• 한국컴퓨터정보학회논문지
• /
• 제17권11호
• /
• pp.173-177
• /
• 2012

본 논문에서는 이미지를 통해 상품을 검색하고 이에 대한 상품 구입을 하는 쇼핑몰 시스템을 설계, 구현한다. 쇼핑몰 서비스에서, 이미지는 다양한 형태로 얻게 된다. 그림을 그릴 수 있는 그림판 기능, 패턴 및 도형 기반 상품 검색을 통해 다양한 형태의 이미지를 지원하는 특징이 있다. 이 쇼핑몰 시스템을 위하여 UML 사용사례 다이어그램과 클래스 다이어그램을 이용하여 설계하며, JSP를 이용하여 구현한다. 고객이 직접 찾는 디자인을 간단히 그리면 비슷한 그림의 상품이 나오게 되는 공간을 제작하며, 상품을 검색하고 이를 구매할 수 있는 시스템을 구현한다.

• 대한기계학회논문집B
• /
• 제31권3호
• /
• pp.225-233
• /
• 2007

The growth of GaN on the patterned substances has proven favorable to achieve thick, crack-free GaN layers. In this paper, numerical modeling of transport and reaction of species is performed to estimate the growth rate of GaN from tile reaction of TMG(trimethly-gallium) and ammonia. GaN growth rate was estimated through the model analysis including the effect of species velocity, thermal convection and chemical reaction, and thermal condition for the uniform deposition was to be presented. The effect of shape and construction of microscopic pattern was also investigated using a simulator to perform surface analysis, and a review was done on the quantitative thickness and shape in making GaN layer on the pattern. Quantitative analysis was especially performed about the shape of reactor geometry, periodicity of pattern and flow conditions which decisively affect the quality of crystal growth. It was found that the conformal deposition could be obtained with the inclination of trench ${\Theta}>125^{\circ}$. The aspect ratio was sensitive to the void formation inside trench and the void located deep in trench with increased aspect ratio.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• 한국가정과학회지
• /
• 제4권2호
• /
• pp.123-140
• /
• 2001

The purpose of this study is to find the suitable suit design of mid-aged men by examining visual effects in Physical and Psychological side aspects. I used convenience sampling by considering sex and age distribution. These methods were used to analyze data that were frequency analysis, variate analysis, centesimal scale, primary factor analysis, three primary variate analysis, duality variate analysis, equation variate analysis and Cronbach's multiplex range verification 1. Image perception of men's suit was analyzed with arrangement, numbers of button, pattern and the shape of one's body and was divided into charming, youthfulness, modernism. affection and manly. 2. 1) There are partly resemblance difference in physical visual effect by the shape of body and suit design. 2) There are partly resemblance differences in psychological visual effect by one's shape and suit design. In conclusion arrangement, number of button and Pattern are very important to give an effect on whole visual effect man's suit. Also, these were felt differently in each types of body Therefore it is confirmed that the type of body is important fluent to make people perceive.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.847-851
• /
• 1997

In the stereolithography process, the accuracy of cured shape depends on laser power, scanning speed, scanning pattern, resin characteristics etc. When three-dimensional objects are built, higher laser power gives higher building efficiency. Normally we could control scanning speed and scanning pattern, which affect curing thickness and generate volume of curl in & after building. Oligomer, Monomer and Initiator are major components. Kinds and of them decide characteristic of resin. In this paper, we deak with major facts and their characteristics for precision shape building.

• ALGAE
• /
• 제26권4호
• /
• pp.299-315
• /
• 2011

The morphology, taxonomy, and distribution of species belonging to the diatom family Rhizosoleniaceae were studied from the marine coastal waters of Korea. Rhizosolenid diatom taxa were collected at 30 sites from September 2008 to February 2010 and were analyzed by light and scanning electron microscopy. We identified 6 rhizosolenid genera, including Rhizosolenia, Proboscia, Pseudosolenia, Neocalyptrella, Guinardia, and Dactyliosolen. We describe 5 genera in this study, except Rhizosolenia. Five genera were compared in detail with congeneric species. Six genera within the family Rhizosoleniaceae were divided into two groups based on morphological diagnostic characters including valve shape, areolae pattern, the shape of external process, and girdle segments in the column. The first group had a conoidal valve and loculate areolae, which comprised Rhizosolenia, Proboscia, Pseudosolenia, and Neocalyptrella, and the second group of Guinardia and Dactyliosolen showed a flat or rounded valve and poroid areolae. Important key diagnostic characters were based on valve shape, areolae pattern on the segment, external process, position of the tube, and the valve margin. D. phuketensis was new to Korean coastal waters.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.211-214
• /
• 1996

This paper propose a method for pattern recogniton using spectrum analyzer and fuzzy ARTMAP. Contour sequences obtained from 2-D planar images represent the Euclidean distance between the centroid and all boundary pixels of the shape, and are related to the overall shape of the images. The Fourier transform of contour sequence and spectrum analyzer are used as a means of feature selection and data reduction. The three dimensional spectral feature vectors are extracted by spectrum analyzer from the FFT spectrum. These Spectral feature vectors are invariant to shape translation, rotation, and scale transformations. The fuzzy ARTMAP neural network which is combined with two fuzzy ART modules is trained and tested with these feature vectors. The experiments include 4 aircrafts and 4 industrial parts recognition process are presented to illustrate the high performance of this proposed method in the ion problems of noisv shapes.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.15-21
• /
• 1997

In the stereolithography process, the accuracy of cured shape depends on laser power, scanning speed, scanning pattern, resin characteristics etc. When three-dimensional objects are built, higher laser power gives higher building efficiency. Normally we could control scanning speed and scanning pattern, which affect curing thickness and generate volume of curl in & after building. Olgomer, Monomer and Initiator are major components. Kinds and volume of them decide characteristic of resin. In this paper, we deal with major facts and their characteristics for precision shape building.

• 한국측량학회지
• /
• 제31권5호
• /
• pp.411-419
• /
• 2013

3차원 건물을 모델링하기 위해 항공영상 또는 라이다 데이터를 이용하여 건물 외곽선 추출이나 지붕을 구성하는 패치를 추출하는 단계를 거친다. 이러한 3차원 정보를 자동으로 획득하는 알고리즘 개발과 같은 효과적인 정보의 획득에 대한 연구가 활발히 진행되고 있으나, 추후 추출된 정보의 활용이나 유지관리에 대한 연구는 미흡한 상태이다. 본 연구는 3차원 정보를 얻었다는 가정 하에 건물의 형태에 따른 검색을 위한 연구이다. 이를 위하여 벽면, 분할 지붕면, 바닥과 같은 건물의 구성체를 노드(node)로 표현하고 이들의 인접성 관계를 그래프 구조로 객체의 형태를 정의하는 토폴로지 설계 방법을 제안하였다. 제안된 방법에 의해 생성된 토폴로지를 건물 그래프 데이터베이스에 저장하고, 토폴로지 정보를 이용한 패턴매칭을 수행하여 건물을 검색한 결과의 분석을 통해 제안된 객체 토폴로지 설계방법의 효용성을 입증하였다. 그래프 구조의 토폴로지를 기반으로 건물을 검색할 수 있었으며, 검색 조건을 부여하여 건물의 유사 정도를 조절하며 검색할 수 있었다. 또한 축척 및 회전에 불변한 객체의 형태묘사 방법으로 사용될 수 있다고 사료된다.

• 한국컴퓨터정보학회논문지
• /
• 제23권7호
• /
• pp.63-72
• /
• 2018

The purpose of this study was to compare and analyze the pants pattern of the lower body of 70-85 aged women. I tried to present excellent pants pattern that is convenient and suitable for the activities of elderly women. Through this, I tried to provide basic data necessary for making elderly women 's pants. As a result of evaluating the appearance of the pants pattern according to the body type, the fit of the type 2 was evaluated as the highest in the item except the position of the front waist line. For the objective evaluation of the 3D simulation, the air gap of the pants by the body part analysis showed that there was not much difference in the air gap around the waist circumference, hip circumference, thigh circumference, and knee circumference by applying the same drawing method and body size. However, in type 2, the air gap of thigh and knee circumference parts was larger than that of type 1 and type 3. Because type 2's legs were thin but it used same size of hemline. It was thought that it is necessary to adjust the space of front and back crotch length to 1 inch (2.54 cm) instead of 1.9 cm (3/4 inch) so that the waistline position of all three types can be set up a little to cover the abdomen. This study was conducted to investigate changes in body shape of elderly women and to develop appropriate pants patterns.