• Physical Therapy Korea
• /
• v.25 no.2
• /
• pp.53-61
• /
• 2018

Background: Stroke patients show abnormal walking patterns due to brain injury. In order to have the desired walking pattern, appropriate stimulation is required to activate the central pattern generator. For this reason, our study performed treadmill ambulatory training with rhythmic auditory stimulation. However we did not consider the influence of visual feedback. Objects: The purpose of this study was to compare the gait abilities in chronic stroke patients following either treadmill walking training with rhythmic auditory stimulation and visual feedback (TRASVF) or treadmill walking training with rhythmic auditory stimulation (TRAS) alone. Methods: Twenty-one stroke patients were divided into two groups: A TRASVF group (10 subjects) and a TRAS group (11 subjects). They received 30 minutes of neuro-developmental therapy (NDT) and walking training for 30 minutes, five times a week for three weeks. Temporal and spatial gait parameters were measured before and after the training period. The Biodex gait trainer treadmill system measured gait parameters. Results: After the training periods, the TRASVF group showed a significant improvement in walking speed, the step length of the affected limb, and time on each foot of the affected limb when compared to the TRAS group (p<.05). Conclusion: The results of this study showed that the treadmill walking training with rhythmic auditory stimulation and visual feedback improved individual gait ability more than the treadmill walking training with rhythmic auditory stimulation alone. Therefore, visual feedback should be considered along with rhythmic auditory stimulation training.

• Proceedings of the KSPS conference
• /
• 1996.02a
• /
• pp.137-155
• /
• 1996

The purpose of this paper is to generate a pitch contour which is affected by tile phonetic environment and the number of syllables in each Korean isolated word using a neural network. To do this, we analyzed a set of 513 Korean isolated words, consisting of 1-4 syllables and extracted the pitch contour and the duration of each phoneme in all the words. The total number of phonemes we analyzed is about 3800. After that we approximated the pitch contour with a 1st order polynominal by a regression analysis. We could get the slope, the initial pitch and the duration of each phoneme. We used these 3 parameters as the target pattern of the neural network and let the neural network learn the rule of the variation of the pitch and duration, which was affected by the phonetic environment of each phoneme. We used 7 consecutive phoneme strings as an input pattern for a neural network to make the network learn the effect of phonetic environment around the center phoneme. In the learning phase, we used 3545 items(463 words) as target patterns which contained the phonetic environment of front and rear 3 phonemes and the neural network showed the correctness rate of 98.43%, 98.59%, 97.7% in the estimation of the duration, the slope, the initial pitch. In the recall phase, we tested the performance of tile neural network with 251 items(50 words) which weren't need as learning data and we could get the good correctness rate of 97.34%, 95.45%, 96.3% in the generation of the duration, the slope, and the initial pitch of each phoneme.

• The Journal of Information Technology
• /
• v.7 no.1
• /
• pp.155-161
• /
• 2004

During normal machine operation, partial discharge(PD) measurements were performed with turbine generator analyzer(TGA) in imitation stator winding of high voltage motors. The motor was energized to 4.47kV, 6.67, respectively. Applied voltage to Imitation winding was used two voltage level, 4.47[kV] and 6.67[kV]. Motors having imitation stator winding were installed with 80pF capacitive couplers at the terminal box. Case of PD Pattern regarding applied voltage phase angel, the PD patterns were displayed two dimensional and three dimensional. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). As the result, we could discrimidate using TGA the difference of internal and surface discharge for imitation stator winding. We have used the other technique, in order to feature extraction of faulty signals on stator winding, Daubechies Discrete wavelet transform and Harmonics analysis(FFT) about faulty signals.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.221-233
• /
• 2007

In this paper, a simple but effective position profile generation algorithm for single axis high dynamic linear machine drive system is presented. In the recent industrial application fields like as LCD/PDP and semiconductor factory, requirements for the high performance positioning system with optimal position profile generator are highly increased to reduce the overall processing time. There might be various solutions for position profile generating algorithm according to the application type. A square-wave Impact quantity(Jerk) based algorithm with minimal locomotion time is argued in this paper to minimize the total time of one movement under some specific constrains such as maximum speed limit and maximum acceleration limit. In order to reduce the calculation efforts and satisfy the minimal locomotion time condition, the time variants representing each profile sector and a simple condition comparison algorithm are adopted. Also, the actual implementation method for profile generation algorithm and it's real performance results are presented through commercial linear machine drive system.

• Journal of Biomedical Engineering Research
• /
• v.24 no.6 s.81
• /
• pp.523-531
• /
• 2003

We developed a PC-based 8-channel electrical stimulation system for transcutaneous functional electrical stimulation (FES), and applied it to FES exercise and paraplegic walking. The PC program consists of four parts: a database, a stimulation pattern generator, a stimulus parameter converter, and an exercise program. The stimulation pattern can be arbitrarily generated and edited by using the mouse on the PC screen, and the resulting stimulus parameters arc extracted from the recruitment curves, and transmitted to the 8-channel stimulator through the serial port. The stimulator has nine microprocessors: one master and eight slaves, Each channel is controlled by the slave microprocessor, and is operated independently. Clinical application of the system to a paraplegic patient showed significant increase in the knee extensor torque, the fatigue resistance, and the leg circumference, The patient can now walk about 50 meters for more than 2 minutes.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2873-2878
• /
• 2007

The mixing vanes attached to the spacer grid of rod bundles are used to improve the heat transfer in heat exchanger devices by controlling the characteristics of the flow structures and turbulence. In this study, velocity patterns induced by two types of mixing vane(split and swirl vane) are measured by the PIV technique to better understand how to effect on the cross and secondary vortex flow patterns in $5{\times}$ rod bundle simulating the fuel assembly of the nuclear reactor. A successful measurement of the lateral velocity patterns was conducted using a specially designed beam sheet generator and experimental loop at KAERI. As the result, we found that for the cross flow between subchannels, the split vane is more effective than the swirl vane, while for the secondary vortex flow in each subchannel, the swirl vane's one is larger and longer than split vane's one.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.9-15
• /
• 2004

New WSW(Wrap Side Wall) is proposed to decrease junction electric field in this paper. WSW process is fabricated after first gate etch, followed NM1 ion implantation and deposition & etch nitride layer. New WSW structure has buffer layer to decrease electric field. Also we compared the hot carrier characteristics of WSW and conventional. Also, we design a test pattern including pulse generator, level shifter and frequency divider, so that we can evaluate AC hot carrier degradation on-chip. It came to light that the universality of the hot carrier degradation between DC and AC stress condition exists, which indicates that the device degradation comes from the same physical mechanism for both AC and DC stress. From this universality, AC lifetime under circuit operation condition can be estimated from DC hot carrier degradation characteristics.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.293-301
• /
• 2001

A patient-specific musculoskeletal model, whose parameters can be identified noninvasively, was developed for the automatic generation of patient-specific stimulation pattern in FES. The musculotendon system was modeled as a torque-generator and all the passive systems of the musculotendon working at the same joint were included in the skeletal model. Through this, it became possible that the whole model to be identified by using the experimental joint torque or the joint angle trajectories. The model parameters were grouped as recruitment of muscle fibers, passive skeletal system, static and dynamic musculotendon systems, which were identified later in sequence. The parameters in each group were successfully estimated and the maximum normalized RMS errors in all the estimation process was 8%. The model predictions with estimated parameter values were in a good agreement with the experimental results for the sinusoidal, triangular and sawlike stimulation, where the normalized RMS error was less than 17%, Above results show that the suggested musculoskeletal model and its parameter estimation method is reliable.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.919-926
• /
• 2009

Renewable energy or green energy is a hot issue in theses days. Since wind resource can be endlessly supplied by nature, researchers and common people are interested in study how to use that resource at home or company. Especially, many architects have tried to integrate wind power generator for a part of building. So in this paper, three buildings installed wind power turbine are targed to CFD analysis and these buildings are Bahrain trade center, Discovery tower, and Pearl river tower. Bahrain trade center is the first building installed real wind turbine, Discovery tower is constructing at Texas, and Pearl river tower is designed and proved by china researchers. These buildings have very different type of wind power turbine and each turbine has different conditions f3r best power generation. Therefor this paper will focus on characteristic shape of buildings, wind power turbine type, and expected purpose of construction. Moreover, CFD analysis will show wind flow pattern and wind speed while wind is passing through wind turbine of three tall buildings. CFD analysis for three buildings make comparison the wind flow patterns with experimental result.

• Korea-Australia Rheology Journal
• /
• v.18 no.2
• /
• pp.109-118
• /
• 2006

A finite-element method was employed to analyze axisymmetric unsteady motion of a deformable bubble near the wall. In the present study a deformable bubble in a Newtonian medium near the wall was considered. In solving the governing equations a structured mesh generator was used to describe the collapse of highly deformed bubbles with the Arbitrary Lagrangian Eulerian (ALE) method being employed in order to capture the transient bubble boundary effectively. In order to check the accuracy of the present FE analysis we compared the results of our FE solutions with the result of the collapse of spherical bubbles in a large body of fluid in which solutions can be obtained using a 1D FE analysis. It has been found that 1D and 2D bubble deformations are in good agreement for spherically symmetric problems confirming the validity of the numerical code. Non-spherically symmetric problems were also solved for the collapse of bubble located near a plane solid wall. We have shown that a microjet develops at the bubble boundary away from the wall as already observed experimentally. We have discussed the effect of Reynolds number and distance of the bubble center from the wall on the transient collapse pattern of bubble.