Design of Postdistortion Linearizer using Complex Envelope Transfer Characteristics of Power Amplifier

전력 증폭기의 복소 포락선 전달특성을 이용한 Postdistortion 방식의 선형화기의 설계

  • 한재희 (서울대학교 전기·컴퓨터공학부) ;
  • 이덕희 (서울대학교 전기·컴퓨터공학부) ;
  • 남상욱 (서울대학교 전기·컴퓨터공학부) ;
  • 남상욱 (서울대학교 전기·컴퓨터공학부) ;
  • 임종식 (서울대학교 전기·컴퓨터공학부)
  • Published : 2001.12.01

Abstract

A new linearization technique for RF high-power amplifiers(HPAs) using n-th order error signal generator (ESGn) is proposed. The n-th order ESG generates an error signal based on the complex envelope transfer characteristics of the HPA, which is combined at the output of the HPA. Therefore, the higher-order nonlinearlities are not affected by the ESG$\_$n/ and the stability of the linearized system is guaranteed due to the inherent open-loop configuration. Moreover, the output delay loss can be avoided, because the error signal is generated with the input signal of the HPA. The IMD(intermodulation distortion) improvement obtained applying the ESG$\_$7/ to 5 W class A HPA in cellular band demonstrates the feasibility of the proposed postdistortion system.

본 논문에서는 n차 오차신호발생기(error signal generator)를 이용한 postdistortion 방식의 RF 전력증폭기의 선형화 기법을 제안하였다. n차 ESG(error signal generator)는 전력증폭기의 기저대역 등가 복소 전달함수를 바탕으로 오차신호를 발생시켜, 이를 전력증폭기의 출력 단에서 n차 이하의 비선형성만을 제거한다. 따라서, 출력 단의 n차 이상의 혼변조 왜곡(intermodulation distortion) 성분에 영향을 미치지 않으며, 개루프(open-loop) 형태이므로 시스템의 안정성을 보장할 수 있다. 또한, 전력증폭기의 입력 신호를 이용하여 오차신호를 발생시키므로 feedforward 방식에서와 같이 오차신호 발생에 따른 주신호 경로(main signal path)의 시간지연 회로가 불필요하다. 실험 결과로 7차 ESG를 이용한 postdistorter를 최대 출력이 5 W인 셀룰러 대역 A급 증폭기에 적용한 경우의 혼변조 왜곡 개선도와 3-carrier CDMA 신호를 이용한 측정 결과를 제시하여 본 방법의 타당성을 검증하였다.

Keywords

References

  1. IEEE Trans. Veh. Technol. v.41 no.1 An adaptive predistorter for a power amplifier based on adjacent channel emissions S. P. Stapleton;F. C. Costescu
  2. IEEE Trans. Veh. Technol. v.39 no.4 Amplifier linearization using a digital predistorter with fast adaptation and low memory requirements J. K. Cavers
  3. Microwave & RF v.37 no.12 Methods linearize RF transmitters and power amps-linearization techniques, part Ⅰ P. B. Kenington
  4. Microwave & RF v.38 no.1 Methods linearize RF transmitters and power amps-linearization techniques, part Ⅱ P. B. Kenington
  5. Principles of Communications R. E. Ziemer;W. H. Tranter
  6. Communication Systems S. Haykin
  7. Introduction to Random Processes W. A. Gardner
  8. Feedforward Linear Power Amplifiers N. Pothecary