• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1169-1181
• /
• 1994

The Gamma Network contains the redundant path thereby is provides the ability to tolerate the faults occured. However, in case of identical the source and destination number, only a single path exists, therefore there is no way of connecting for the fault situation. In addition, for the dynamic packet routing strategy, it shoed perform backtracking analysis to find the redundant path. In this paper we proposed a new network, Dual Network, to resolve these drawbacks. The Dual Network uses switching elements about the same network size as the Gamma Network except first and last stage, and it is more efficient than the Gamma Network, for it has reduced the switching stage by one. And since is used a destination tag routing scheme for the control algorithm, it has on advantage of becoming of simpler and faster routing control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.26-33
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding one switcher, one lossless snubber quasi-resonance capacity to power source for general welding machine This full-bridge soft switching DC-DC convoter· topology can applicable 600[V] switching device (IGBT)incase of AC 400[V] common power source because the voltage of active switcher is 1/2 of DC bus line voltage. And low voltage hight current out)ut that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Journal of Global Scholars of Marketing Science
• /
• v.16 no.3
• /
• pp.61-86
• /
• 2006

The main purpose of this study is to conceptualize and investigate the relationships between the antecedents and outcomes of customer satisfaction and the linking variables of brand preference and repurchase intention in service industries. To achieve this objective, the study tries to validate the structural equation model and causal relationships among the model's elements involving antecedents to customer satisfaction(perceived quality, value, equity), consequences(brand preference, repurchase intention), and moderating variable/switching cost, customer loyalty). Empirical findings are as follows: First, the effect of two antecedents/perceived quality and value) on customer. satisfaction was accepted but perceived equity was rejected. Second, I found out that there were direct or indirect relationships between the mediating variables/switching cost, customer loyalty, brand preference) and repurchase intention. This means that the proper management concerned with indirect path is probably more important for the success of services industries. Third, the direct effects of customer satisfaction and switching cost on repurchase intention were not significant against the existing studies excepting brand preference. This implies that repurchase intention was mainly intensified by the indirect path, 'customer loyalty${\rightarrow}$brand preference${\rightarrow}$repurchase intention' and 'switching cost${\rightarrow}$brand preference${\rightarrow}$repurchase intention.' The service marketers make efforts not only to strengthen the direct casual linkage but also to consolidate the indirect connections leading to create repurchase intention. Finally, the proper management of these structural relationships will help clarify the role of service marketer resulting in increasing sustainable competitive advantage in service industries.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.41-49
• /
• 2004

Increase of internet users and new types of applied traffics, have led to demand for more bandwidth for each application. Hence, the amount of internet traffic has risen sharply and it has demanded to use limited resources, such as wavelength and bandwidth, more effectively. These kind of needs can be satisfied with OXC(Optical cross-connects) based on GMPLS that carry out IP packet switching and wavelength switching at the same time and Provide very wide bandwidth. In RSVP-TE signaling of GMPLS studied by IETF. every lambda router in core network should be able to convert wavelength. So, lots of wavelength converters and needed and building and managing cost is high. Another problem is that optimized traffic is limited. In this paper We suggest strengthened GMPLS RSVP-TE signaling algorithm for a better lightpath setup. When setup signaling is blocked suggested algorithm does not send PathErr message to Edge Router, but looks for nearest lambda router which can convert wavelength and carry out setup signaling from that node. Such algorithm can reduce the chance of blocked lightpath setup signaling and provide effective arrangement of lambda router in core network by calculating proper number of wavelength converter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.181-188
• /
• 2019

The migration path of a multiple-generation technology that occurs during a technological substitution by a new technology is important to understanding the phenomenon of technological substitution, and can contribute to understanding the process of technological innovation. This research defines the concept of migration path and develops a model of the types of migration paths by multiple dimensions (actor, generation, and time) in a multiple-generation technology. Based on a literature review and tracking of migration paths according to multiple dimensions, the definitions and types of migration paths were provided, and the accuracy of the model was verified based on a case study of the semiconductor industry. The migration paths of suppliers are modeled with three types (switching, leapfrogging, and new entrance paths), and the migration paths of customers are modeled with four types (switching, leapfrogging, new entrance, and diffusion paths) in a multiple-generation technology. This research will be useful for understanding the migration paths in the phenomenon of technological substitution, and can be applied to other industries in addition to the semiconductor industry, including various actors. In addition, suppliers and customers can understand technological substitution and can establish a technology strategy against their competitors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.938-945
• /
• 2004

This paper describes the problems of the existing two multi-layer routing policies(policy 1 and policy 2) and suggests new multi-layer routing policy(policy 3) which is established the packet LSP by inquiry on packet LSP lambda routing tables for GMPLS based optical If Network. All policies of multi-layer routing schemes first try to allocate a newly requested electrical path to an existing optical path that directly connects the source and destination nodes. U such a path is not available, all policies employ different procedures. Policy 1 tries to find available existing optical paths with two or more hops that connect the source and destination nodes and policy 2 tries to establish a new one-hop optical path between source and destination nodes. Policy 3 tries to establish a new one-hop optical path by inquiry on information of the packet LSP lambda routing tables between source and destination nodes. The performances of the three multi-routing policies are evaluated by computer simulation. Simulation results show that policy 3 is the excellent of routing time and traffic acceptance capabilities compare to existing two polices if p is large, where p is the number of packet-switching-capable ports p.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.28-32
• /
• 1998

This paper presents novel ZVZCS PWM DC-DC converters. The proposed soft-switching technique achieves ZVS and ZCS simultaneously at both turn-on and turn-off of the main switch and diode by using only one auxiliary switch. Also, the proposed soft-switching technique is suitable for not only minority but also majority carrier semiconductor devices. The auxiliary circuit of the proposed topology is placed out the main power path and therefore, there are no voltage/current stresses on the main switch and diode. The operating principle of the proposed circuit is illustrated by a detailed study with the boost converter as an example. The validity of the proposed converter is verified by theoretical analysis, simulation and experiment results.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.1
• /
• pp.21-25
• /
• 2007

A two-dimensional TCAD MEDICI simulator was used to examine the voltage transfer characteristics, on-off switching properties and latch-up of a CMOS inverter as a function of the n-channel length and doping levels. The channel in a LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of a CMOS inverter. The digital logic levels of the output and input voltages were analyzed from the transfer curves and circuit operation. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.168-171
• /
• 2005

The conception of the passive lossless snubber with the simpler is presented. Thus a necessity condition of the passive lossless soft switching converter with the simplest topology is directed. A novel passive regenerative snubber called soft snubber applied to a hard switching converter is proposed. The passive snubber consists of a snubber inductor, two snubber rectifiers, and a snubber capacitor. The losses are reduced by inserting a snubber inductor in the series path of the rectifier during it's turn off. It is so simple that can make energy reset or capacitor discharged directly without producing any current circulation. To show the superiority of this converter is verified through the experiment with a 640W, 100kHz prototype converter.

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.62-70
• /
• 2006

This paper presents a new power plane design method incorporating a single geometry derived from a unit cell of photonic bandgap(PBG) structure. This method yields constantly wide suppression of parallel plate resonances from 0.9 GHz to 4.2 GHz and is very efficient to eliminate PCB resonances in a specified frequency region to provide effective suppression of simultaneous switching noise(SSN). It is shown that with only two cells the propagation of unwanted high frequency signals is effectively suppressed, while it could provide continuous return signal path. The measured results agree very well with theoretically predicted ones, and confirm that proposed method is effective for reducing EMI, with measured near-field distribution. The proposed topology is suitable for design of high speed digital system.