal human body of adult woman is to express, and the body dimension of the woman model is produced and compared in doll model with the bodily dimension by presenting the body pattern to produce the dolls with the ideal body proportion visually. For the research process, by collecting, comparing and analyzing the body pattern of the currently used embroidery fashion doll, the pattern of body suit that displays the body of women is designed with the size of model with the height of 168cm. This is scaled for 1/4 of its entirety to make the doll of around 40cm and produced the research doll with two revisions. When compared with the ratio of each part of the body for the height of the produced research doll with the bodily ration of the major ratio of the height of the standard bodily size of Size Korea 2004, the ratio of the category of the height is almost consistent, and the width category is shown approximately 80~85%, waist for 75%, thickness category for approximately 90% as the ideal ratio.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.42-44
• /
• 2007

The a-Si:H TFTs decreasing parasitic capacitance of source-drain is fabricated on glass. The structure of a-Si:H TFTs is inverted staggered. The gate electrode is formed by patterning with length of $8{\mu}m{\sim}16{\mu}m$ and width of $80{\sim}200{\mu}m$ after depositing with gate electrode (Cr) $1500{\AA}$ under coming 7059 glass substrate. We have fabricated a-SiN:H, conductor, etch-stopper and photoresistor on gate electrode in sequence, respectively. The thickness of these, thin films is formed with a-SiN:H ($2000{\mu}m$), a-Si:H($2000{\mu}m$) and $n^+a-Si:H$ ($500{\mu}m$). We have deposited $n^+a-Si:H$, NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-stopper pattern. The NPR layer by inverting pattern of upper gate electrode is patterned and the $n^+a-Si:H$ layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. The a-Si:H TFTs decreasing parasitic capacitance of source-drain show drain current of $8{\mu}A$ at 20 gate voltages, $I_{on}/I_{off}$ ratio of ${\sim}10^8$ and $V_{th}$ of 4 volts.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.2
• /
• pp.63-67
• /
• 2018

Recent mold industry uses many roll-to-roll processes that can produce high production speed and precision machining and automation process. In the circular cylinder mold, however, patterns of less than $10{\mu}m$ are difficult to manufacture and maintain. In this study, we fabricated a circular cylindrical mold with a DLC thin film which have high hardness, low coefficient of friction and high releasability by using lithography and lift-off process. The height, line width, and pitch of the fabricated DLC macro pattern are $3.1{\mu}m$, $9.1{\mu}m$ and $20.2{\mu}m$, respectively. The pattern size is finer than the current applied to the aluminum cylinder type, and this shows the possibility of practical use of DLC micro pattern roll mold.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.107-113
• /
• 2022

At present, it is possible to manufacture electrodes down to several micrometers (~ ㎛) using inkjet printing technology owing to the development of precision ejection heads. Inkjet printing technology is also used in the manufacturing of bio-sensors, electronic sensors, and flexible displays. To reduce the difference between the electrode design/simulation performance and actual printing pattern performance, it is necessary to analyze and optimize the processable area of the ink material, which is a fluid. In this study, process optimization was conducted to manufacture an IDE pattern and fabricate an impedance sensor. A total of 25 IDE patterns were produced, with five for each lamination process. Electrode line width and height changes were measured by stacking the designed IDE pattern with a nanoparticle-based conductive ink multilayer. Furthermore, the optimal process area for securing a performance close to the design result was analyzed through impedance and capacitance. It was observed that the increase in the height of stack layer 4 was the lowest at 4.106%, and the increase in capacitance was measured to be the highest at 44.08%. The proposed stacking process pattern, which is optimized in terms of uniformity, reproducibility, and performance, can be efficiently applied to bio-applications such as biomaterial sensing with an impedance sensor.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.431-438
• /
• 2010

The radiation pattern of conformal transducers installed on a curved surface is likely to be complicated depending on the array pattern on the curved surface. In this research, the acoustic sources constituting a conformal transducer are arrayed in equi-angle, equi-interval, and geodesic dome forms, and the radiation pattern function of each of the array geometries has been derived, and therewith the radiation pattern has been analyzed for each array geometry. Based on the analysis result, we have determined the equi-interval array geometry that provides the widest beam width with the lowest side lobe level among the three array geometries. Results of the present work are expected to be utilized to the design of conformal transducer structures.