• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.351-358
• /
• 2016

Consistent with a previous study on the brown planthopper Nilaparvata lugens (BPH) (Seo et al., 2009), we identified seven distinct EPG waveforms (np, L1, L2, L3, L4-a, L4-b, and L5) in adult female Laodelphax striatellus (SBPH) that fed on rice plants, by using the direct current electrical penetration graph (DC-EPG) system. The shape of waveforms and the pattern of occurrence of each waveform of SBPH were very similar to those of BPH. L3 and L4-a always occurred prior to L4-b. Periodical honeydew excretion was observed in L4-b only. Microsection observation following laser stylectomy revealed that the tips of SBPH stylets severed in L3, L4-a, and L4-b were commonly located in or near the phloem region of rice plants, but were located in the xylem in L5. Plant sap flowed from the stylets severed in L4-b only, and its main carbohydrate component was detected as sucrose by HPLC analysis. These results and the patterns of EPG waveform progress in SBPH suggested that feeding activities on rice plant tissue were relevant to each EPG waveform. L1 and L2 corresponded to the initiation of stylet penetration and stylet movement with salivation on the outside of the vascular bundle. L3 and L4-a were related to feeding activities within the phloem region in preparation for phloem sap ingestion. L4-b was closely associated with phloem sap ingestion, and L5 corresponded to xylem feeding behavior.

• Journal of Radiation Protection and Research
• /
• v.37 no.3
• /
• pp.149-158
• /
• 2012

In this paper, we measured the variations of radon concentrations in groundwater using low-level Liquid Scintillation Counter (LSC), an instrument for analyzing the alpha and beta radionuclides at its 10 sites around the Kumjung-Gu, north-western of Busan. Optimization of Pulse Shape Analyzer (PSA) to determinate the highest value of figure of merit (FM) was decided using Quantulus 1200 LSC with radium-226 source, the optimal PSA level was shown in the range of 100 to 110. The results show that the Minimum Detectable Activity (MDA) of radon concentrations is 0.61 $Bq{\cdot}L^{-1}$ for 20 minutes in PSA level. We find that the average radon concentration in groundwater is high in granitic rock area and low in volcanic rock area. (Biotite granite : 191.39 $Bq{\cdot}L^{-1}$, Micro graphic granite : 141.88 $Bq{\cdot}L^{-1}$, Adamellite : 92.94 $Bq{\cdot}L^{-1}$, Andesite (volcanic) : 35.35 $Bq{\cdot}L^{-1}$). No significant seasonal variation pattern is observed from the long-term variation analysis from 10 selected sites. We have not seen the significant correlation of radon concentration to groundwater temperature, atmospheric temperature, atmospheric pressure and rainfall. The concentration variation is probably caused by more complex factors and processes.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.87-93
• /
• 1985

Intraabdommal abscess usually causes distress with fever, leukocytosis, pain and toxicity. Diagnosis of intraabdominal abscess is occasionally difficult and It has high morbidity. However radiologic method, such as ultrasonography, CT scan, or RI scan are helpful to early detection of intraabdominal abscess. Among these methods, ultrasonography is a non-invasive technique and performed without discomfort to patient. And also differential diagnosis between cystic and solid lesion is very easy and sequential ultrasonography in same patient is valuable for the evaluation of treatment effect. We analyzed the ultrasonic features of 48 cases with intra-abdominal abscesses and the results are as follows; 1. In total 48 cases, the intra-abdominal abscesses were 30 cases, the retroperitoneal abscesses, 5 cases, and the visceral abscesses, 13 cases. 2. The causes of the intra-abdominal abscesses were perforating appendicitis (25 cases), postoperative complications (5 cases), pyogenic and amebic hepatic abscesses (13 cases), and the others (5 cases). 3. Round or oval shaped lesions were 26 cases (54%), irregular shape, 18 cases (38%), and multiple abscess formation in 4 cases (8 %). 4. The size of the lesions were between 5 and 10cm in diameter in 54% of total 48 cases, and the most frequent feature of the echo-pattern of the lesions was cystic with or without internal echogenicity (69%).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.47-58
• /
• 1998

The purpose of this study was to investigate an influence of the change of central panoramic curves on the image reconstruction in the dental implant CT. The author designed three experimental groups according to the location of central panoramic curve. In group A, central panoramic curve was determined as the curve connecting the center of roots from the first premolar to the first molar. In group B, central panoramic curve was determined as the line connecting the lingual cortical plate at the level of the mesial aspect of the first premolar with the buccal cortical plate at the level of the mesial aspect of the first molar. In Group C, central panoramic curve was determined as the line connecting the buccal cortical plate at the level of the mesial aspect of the first premolar with the lingual cortical plate at the level of the mesial aspect of the first molar. Twenty four reformatted CT images was acquired from four mandibles embedded in the resin block and twenty four contact radiographs of dog specimens were acquired. Each Image was processed under Adobe Photoshop program analysed by MSPA(mandible/maxilla shape pattern analysis) variables such as MXVD, MXHD, UHD, MHD, and LHD. The obtained results were as follows ; 1. The mean of MXVD variable was 19.9, 20.2, and 20.0 in group A, B, and C, respectively, which were smaller than actual value 20.5. But, there was no significant difference among 3 groups (p>0.05). 2. The mean of MXHD, UHD, MHD, and LHD variables in group A, B, and C was 11.9, 12.2, and 12.3; 9.3, 9.5, and 9.6; 10.0, 10.3, and 10.3; 9.2, 9.3, and 9.4 respectively which were equal to or greater than the actual value 11.8, 9.3, 10.0, and 9.2. But, there was no significant difference among 3 groups (p>0.05). 3. The number of noneffective observations with difference over or under 1 mm with comparison to the actual value was 24(20％), 58(48.3％), and 52(43.3％), respectively, in group A, B, and C. 4. In group A, the number of observations over 1 mm and under 1 mm was 9 and 15, respectively, but in group Band C, the number of observations over 1 mm was more than under 1 mm.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.21-28
• /
• 1989

For the study of the fatigue behavior, high-strength bolted connections on a small scale were manufactured, and carried on fatigue tests. Its experimental values were analysed by stress-fatigue life (S-N) curve. Three types of specimens : the base metal, the cireular hole and the welded sperimens had same net section were made. Through the same tests those experimental values were compared with those of the high-strength bolted conneetions. The results of these studies are as followings. It was found that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the high-strength bolted conneetions were much more about 14% and 16% than that of the base metal specimen. It was thought that this trend was due to frictional force increasing fatigue strength. It was known that fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the welded joints were less 29% and 21% than that of base metal specimen. It was thought that that trend was due to weld flaw. It was appeared that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the high-strength bolted connections were much more about 38% and 30% than that of welded joint. It was thought that it was due to both frictional force increasing the fatigue strength in bolted connections and weld flaw decreasing the fatigue strength in welded connections. It was found that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the B3 specimens were much more 2% and -2% than that of the B4 specimen. It was thought that that trend was due to the frictional force, which concerned with shape of specimen. It was known that the fatigue strength in $F_{n=100,000}$ and $F_{n=2,000,000}$ of the specimen with circular hole was less 61% and 65% than that of base metal. It was known that the allowable stress for bolted joint was higher than that of welded Joints. If that research is continued and more data are accumulated it can be expected that a basic pattern to provided the indicator of the fatigue design of the bolted connections of steel structures and persume the safety and lifeproof of existing structures is given.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.23-33
• /
• 2011

In this study, a CFPBS (Cone-type Friction Pendulum Bearing System) was developed which controls the acceleration delivered to the structure to prevent damage and degradation of the critical communication equipment in case of an earthquake. The isolation performance of the CFPBS was evaluated by numerical analysis. The CFPBS was manufactured in the shape of a cone differenced from the existing FPS (Friction Pendulum System), and a pattern was engraved on the friction surface. The natural frequencies of the CFPBS were evaluated from a free-vibration test with the seismic isolator system consisting of four CFPBSs. In order to verify its earthquake-resistant performance, a numerical analysis program was created from the equation of the CFPBS induced from the equations of motion. A simplified theoretical equation of the CFPBS was proposed to manufacture the equipment which could demonstrate the necessary performance. Artificial seismic waves satisfying the maximum earthquake scale of the Korean Building Code-Structural (KBC-2005) were created and verified to review the earthquake-resistant performance of the CFPBS by numerical analysis. The superstructural mass of the CFPBS and skew angle of the friction surface were considered for numerical analysis with El Centro NS (1940), Kobe NS (1995) and artificial seismic waves. The CFPBS isolation performance evaluation was based on the results of numerical analysis and the executed comparative analysis between the results from numerical analysis and the simplified theoretical equation under the same conditions.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.261-286
• /
• 2012

Rumors are widely prevalent in marketplace and It can be problematic and dangerous for the company's reputation and damages their image. Recently, many companies are given trouble by rumors. As getting invigorates the social media, there is high possibility to shape the vicious rumors without any confirmation whether information is true or not. It affects the companies' reputation and trust they have built for long time, also sales drop off. Despite numerous denials, the rumor persisted, keeping occur again and again all the times. Refutation purposes to decrease levels of belief in a rumor. First, establish Study 1 that a variation in identification influences the impact of a rumor on individuals' beliefs. Furthermore, we analyze the effectiveness of a refutation under varying degree of one's level of identification with the rumor object. According to research result, the response pattern of identification and disidentificaion consumers are very different. Disidentifiers, who engaged in systematic processing, believed the rumor less only when the refutation contained strong arguments. Identifiers, processing heuristically, remained unbelieving in the rumor. Study found that identification is an important moderator of consumer response to negative rumors. These defensive processes alleviate the bad influence of that information, and also can reduce the likelihood of attitude degradation.

• Korean Journal of Social Welfare
• /
• v.68 no.3
• /
• pp.127-147
• /
• 2016

The purpose of this study was to examine the impact of 10-year psychosocial rehabilitation services provided by a psychosocial rehabilitation center on the quality of life for the mentally ill. The data were collected from a psychosocial rehabilitation center located in Daegu metropolitan area using a quasi-experimental study design. The experimental group consisted of 23 mentally ill subjects and the comparison group consisted of 23 mentally ill subjects that did not use the mental health services voluntarily. The quality of life were measured at baseline and every year over 10-year period. The collected data were analyzed using Hierarchical Linear Modeling(HLM). The findings of this study were as follows: First, it was found that the psychosocial rehabilitation services were effective increasing experimental group's quality of life outcomes. Second, the analyses indicated that the psychosocial rehabilitation services' effectiveness could be maintained at least 10 years indicating that the services had a long-term positive impact on the mentally ill. Third, it was revealed that the experimental group's quality of life outcomes improved over time showing a curvelinear shape rather than showing a linear pattern. The psychosocial rehabilitation services provided by a psychosocial rehabilitation center were positively affected the quality of life as well as maintained at least 10 years for the mentally ill. Finally, the implications and limitations of these findings were discussed.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.551-555
• /
• 2003

The physicochemical properties of starches from Korean and Chinese red bean were investigated. Korean red bean starch (KRBS) contained lower water content, but higher crude fat and carbohydrate content than those of Chinese red bean starch (CRBS). The round shape of starch granules from Korean and Chinese red bean was observed. The granule size of KRBS was smaller than that of CRBS. The whiteness of KRBS (87.22%) was significantly higher than that (86.16%) of CBRS. X-ray diffraction patterns between KRBS and CRBS were not significantly different, resulting in showing C type. There was significant difference in amylose content between KRBS and CRBS. The blue value of KRBS was 1.02, which was higher than that of CRBS. Swelling power of KRBS was higher up to $75^{\circ}C$ than that of CRBS, but then decreased. Solubility showed the same pattern as the swelling power. Our findings suggest that Korean red bean has better quality than Chinese red bean in terms of the physicochemical properties.