• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2011

Wireless mesh network technology with transmission speeds similar to wired and wireless technology means to build, compared with wired networks, building a more efficient network to provide convenience and flexibility. The wireless mesh network router nodes in the energy impact of the mobility is less constrained and has fewer features entail. However, the characteristics of various kinds due to network configuration settings and the choice of multiple paths that can occur when the system overhead and there are many details that must be considered. Therefore, according to the characteristics of these network routing technology that is reflected in the design and optimization of the network is worth noting. In this paper, a multi-path setting can be raised in order to respond effectively to the problem of the router node data loss and bandwidth according to traffic conditions and links to elements of the hop count evaluation by using a genetic algorithm as a workaround for dynamic routing the routing metric for wireless mesh network scheme is proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.408-422
• /
• 2000

In this paper, we propose a generalized vector channel model for wireless communication systems using antenna arrays. The proposed channel model reflects path loss. spatial-temporal variation of shadowing, multipath fading , Doppler effect, spatial distribution of local scatterers and delay spread due to remote dominant scatterers. In addition, we use a discrete ray model in which respective ray signal experiences independent shadowing, fading and Doppler shift, and impinges on antenna arrays at a distinct angle. Based on the proposed mode. we derive the relations on the spatial and temporal correlations of the received signals and implement a spatial channel simulator. By comparing the theoretical values with the simulated ones, we verify the effectiveness of the implemented simulator. The simulator is then used to generate an arbitrary channel impulse response and to analyze the channel characteristics under various environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.941-949
• /
• 2011

In a cooperative communication system with a source node and multiple relays equipping single antenna and a destination node equipping multiple antennas, the selective cooperative spatial multiplexing scheme can obtain spatial multiplexing gain and additional selection diversity gain. But it can degrade a bit error rate performance because some received symbols forwarded from particular relays may be lost by attenuation due to path-loss. We propose a relay and transmission mode selection scheme which selects minimum number of multiple relays having the channel capacity larger than a given data rate and transmission mode which switches spatial multiplexing and spatial diversity mode in cooperation phase to enhance the bit error rate performance. The proposed scheme achieves 1.5~2dB gain at the low SNR range compared with the conventional scheme by obtaining additional spatial diversity gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1086-1093
• /
• 2001

A new linearization technique for RF high-power amplifiers(HPAs) using n-th order error signal generator (ESGn) is proposed. The n-th order ESG generates an error signal based on the complex envelope transfer characteristics of the HPA, which is combined at the output of the HPA. Therefore, the higher-order nonlinearlities are not affected by the ESG$\_$n/ and the stability of the linearized system is guaranteed due to the inherent open-loop configuration. Moreover, the output delay loss can be avoided, because the error signal is generated with the input signal of the HPA. The IMD(intermodulation distortion) improvement obtained applying the ESG$\_$7/ to 5 W class A HPA in cellular band demonstrates the feasibility of the proposed postdistortion system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.60-71
• /
• 1998

The propagation environment is effected by Rayleigh fading, Rician fading, path loss and lognormal shadowing in microcellular mobile radio system. In these surroundings we analysed the performance on received Rician signals among L Rician interferers and the characteristics of lognormal shadowing for various parameters such as reuse distance, cluster size, signal to interference power ratio and protection ratio using outage probability. We also studied various channels Rayleigh signal and Rician interferer, Rician signal and Rayleigh interferer, Rician signal and Rician interferer and so on using outage probability. The theoretical extention and computer simulation effectively analysed the characteristic of lognormal shadowed Rician channel.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.47-55
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint has been increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an enclosure to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation from the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. To shut out sound emitted from transformers, we developed a soundproof technology that wall up reinforcing bar by steel sheet. For the practical application of it, we analyzed the vibration characteristics of a transformer tank and reduction of noise according to soundproof plate. As a result, it is confirmed that the technology can reduce 11 [dB] of transformer noise.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.817-838
• /
• 2014

Test environment on the company that handles a large amount of data such as telecommunications companies and financial institutions, may not always be the same as the production environment, which is caused by conversion of important columns about information and limitation of storage capacity due to the construction cost. Therefore, SQL performance degradation that occurs when the test and production environments are not the same, which is an important cause of connecting to the unexpected failures of online transactions, and it generates financial loss of business, customer complaints, a decrease in reliability. In studies related SQL performance, it has so far been conducted mainly studies of tuning associated with DBMS Optimizer, and it has not been addressed issues of this sector. Therefore, in this paper, I verify the validity about presentation of the advanced SQL Performance-based IT application change management process, in order to prevent failures of the online transactions associated with poor performance of SQL generated by differences in test and production environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.853-866
• /
• 2008

In this paper, a multi-hop relaying transmission scheme is analyzed regarding its feasibility and potentiality in the IEEE 802.22-based cognitive radio (CR) environment. Shortly, basic design issues are addressed such as relay station (RS) deployment and a frame structure of physical channel to escape inter-hop interference. This paper mainly develops a radio resource management scheme based on spectrum sensing results aggregated from CR secondary nodes and improves the opportunistic spectrum sharing efficiency. In particular, a decision rule about a channel availability is made using a distributed sensing method. Subsequently, spectrum allocation and routing path decision procedures are proposed to establish a link from source to destination with a hop-by-hop manner. Simulation results show that the proposed multi-hop relaying scheme is substantially profitable in CR environments if the number of hops and RS deployment are designed in such a way that the spectrum sharing gain is larger than spectrum division loss which is inherently induced in multi-hop relaying systems.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.875-882
• /
• 2002

The active packets unlike traditional IP packets should be executed at each active node along their path. To execute the active program at each active node, the active packets for an active program should go through the same active nodes and all packets are delivered without any loss. This paper presents the new active engine for every active packet which execute an active program to be routed through the same intermediate active nodes and to be delivered reliably. Proposed active engine requires fewer changes to existing IP protocols and guarantees the reliable delivery of the active packets. Moreover, even if the sender does not have any information about the intermediate nodes every active packet is routed through the same intermediate active nodes. The simulation results show that proposed active engine achieves an efficient transmission with high data delivery and low communication overhead compared with the other existing transmission protocols.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.26-33
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding one switcher, one lossless snubber quasi-resonance capacity to power source for general welding machine This full-bridge soft switching DC-DC convoter· topology can applicable 600[V] switching device (IGBT)incase of AC 400[V] common power source because the voltage of active switcher is 1/2 of DC bus line voltage. And low voltage hight current out)ut that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.