• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.772-776
• /
• 2001

The flow structures of turbulent shear layer behind oil fences with different tip configurations were investigated experimentally using flow visualization and PIV velocity field measurement. An oil fence was installed in a circulating water channel and the flow structure around the fence tip was mainly analyzed in this experiment. The four tip configurations tested in this experiment are knife edge; semi-circle edge, circular edge and rectangular edge. The 300 instantaneous velocity fields were measured using the single-frame PIV system and they were ensemble averaged to give the mean velocity field and spatial distribution of turbulent statistics. Free stream velocity was fixed at 10ms/sec and the corresponding Reynolds number based on the fence height was Re=4000. As a result, for the oil fence with rectangular edge, the streamwise velocity component was decreased. On the other hand it was increased for the oil fence with circular edge. For all four fences tested in this study, general flow pattern of the lower shear layer is analogous but the upper layer shows difference depending on the tip configurations. The oil fence with circular edge has more diffusive upper shear layer than that of the others. The shear layer of the oil fence with rectangular edge has relatively thin thickness. The oil fence with circular edge was found to be proper shape for tandem fence.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.119-126
• /
• 2010

We need to develop a target market for elderly women by increasing the ratio of functional apparel. The purpose of this study was to provide basic data for developing a Leisure Sports Jumper and improving the quality of life of clothing for female elderly consumers. This study reviewed the current situation on the production of the functional Leisure Sports Jumper for the elderly women in literature. For the experimental study, we selected Leisure Sports Jumpers from five apparel brands, and evaluated a sensory test on 20 subjects representing the average body shape of the elderly women aged from 65 to 75. After the first sensory test, we manipulated the patterns for samples of the Leisure Sports Jumper. In the second sensory test, visual and cognitive appropriateness of the Leisure sports jumpers were assessed by the elderly women. The results of the study were as follows: the Leisure Sports Jumper of brand 'C' showed the highest appropriateness in terms of neck, armholes, and sleeves among the 5 brands. The Leisure Sports Jumper of brands 'B' and 'D' showed the lowest appropriateness in the width of the armpits among the 5 brands. Except for the length of the Leisure Sports Jumper, the margin, location of the pocket, and armholes had the lowest score in the first test showing over 3.5 points.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.18-36
• /
• 2006

The purpose of this research was to establish a green-networks from the perfective of landscape ecology in order to improve the function of urban green spaces. The study site was Dalsu-Gu in Daegu City. This research consisted of three phases. In the first phase, field surveys were carried out in order to understand existing distribution pattern of green spaces in the study site. 533 green spaces surveyed in the first phase were classified into 7 patterns and 24 types. The total area of the green spaces in Dalsu-gu was 3,329ha. Specifically the area of the 'urban nature parks' type was 57.49% of the total area of green spaces in Dalsu-gu, and it was expected that 'urban nature parks' type can play important roles in the green-networks in Dalsu-gu. Two analysis with green spaces in 9 types including 'urban nature parks', 'rivers' and 'neighborhood parks' were performed to establish a basic network frame of the green-networks. In the second phase, 'mutual connectivity analysis' and 'mutual matrix analysis' were performed to select core green spaces of a green-networks using 'areas of each green space and a distance between each space' and 'a rate of green spaces and a rate of water permeable pavement'. The results of the second phase indicated that, in mutual connectivity analysis, large green spaces apart from each other were evaluated as having higher mutual connectivity than small green spaces near to each other. In mutual matrix analysis, the green spaces with higher mutual connectivity and the small green spaces near to each other were evaluated as having better mutual matrix. In the last phase, we structured a basic frame of the green-networks in Dalsu-Gu. The results suggested that the basic frame of the green-networks in Dalsu-Gu was composed on four green-network axes and its shape mirrored a cruciform(+) of northwest${\longleftrightarrow}$southeast directions and southwest${\longleftrightarrow}$northeast directions, The Duryu neighborhood park is at the central point of this green-networks.

• The Korean Journal of Cytopathology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 1996

Phyllodes tumor(PT) is a rare distinctive fibroepithelial breast tumor that occasionally shows unpredictable clinical behavior. Wide excision should be the primary treatment of PT and enucleation, the standard procedure for fibroadenoma(FA), is proscribed due to high frequency of local recurrence. Therefore an accurate preoperative diagnosis of PT is essential in order to ensure proper surgical treatment. However, the differentiation between benign PT and FA is often difficult on the basis of cytologic findings. In an attempt to better understand the cytologic features of benign PT and possibly to differentiate PT from FA on the findings of fine needle aspiration(FNA) smears, we reviewed cytologic smears from 22 histologically diagnosed cases each of benign PT and FA, respectively. The cytologic features assessed were cellularity and atypia of both epithelial and stromal components, and shape of epithelial cell clusters. Atypia of stromal cells was more frequent in PT, while blunt branching pattern of epithelial cells was more frequent in FA. The specific cytologic diagnosis of PT is not possible in many cases, but the abundance of stromal cells with moderate nuclear atypia in the correct clinical setting such as older age and larger size(>4cm) allows the diagnosis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1213-1222
• /
• 2008

In this paper, the isolation of the IBBD array antenna is analyzed as functions of the element spacing and the height of the flat plate inserted between array elements for the intelligent antenna system. It is found that the isolation between array elements improves with increasing the array spacing. The array configuration with the plate between the elements is enhanced by about 13 dB more In the isolation than the one without the plate. The plate-inserted $4{\times}4$ elements IBBD array antennas are fabricated and the radiation characteristics are measured and analyzed for the various heights of the plate. It is found that the gain decreases slightly with increasing the height of plate but the shape of radiation pattern does not show a remarkable change.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1092-1098
• /
• 2007

Since one decade, the detection of HFPD (High frequency Partial Discharge) has been proposed as one of the effective method for the diagnosis of the power component under service in power grids. As a tool for HFPD detection, Metal Foil sensor based on the embedded technology has been commercialized for mainly power cable due to its advantages. Recently, for the on-site noise discrimination, several PA (Pulse analysis) methods have been reported and the related software, such as Neural Network and Fuzzy, have been proposed to separate the PD (Partial Discharge) signals from the noises since their wave shapes are completely different from each other. On the other hand, the relevant fundamental investigation has not yet clearly made while it is reported that the effectiveness of the current methods based on PA is dependant on the types of sensors. Moreover, regarding the identification of the vital defects introducible into the Power Cable, the direct identification of the nature of defects from the PD signals through Metal Foil coupler has not yet been realized. As a trial for solving above shortcomings, different types of software have been proposed and employed without any convincing probability of identification. In this regards, our novel algorithm 'PA Map' based on the pulse analysis is suggested to identify directly the defects inside the power cable from the HFPD signals which is output of the HFCT and metal foil sensors. This method enables to discriminate the noise and then to make the data analysis related to the PD signals. For the purpose, the HFPD detection and PA (Pulse Analysis) system have been developed and then the effect of noise discrimination has been investigated by use of the artificial defects using real scale mockup. Throughout these works, our system is proved to be capable of separating the small void discharges among the very large noises such as big air corona and ground floating discharges at the on-site as well as of identifying the concerned defects.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.27-36
• /
• 2005

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates Per fault. This Paper Proposes reliability model using the generalized gamma distribution, which can capture the monotonic increasing(or monotonic decreasing) nature of the failure occurrence rate per fault. Equations to estimate the parameters of the generalized gamma finite failure NHPP model based on failure data collected in the form of interfailure times are developed. For the sake of proposing shape parameter of the generalized gamma distribution, used to the special pattern. Data set, where the underlying failure process could not be adequately described by the knowing models, which motivated the development of the gamma or Weibull model. Analysis of failure data set for the generalized gamma modell, using arithmetic and Laplace trend tests . goodness-of-fit test, bias tests is presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.362-367
• /
• 2005

Ultrasonic backward radiation profile is frequency-dependent when the incident region has deptional gradient of acoustical properties or multi-layers. Until now, we have measured the profiles of principal frequencies of an used transducers so that it was not easy to characterize the frequency dependence of the SAW(surface acoustic wave) from the backward radiation profile. We tried to measure the spectral backward radiation profiles using DFP(digital filer package) in a Lecroy DSO(digital storage oscilloscope). The measured spectral profiles showed that the steel specimen of #1200 surface treatment have 2% SAW velocity dispersion of the loaded case and the severly rusty steel specimen have the very big changes in the shape and pattern of the spectral profile. It is concluded that the spectral backward radiation profiles could be very effective tool to evaluate the frequency dependence of surface area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.120-132
• /
• 1998

This stusy was to investigate the marginal fitness of porcelain-fused-to- metal crown after succesive firing cycle. Main variables were the degree of marginal curvature of labiocervical margin and the type of alloy. The exaggerated marginal curvature(EMC) was created by additional reduction at the faciocervical wall of the normallized marginal curvature (NMC)-typed ivorine tooth by using milling machine. The difference in the shape was the mid facial margin was placed 2mm apical to cemento- enamel junction in labial surface. Three types of alloy were high noble, noble, and base metal alloy. Test specimens were divided into 8 groups and each group had 8 specimens. Sixty four ceramometal crowns were made totally. Measurement stages were following degassing, opaquing. body porcelain firing, and glazing, and measuring sites were 4. (midmesial, midfacial, middistal, and midlingual). Digital, travelling measuring microscope (0.5 um precision, Olympus. Japan) was used under ${\times}250$ magnification. Within the limitation of this investigation, it was concluded as belows: 1. The pattern of marginal distortion was varied. Degassing stage was not a specific, causative stage that induce most of total marginal distortion during whole procedure fabricating a ceramometal crown. Body firing stage induced discrepancy relatively more than other firing stages. 2. The specimens that were Ni-based alloy and had EMC were distorted persistently following successive fabricating procedures. But marginal openings were decreased after glazing. 3. The release of metal grinding-induced stress was presumed as a cause that induce marginal distortion. 4. The amount of discrepancies of the labial and lingual margins were greater than that of the mesial and distal margin in the specimen that had EMC. 5. Silver-plated die was not enough to resist abrasion during repeated seating of metal copings on the die-holding device.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.440-443
• /
• 2007

In this paper, microstrip antenna is designed for industrial-scientific-medical(ISM)band of S-Band. We proposed that radiation element of antenna, which is rectangle patch shape. The feeding structure used L-shaped structure. Center frequency and -l0dB bandwidth are investigated by change of length and width in patch plane. And maximum gain, front to back ratio and 3dB beam width is presented by simulation radiation pattern of antenna in frequency ISM Band. The center frequency is 2.45GHz, band width is $2.314{\sim}2.577GHz$ with 263MHz(11%). And the antenna maximum gain is 9.3dBi, 3dB beam width E-plane is $52.5^{\circ}$, H-plane is $64.7^{\circ}$.