• 디자인학연구
• /
• 제15권1호
• /
• pp.81-92
• /
• 2002

Through network draft, it′s possible to describe curve draft with main motive in a lobby loom and to fulfill draft design more conveniently thanks to the development of computer device. Network draft was introduced by Alice Schlein, who is an American weaving artist, and I had ever published research paper on "The unfolding and development of network draft using computer dobby system" . The purpose of the next study was to develop the design of network draft while do make a design network draft in a dobby loom with 16 shafts, and could reach follow conclusion as a result of designing a variety of drafts. The initial of 4-end in a loom with 16 shafts was a basic condition to describe more perfect shape in comparison with draft in 8 shafts through the development of network. The development of draft line was essential to deride the pattern of fabric, and the pattern of draft is decided according to selecting key peg plan. Thereby, could get a variety of draft patterns derive from mix key peg plan with initial selected by developing the kind of draft line and applying diverse key peg plan. As for the variation and diversification of draft line, the shape of patters varied depending col the curve extent and connectivity of draft line and the size of curve. The pattern of network draft can be changed infinitely by free round curve of draft line. In addition, a variety of draft designs shall be developed by increasing the number of shaft, enlarging the scale of draft line, and developing more creative draft line.

• 한국정보전자통신기술학회논문지
• /
• 제1권3호
• /
• pp.3-8
• /
• 2008

본 논문에서는 H 평면에서 전방향성 방사패턴을 갖고 저자세를 갖는 평면형 안테나를 제안하였다. 전기적 소형 모노폴 안테나가 갖는 캐패시턴스 성분에 인덕티브 성분의 ENG(Epsilon Negative) 쉘 구조를 부설함으로써 임피던스를 매칭시켰다. ENG 쉘 구조는 4개의 계단형 L-슬롯으로 대칭된 인덕티브 로딩 구조로 이루어져 있다. 실제측정 결과 제안된 안테나의 임피던스 대역폭 ($VSWR{\leq}2$)은 150MHz (2.5 ~ 2.65GHz)를 나타내었고 최대 방사 이득은 중심 주파수 2.56GHz에서 1.12dBi를 나타내었으며 전방향성 방사패턴을 나타내었다. 제안된 안테나는 저자세 높이와 전방향성 방사를 요구하는 시스템에 적용될 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.983-984
• /
• 2007

The spindle motor used on the ODD has a characteristic that electromagnetic pulsation and noise change differently by magnetization pattern of rotor. Therefore, design of magnetizer yoke that make to have optimal magnetization pattern is very important. In this paper, we proposed an analysis method that applies magnetizer analysis result to the spindle motor. We measured back-EMF of the real spindle motor. And then, we verified validity of the proposed analysis method by comparing the measurement and analysis result. Also, we designed the magnetizer shape that has optimal magnetization pattern by using proposed method. As a result, we reduced cogging torque of the spindle motor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.593-597
• /
• 2005

FIB equipment can perform sputtering and chemical vapor deposition simultaneously. It is very advantageously used to fabricate a micro structure part having 3D shape because the minimum beam size of ${\phi}$ 10nm and smaller is available. Currently FIB is not being applied in the fabrication of this micro part because of some problems to redeposition and charging effect of the substrate causing reduction of accuracy with regards to shape and productivity. Furthermore, the prediction of the material removal rate information should be required but it has been insufficient for micro part fabrication. The paper have the targets that are FIB-CVD characteristic analysis and minimum line pattern resolution achievement fur 3D micro fabrication. We make conclusions with the analysis of the results of the experiment according to beam current, pattern size and scanning parameters. CVD of 8 pico ampere shows superior CVD yield but CVD of 1318 pico ampere shows the pattern sputtered. And dwell time is dominant parameter relating to CVD yield.

• 한국음향학회지
• /
• 제41권6호
• /
• pp.637-646
• /
• 2022

임의의 곡면 배열에서 단위 빔 형성에 사용되는 부배열은 조향 방위마다 기하학적 형상이 다르다. 이 때문에 조향 방위 별 부배열의 빔 패턴은 항상 균일하지 않다. 본 논문에서는 볼록 최적화를 이용한 빔 형성 기법을 곡면 배열에 적용하고, 조향 방위별 빔 성능의 균일성이 향상되는 것을 보였다. 시뮬레이션은 절단 구면 형상의 곡면 배열에 대해 수행되었다. 고각 3 dB 빔 폭의 표준 편차가 크게 감소하였으나 반대급부로 지향 지수도 감소하는 것을 관찰했다. 이를 완화시키기 위한 하나의 방법으로 쉐이딩 함수를 이용한 최적화 기법을 제안한다.

• 한국음향학회지
• /
• 제29권7호
• /
• pp.422-430
• /
• 2010

Tonpilz 트랜스듀서의 방사 패턴은 구조 변수들에 의해 많은 영향을 받는다. 본 연구에서는 단일 모드 Tonpilz 트랜스듀서에 대해서 동일한 유효 면적을 가지는 다양한 전면추 형상에 따른 방사 패턴을 계산하였다. 트랜스듀서의 전면추 형상은 가장 많이 사용되는 원형과 정삼각형, 정사각형, 정육각형 및 정팔각형에 대해 분석하였으며, 각 형상에 대해 방사 패턴 수식을 유도하였다. 유도한 수식을 바탕으로 전면추 형상과 크기에 따른 방사 패턴의 변화를 해석하고, 서로의 특성을 비교하였다. 계산 결과의 타당성은 유한 요소 해석을 이용하여 확인하였다.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.199-213
• /
• 2022

Experimental and discrete element approaches were used to examine the effects of F shape non-persistent joints on the failure behaviour of concrete under uniaxial compressive test. concrete specimens with dimensions of 200 cm×200 cm×50 cm were provided. Within the specimen, F shape non-persistent joint consisting three joints were provided. The large joint length was 6 cm, and the length of two small joints were 2 cm. Vertical distance between two small joints change from 1.5 cm to 4.5 cm with increment of 1.5 cm. In constant joint lengths, the angle of large joint change from 0° to 90° with increments of 30°. Totally 12 different models were tested under compression test. The axial load rate on the model was 0.05 mm/min. Concurrent with experimental tests, numerical simulation (Particle flow code in two dimension) were performed on the models containing F shape non-persistent joint. Distance between small joints and joint angles were similar to experimental one. the results indicated that the failure process was mostly governed by both of the Distance between small joints and joint angles. The axial loading rate on the model was 0.05 mm/min. The compressive strengths of the samples were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. In the first, there were only a few acoustic emission (AE) hits in the initial stage of loading, and then AE hits rapidly grow before the applied stress reached its peak. Furthermore, a large number of AE hits accompanied every stress drop. Finally, the failure pattern and failure strength are similar in both approaches i.e., the experimental testing and the numerical simulation approaches.

• 한국의상디자인학회지
• /
• 제24권3호
• /
• pp.73-84
• /
• 2022

This study aims to present the direction of research for rational clothing design and production and improve the productivity of the fashion industry by analyzing the most recent 11 years (from 2010 to 2021) with regard to the clothing construction field. Analyzing the research trends in the field of clothing construction, which is deeply related to clothing production, will suggest the direction of research for clothing design and production. To analyze the current status of research in the field of clothing construction, research trends were analyzed, focusing on 525 research journal articles from six Korean clothing-related journals with terms related to torso and upper and lower limbs. The analysis results of this study are as follows. First, the rapid development of IT technology requires changes and innovations in all processes of clothing construction, including body shape analysis and pattern design. Therefore, it is believed that both body shape and pattern research should be continuously conducted to produce clothes with an excellent silhouette and fit depending on the body shape through studies, such as developing 3D patterns and converting 3D body figures into 2D patterns, among others. Second, since body shape studies are concentrated on young, middle-aged, and the elderly, it is believed that various body shape studies should be conducted on infants and elementary, middle, and high school students who have significant changes in body shape due to changes in the living environment. Third, if the content of pattern research is expanded to various items and is widely conducted, it will contribute to the production of clothing that has an excellent fit. Fourth, at a time when aging in society is accelerating, it is believed that research on patterns and clothing systems that can increase the fit of clothing by analyzing the body types of elderly male and female consumers should be actively conducted. Because the analysis was conducted only among six Korean academic journals, there is a limitation in the expanded interpretation of the results derived from this study.