• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.138-146
• /
• 2022

Research on the reduction of plastic use to prevent environmental pollution is urgently needed. Accordingly, studies on reducing the weight of polyethylene terephthalate (PET) bottles are currently being conducted. PET bottles are fabricated by injection stretch blow molding. In this study, stretch blow molding for fabricating PET bottles using preform studied through a computer simulation. Blowing characteristics are analyzed by varying the start time of the pre-blow, which is one of the process conditions of stretch blow molding. Simulation results and the preform inflation process are presented, and the parameters of stretch ratio, stretching path, thickness distribution, and weight distribution of blown PET bottles are investigated.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2015

Objective : The purpose of this study was to analyze the correlation between physical factors (X-factor, X-factor stretch) and club factors (club speed, ball speed, club path, smash factor, vertical launch angle, spin rate, flight time, total length) during impact and it affect on the total distance of the ball during a golf driver swing. Background : There were not enough studies that analyzed the correlation between physical factors(X-factor, X-factor stretch) and club factors(club speed, ball speed, club path, smash factor, launch angle, spin rate, flight time, total length) during a purpose swing to increase total distance. Method : For this study, 9 right handed professional male golfers (KPGA) were chosen. The test subject group used their own drivers and each took a total of 10 swings. These swings consisted of 5 purpose swings to increase total distance and 5 normal swings. Results : The purpose swing to increase total distance showed larger physical factors(X-factor, X-factor stretch) compared to a normal swing however the results were not statistically significant. Total distance increased during a purpose swing as a result of ball and club speed. Conclusion : The results showed that club factors, ball speed and club speed contributed the most in affecting the total distance of the ball during a purpose swing.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1518-1518
• /
• 2001

In the area of the destruction-free NIR analysis of fruit and vegetables development has not yet progressed as far as in grain and similar products. One reason for that is, that in contrast to grains, in fruit and vegetables water appears as the outstanding main-component making up typically 80% by weight of the fruit. Of the M absorption spectrum of pure water the bands at 1450, 970 and 760 nm are the first, second and third overtones respectively of O-H stretch while those at 1940 and 1190 are combination bands involving O-H stretch and O-H bend. The choice of band for spectrometry is governed by considerations of sensitivity and selectivity. The overtone bands are satisfactory for use in moisture measurements from 0 to 4 % depending on path length. Measurements in fruits and vegetables at wavelength areas that are also important for the determination of carbohydrates (sucrose, glucose, fructose) often lead to total absorption in the presence of significant water even if short path lengths are possible. In this work model systems are used containing different carbohydrates in solvents like heavy water (D$_2$O) or dimethylsulfoxide (DMSO) that do not contain O-H functional groups.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.546-553
• /
• 2012

Compact routing intends to achieve good tradeoff between the routing path length and the memory overhead, and is recently considered as a main alternative to overcome the fundamental scaling problems of the Internet routing system. Plenty of studies have been conducted on compact routing, and quite a few universal compact routing schemes have been designed for arbitrary network topologies. However, it is generally believed that specialized compact routing schemes for peculiar network topologies can have better performance than universal ones. Studies on complex networks have uncovered that most real-world networks exhibit power-law degree distributions, i.e., a few nodes have very high degrees while many other nodes have low degrees. High-degree nodes play the crucial role of hubs in communication and inter-networking. Based on this fact, we propose two highest-degree landmark based compact routing schemes, namely HDLR and $HDLR^+$. Theoretical analysis on random power-law graphs shows that the two schemes can achieve better space-stretch trade-offs than previous compact routing schemes. Simulations conducted on random power-law graphs and real-world AS-level Internet graph validate the effectiveness of our schemes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.268-271
• /
• 2000

In these days, the technical advances and complexities have generated much of the difficulties in managing the project resources, both time and costing to accomplish the project in the most efficient manner. The project manager is frequently required to render judgements concerning the schedule and resource adjustments. This research develops an analytical model for a schedule-cost and risk analysis based on visual PERT/CPM. We used a two-step approaches ：in the step 1, a deterministic PERT/CPM model for the critical path and estimating the project time schedule and related resource planning, In the second step, we developed a heuristic model for crash and stretch out analysis based upon a time-cost trade-off associated with the crash and stretch out of the project. Computer implementation of this model is provided based on GUI-Type objective-oriented programming for the users and provided displays of all the inputs and outputs in the form of visual graphical. Also developed GUI-type program, Dongeui Visual-PERT/CPM. The results of this research will provide the project managers with an efficient management tool.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.529-536
• /
• 1991

In this paper, the question whether the curvature of the minimum energy path can affect the dynamic threshold was tested using the boundary trajectory method developed by Chesnavich and coworkers. For nonreactive system, the MO EXP model potential surface was used with modified equilibrium distance to control the curvature. The results showed that there is no relation between the curvature and the dynamic threshold. In order to study the reactive system, a generalization of the boundary trajectory method was achieved to apply on the nonsymmetric system. We have found no correspondence between the curvature and the dynamic threshold of the system. It was also shown that the fate of the trajectories strongly depends on the shape of potential surface around the turning points along the symmetric stretch line.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.35-42
• /
• 2009

One of the problems we face up at the time of planning or improving a transportation transfer facility is which modes and how close we have to put together. The goal here is to keep the connecting transportation mode as close as possible to the prime transit mode, so people travel a minimum transfer path, a distance from one mode to another. Too much a physical separation between modes will limit, even with an intensive improvement of the component links, the level of service of a transfer path as a whole. This study defined a transfer path as the whole stretch of the distance from an arrival point of one mode to the departure point of the connecting mode. The transfer path was divided into three typical segments as side walk, stairways, and indoor corridors. Preference surveys were made for each of these segments, resulting in relative resistance. The sum of individual segments weighted with the relative resistance will make a transfer resistance of the path, which in turn constitutes a transfer utility function together with the overall satisfaction score obtained by the interview survey. The transfer utility function has been utilized to evaluate the transfer distance between modes.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.1
• /
• pp.97-113
• /
• 2003

In numerous studios of Technology Acceptance Model ( TAM ), the social Influence construct has been operationalized as subjective norm. This study Proposes to stretch two construct to Include two more constructs : image and visibility. This paper also questions about the paths regarding this comprehensive construct. Due to the controversies regarding the significance of social Influence on IS usage, this study taps the possibility that social influence works as an antecedent to PU (Perceived Usefulness) and PEU ( Perceived Ease of Use) We could find the significant differences In path coefficients depending on how social Influence Is operationalzied.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.48-59
• /
• 1990

A finite element program was developed using line elements for simulating the stretch/draw forming operation of an arbitrarily-shaped plane-strain section. An implicit, incremental, updated Lagrangian formulation is employed, introducing a minimum plastic work path assumption for each time step. Geometric and material nonlinearities are also considered within each time step. The finite element equation is based on the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The membrane approximation is adopted under the plane stress assumption. The sheet material is assumed to obey a rigid-viscoplastic constitutive law. The developed program was tested in the die-tryout of typical automotive inner panels. In order to determine a single friction coefficient and boundary length, FEM results and measurements of thinning for a stretched section of final die were compared. After finding analysis parameters, the sheet forming operations of original and final die designs were simulated. Excellent agreement between measured and computed thickness strains was obtained and the developed program was able to identify die designs which were rejected during die tryout.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.446-459
• /
• 2016

In this paper, we propose virtual direction multicast (VDM) for video multicast applications on peer-to-peer overlay networks. It locates the end hosts relative to each other based on a virtualized orientation scheme using real-time measurements. It builds multicast tree by connecting the nodes, which are estimated to be in the same virtual direction. By using the concept of directionality, we target to use minimal resources in the underlying network while satisfying users' quality expectations. We compare VDM against host multicast tree protocol.We simulated the protocol in a network simulator and implemented in PlanetLab. Results both from simulation and PlanetLab implementation show that our proposed technique exhibits good performance in terms of defined metrics.