• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-246
• /
• 2006

This paper deals with an analysis of SCR thyristor switching pattern for a power quality disturbance generator with phase jump function. The proposed generator can be applied to the performance test of custom power devices. Voltage sag, swell, outage, unbalance and phase jump after outage are provided by the generator. The phase jump operating principle of the generator is described and analysed. Especially, a proper switching of the SCR thyristors for the proposed generator is important to guarantee the system reliability. Therefore the switching patterns for the thyristors in each made were analysed.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.2008-2014
• /
• 1999

IDDQ 테스팅은 CMOS 회로에서 발생되는 여러 종류의 물리적 결함을 효율적으로 검출하는 테스팅 방식이다. 본 논문에서는 테스트 대상회로의 게이트내부에서 발생하는 단락을 고려하여, 이 결함을 검출하기 위한 테스트 패턴을 찾아 주는 IDDQ 테스트 패턴 발생기를 구현하였다. 테스트 패턴을 생성하기 위해 게이트 종류별로 모든 내부 단락을 검출하는 게이트 테스트 벡터를 찾아냈다. 그리고 10,000개의 무작위패턴을 테스트대상 회로에 인가하여 각 게이트에서 요구되는 테스트 벡터를 발생시켜 주면 유용한 테스트 패턴으로 저장한다. 입력된 패턴들이 모든 게이트 테스트 벡터를 발생시켜 주거나 10,000개의 패턴을 모두 인가했을 경우 테스트 패턴 발생 절차를 종료한다. ISCAS '85 벤처마크 회로에 대한 실험을 통하여 기존의 다른 방식보다 성능이 우수함을 보여주었다.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.139-147
• /
• 2020

This paper suggests a nonlinear pressure consideration scheme through an unsteady pipe network analyzer for leakage detection with a portable pressure wave generator. In order to evaluate the performance of a proposal scheme, linear input pattern has been simulated and experiments had been carried out under both no leakage and one leakage conditions in a reservoir-pipeline-valve system. This method using portable pressure wave generator showed that a leakage can be detected from a reflection where a leakage is originated through time domain analysis. Meaningful similarity in pressure response between nonlinear input pattern and experimental results were found both no leakage and a leakage conditions.

• 한국산업정보학회논문지
• /
• 제16권5호
• /
• pp.1-8
• /
• 2011

This paper proposes a new input pattern generator for minimal leakage power in the nanometer CMOS technology considering all the leakage current components (sub-threshold leakage, gate tunneling leakage, band-to-band tunneling leakage). Using the accurate macro-model, a heuristic algorithm is developed to generate a input pattern for the minimum leakage. The algorithm applies to ISCAS85 benchmark circuits, and the results are compared with the results of Hspice. The simulation result shows that our method's accuracy is within a 5% difference of the Hspice simulation results. In addition, the simulation time of our method is far faster than that of the Hspice simulation.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.248-252
• /
• 2002

Many sensors such as a structured grid pattern generator, a laser, and CCD camera to information have been used, but most of algorithms for a calibration are inefficient memory and experiment data are required. In this paper, the calibration algorithm of a structured grid pattern based on triang is introduced to calculate 3D information in the real world. The beams generated from str pattern generator established horizontally with the CCD camera are projected on the calibn CCD camera observes the intersection plane of a light and an object plane. The 3D infon calculated using observed and calibration data. This proposed method in this paper has advantages such as a memory saving and an experimental data since the 3D information are obtained simply triangulation method.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1074-1079
• /
• 2004

지금까지 3차원 정보를 얻기 위하여 CCD카메라, 레이저, 구조화된 격자 발생기 등과 같은 여러 센서들이 사용되어져 왔지만 대부분의 캘리브레이션 알고리즘들은 많은 메모리와 실험 시간을 필요로 하기 때문에 비효율적이었다. 본 논문에서는 실세계 상의 3차원 정보를 얻기 위한 삼각법을 기반으로한 구조화된 격자 캘리브레이션 알고리즘이 소개된다. CCD카메라와 수평으로 설치된 구조화된 격자 패턴 생성기로부터 생성된 빔들이 캘리브레이션 면에 사영된다. CCD 카메라는 대상물과 사영된 빔이 교차한 평면을 측정한다. 그리고 3차원 데이터는 측정된 값과 캘리브레이션 데이터를 이용하여 계산된다. 본 논문에서 제안한 방범은 3차원 정보를 간단한 삼각법으로 획득하였기 때문에 효율적인 측정시간과 메모리 절약의 이점을 가지고 있다.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.1034-1041
• /
• 2001

A numerical model which simulates the flow boiling process of the ammonia/water solution within a plate type generator for ammonia/water absorption refrigerators was developed. The ammonia/water solution flows downward under gravity and the ammonia/water vapor generated by flow boiling flows upward. The heating medium flows counter to the ammonia/water solution. The flow pattern within the generator was assumed to be a bubbly flow, and the liquid and vapor phases were assumed to be saturated. It was shown that the boiling of ammonia occurred mainly in the upper part of the generator. The effects of the heating medium inlet temperature, the mass flow rate of the heating medium and the mass flow rate of ammonia/water solution into the generator on the generation of ammonia/water vapor were investigated.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권6호
• /
• pp.324-329
• /
• 2004

Six stator slot couplers(SSC) and a flux probe sensor installed on the stator winding slots of large turbine generator. Assessment of insulation condition has been based upon the measurements of partial discharge(PD) of stator windings and shorted-turn of rotor windings in operating large turbine generator. The maximum PD magnitude(Qm), normalized quantify number(NQN), PD pattern and shorted-turn were measured using on-line insulation condition monitoring system. The NQN and Qm of slot PD side in the phase A are indicated the highest value in six SSC sensors. Monitoring system results showed that discharge at conductor surface and internal discharge were detected at the surface of stator winding and in voids of the groundwall insulation. Insulation of stator and rotor windings in large turbine generator was judged to be in good condition.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.170-175
• /
• 1999

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and its's high sensitivity. Especially, when projecting a grid pattern over the object the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, new method for grid pattern generation system by polygonal mirror and Laser Diode. This system is applied the projection moire and the PMP.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1625-1626
• /
• 2013